Contaminated or infected patients present a risk of cross-contamination for emergency responders, attending medical personnel and medical facilities as they enter a treatment facility. The controlled conditions of an aerosol test chamber are required to examine factors of contamination, decontamination, and cross-contamination. This study presents the design, construction, and a method for characterizing an aerosol test chamber for a full-sized manikin on a standard North Atlantic Treaty Organization litter. The methodology combined air velocity measurements, aerosol particle counts and size distributions, and computational fluid dynamics modeling to describe the chamber’s performance in three dimensions. This detailed characterization facilitates future experimental design by predicting chamber performance for a variety of patient-focused research.
References
[1]
Dexter, F., Elhakim, M., Loftus, R.W., Seering, M.S. and Epstein, R.H. (2020) Strategies for Daily Operating Room Management of Ambulatory Surgery Centers Following Resolution of the Acute Phase of the COVID-19 Pandemic. Journal of Clinical Anesthesia, 64, Article ID: 109854. https://doi.org/10.1016/j.jclinane.2020.109854
[2]
Ti, L.K., Ang, L.S., Foong, T.W. and Ng, B.S.W. (2020) What We Do When a COVID-19 Patient Needs an Operation: Operating Room Preparation and Guidance. Canadian Journal of Anesthesia, 67, 756-758. https://doi.org/10.1007/s12630-020-01617-4
[3]
Osborn, L., Meyer, D., Dahm, P., Ferguson, B., Cabrera, R., Sanger, D., Mock, M., Herrera, T., Mader, S. and Ostrosky-Zeichner, L. (2020) Integration of Aeromedicine in the Response to the COVID-19 Pandemic. JACEP Open, 1, 557-562. https://doi.org/10.1002/emp2.12117
[4]
Yousuf, B., Sujatha, K.S., Alfoudri, H. and Mansurov, V. (2020) Transport of Critically Ill COVID-19 Patients. Intensive Care Medicine, 46, 1663-1664. https://doi.org/10.1007/s00134-020-06115-1
[5]
Krist, A.H., DeVoe, J.E., Cheng, A., Ehrlich, T. and Jones, S.M. (2020) Redesigning Primary Care to Address the COVID-19 Pandemic in the Midst of the Pandemic. Annals of Family Medicine, 18, 349-354. https://doi.org/10.1370/afm.2557
[6]
Chilcott, R.P., Larner, J., Durrant, A., Hughes, P., Mahalingam, D., Rivers, S. and Reppucci, J. (2019) Evaluation of US Federal Guidelines (Primary Response Incident Scene Management [PRISM]) for Mass Decontamination of Casualties during the Initial Operational Response to a Chemical Incident. Annals of Emergency Medicine, 73, 671-684. https://doi.org/10.1016/j.annemergmed.2018.06.042
[7]
Schilling, S., Follin, P., Jarhall, B., Tegnell, A., Lastilla, M., Bannister, B. and Puro, V. (2009). European Concepts for the Domestic Transport of Highly Infectious Patients. Clinical Microbiology and Infection, 15, 727-733. https://doi.org/10.1111/j.1469-0691.2009.02871.x
[8]
Titus, E., Lemmer, G., Slagley, J. and Eninger, R. (2019) A Review of CBRN Topics Related to Military and Civilian Patient Exposure and Decontamination. American Journal of Disaster Medicine, 14, 137-149. https://doi.org/10.5055/ajdm.2019.0324
[9]
Su, W.C., Tolchinsky, A.D., Chen, B.T., Sigaev, V.I. and Cheng, Y.S. (2012) Evaluation of Physical Sampling Efficiency for Cyclone-Based Personal Bioaerosol Samplers in Moving Air Environments. Journal of Environmental Monitoring, 14, 2430-2437. https://doi.org/10.1039/c2em30299c
[10]
Upton, S.L., Mark, D., Douglass, E.J., Hall, D.J. and Griffiths, W.D. (1994) A Wind Tunnel Evaluation of the Physical Sampling Efficiencies of Three Bioaerosol Samplers. Journal of Aerosol Science, 25, 1493-1501. https://doi.org/10.1016/0021-8502(94)90220-8
[11]
King, M.D., Thien, B.F., Tiirikainen, S. and McFarland, A.R. (2009) Collection Characteristics of a Batch-Type Wetted Wall Bioaerosol Sampling Cyclone. Aerobiologia, 25, 239-247. https://doi.org/10.1007/s10453-009-9129-3
[12]
Emanuel, P.A., Buckley, P.E., Sutton, T.A., Edmonds, J.M., Bailey, A.M., Rivers, B.A. and Gibbons, H.S. (2012) Detection and Tracking of a Novel Genetically Tagged Biological Simulant in the Environment. Applied and Environmental Microbiology, 78, 8281-8288. https://doi.org/10.1128/AEM.02006-12
[13]
Hagerman, I., Isaxon, C., Gudmundsson, A., Wierzbicka, A., Dierschke, K., Berglund, M., Pagels, J., Nielsen, J., Assarsson, E., Andersson, U.B.K., Xu, Y., Jonsson, B.A.G. and Bohgard, M. (2014) Effects on Heart Rate Variability by Artificially Generated Indoor Nano-Sized Particles in a Chamber Study. Atmospheric Environment, 88, 165-171. https://doi.org/10.1016/j.atmosenv.2014.02.003
[14]
Isaxon, C., Dierschke, K., Pagels, J.H., Wierszbicka, A., Gudmundsson, A., Löndahl, J., Hagerman, I., Berglund, M., Assarsson, E., Andersson, U.B., Jonsson, B.A.G., Nojgaard, J.K., Eriksson, A., Nielsen, J. and Bohgard, M. (2013) Realistic Indoor Nano-Aerosols for a Human Exposure Facility. Journal of Aerosol Science, 60, 55-66. https://doi.org/10.1016/j.jaerosci.2013.02.003
[15]
Lidén, C., Lundgren, L., Skare, L., Lidén, G., Tornling, G. and Krantz, S. (1998) A New Whole-Body Exposure Chamber for Human Skin and Lung Challenge Experiments—The Generation of Wheat Flour Aerosols. Annals of Occupational Hygiene, 42, 541-547. https://doi.org/10.1016/S0003-4878(98)00063-5
[16]
Lundgren, L. (2006) Large Organic Aerosols in a Human Exposure Chamber: Applications in Occupational Dermatology and Lung Medicine. Doctoral Thesis, Karolinska Institutet, Solna. http://hdl.handle.net/10616/39694
[17]
Rønborg, S.M., Mosbech, H., Johnsen, C.R. and Poulsen, L.K. (1996) Exposure Chamber for Allergen Challenge: The Development and Validation of a New Concept. Allergy: European Journal of Allergy and Clinical Immunology, 51, 82-88. https://doi.org/10.1111/j.1398-9995.1996.tb04562.x
[18]
Lundgren, L., Skare, L., Lidén, C. and Tornling, G. (2006) Large Organic Aerosols in a Dynamic and Continuous Whole-Body Exposure Chamber Tested on Humans and on a Heated Mannequin. Annals of Occupational Hygiene, 50, 705-715.
[19]
Pieretti, L.F. and Hammad, Y.Y. (2018) Performance of a Whole-Body Human Dust Inhalation Challenge Exposure Chamber. Toxicology Reports, 5, 793-799. https://doi.org/10.1016/j.toxrep.2018.07.004
[20]
Li, J., Yavuz, I., Celik, I. and Guffey, S. (2007) Predicting Worker Exposure—The Effect of Ventilation Velocity, Free-Stream Turbulence and Thermal Condition. Journal of Occupational and Environmental Hygiene, 4, 864-874. https://doi.org/10.1080/15459620701665688
[21]
Lin, C.H., Dunn, K.H., Horstman, R.H., Topmiller, J.L., Ahlers, M.F., Bennett, J.S., Sedgwick, L.M. and Wirogo, S. (2005) Numerical Simulation of Airflow and Airborne Pathogen Transport in Aircraft Cabins—Part I: Numerical Simulation of the Flow Field. ASHRAE Transactions, 111, 755-763.
[22]
Lucci, F., Castro, N.D., Rostami, A.A., Oldham, M.J., Hoeng, J., Pithawalla, Y.B. and Kuczaj, A.K. (2018) Characterization and Modeling of Aerosol Deposition in Vitrocell® Exposure Systems—Exposure Well Chamber Deposition Efficiency. Journal of Aerosol Science, 123, 141-160. https://doi.org/10.1016/j.jaerosci.2018.06.015
[23]
Zhang, Y., Sun, Y., Wang, A., Topmiller, J.L. and Bennett, J.S. (2005) Experimental Characterization of Airflows in Aircraft Cabins, Part II: Results and Research Recommendations. ASHRAE Transactions, 111, 53-59.
[24]
White, F.M. (2011) Fluid Mechanics. 7th Edition, McGraw-Hill, New York.
[25]
Lai, A.C. and Chen, F. (2006) Modeling Particle Deposition and Distribution in a Chamber with a Two-Equation Reynolds-Averaged Navier-Stokes Model. Journal of Aerosol Science, 37, 1770-1780. https://doi.org/10.1016/j.jaerosci.2006.06.008
[26]
NATO (National Atlantic Treaty Organization) (2013) Stretchers, Bearing Brackets and Attachment Supports. NATO Standard AMedP-2.1.
[27]
Baldwin, P.E.J. and Maynard, A.D. (1998) A Survey of Wind Speeds in Indoor Workplaces. Annals of Occupational Hygiene, 42, 303-313. https://doi.org/10.1016/S0003-4878(98)00031-3
[28]
Bennett, J., Marlow, D., Nourian, F., Breay, J., Feng, A. and Methner, M. (2018) Effect of Ventilation Velocity on Hexavalent Chromium and Isocyanate Exposures in Aircraft Paint Spraying. Journal of Occupational and Environmental Hygiene, 15, 167-181. https://doi.org/10.1080/15459624.2017.1401710
Hinds, W.C. (1999) Aerosol Technology: Properties, Behavior, and Measurement of Airborne Particles. 2nd Edition, John Wiley and Sons, Inc., Hoboken.
[32]
International Organization for Standardization (2019) Cleanrooms and Associated Controlled Environments—Part 3: Test Methods (ISO Standard No. 14644-3: 2019). https://www.iso.org/obp/ui/#iso:std:iso:14644:-3:ed-2:v2:en
[33]
Steele, M.L. (2020) Assessing Challenges Associated with Sampling Hexavalent Chromium under New Consensus Guidelines. Theses and Dissertations, Air Force Institute of Technology, Wright-Patterson AFB, No. 3256. https://scholar.afit.edu/etd/3256
[34]
Ohms, S.A. (2020) Development and Characterization of a Filter-Based Bioaerosol Sampler Capable of Integration into Small Unmanned Aerial Systems. Theses and Dissertations, Air Force Institute of Technology, Wright-Patterson AFB, No. 3249. https://scholar.afit.edu/etd/3249
[35]
Chapman, J.M. (2021) Re-Aerosolization of Dense Metal Oxide Simulating Radiological Contamination from Military Clothing. Theses and Dissertations, Air Force Institute of Technology, Wright-Patterson AFB, No. 4940. https://scholar.afit.edu/etd/4940
