|
|
取芯法检测混凝土强度与混凝土实际强度相关性的研究
|
Abstract:
本文研究了取芯法检测的混凝土强度偏离混凝土实际强度的影响因素，诸如混凝土芯样端面形式，直径大小，端面修补方法及修补材料等，介绍了国外相关的研究资料，提出了修正建议。
This paper studies the influence factors of the concrete strength deviation from the actual strength of concrete, such as the concrete core sample end surface form, diameter size, end surface repair method and repair materials. Relevant foreign research materials are introduced. Recommendations for amendments were made.
| [1] | Petersons, N. (1968) Should Standard Cube Test Specimens Be Replaced by Test Specimens Taken from Structures. Matériaux et Construction, 1, 425-435. https://doi.org/10.1007/BF02473740 |
| [2] | Malhotra, V.M. (1977) Contract Strength Requirements: Cores Versus in Situ Evaluation. Journal of the American Concrete Institute, 74, 163-172. https://doi.org/10.14359/10998 |
| [3] | Murphy, W.E. (1977) Discussion of Reference 8.99. Journal of the American Concrete Institute, 74, 523-525. |
| [4] | ACI Committee 301 (1971) Specifications for Structural Concrete for Buildings (ACI 301-72). Journal of the American Concrete Institute, 68, 413-450. (72, No. 7, 361-362, Revised 1975). |
| [5] | Bellander, U. (1978) Strength in Concrete Structure, CBI Reports 1:78. Swedish Cement and Concrete Research Institute, 15. |
| [6] | 中华人民共和国标准, 钻芯法检测混凝土强度技术规程(JGJ/T384-2016) [S]. 北京: 中国建筑工业出版社, 2016. |
| [7] | [英] A. M. 内维尔, 著. 混凝土的性能[M]. 李国泮, 马贞勇, 译. 北京: 中国建筑工业出版社, 1983. |
| [8] | Jaegermann, C. and Bentur, A. (1977) Development of Destructive and Non-Destructive Testing Methods for Quality Control of Hardened Concrete on Building Sites and in Precast Factories. Research Report No. 017-196, Israel Institute of Technology Building Research Station, Haifa. |
| [9] | Bungey, J.H. (1979) Determining Concrete Strength by Using Small-Diameter Core. Magazine of Concrete Research, 31, 91-98. https://doi.org/10.1680/macr.1979.31.107.91 |
