|
|
Applied Physics 2022
基于微组装工艺SPDT开关研究与设计
|
Abstract:
随着通信技术的发展，要求通信设备向小型化发展，而微组装工艺技术是目前设备小型化的重要手段。本文详细设计了基于微组装的SPDT开关，利用HFSS和ADS仿真工具对SPDT开关进行优化仿真，仿真结果较好，插损小于0.15 dB，隔离度大于49 dB。从理论上验证了基于微组装SPDT开关设计方法的正确性，具有一定指导意义。
With the development of communication technology, communication equipment is required to develop for miniaturization, and micro-assembly process technology is an important means of equipment miniaturization. In this paper, the SPDT switch based on micro-assembly is designed in detail, and the SPDT switch is optimized and simulated by HFSS and ADS simulation tools, and the simulation results are good, the insertion loss is less than 0.15 dB, and the isolation is greater than 49 dB. Theoretically, the correctness of the design method based on the micro-assembled SPDT switch is verified, which has certain guiding significance.
| [1] | 朱艳. 5G通信基站大功率射频开关设计[J]. 通信电源技术, 2021, 38(5): 3 p. |
| [2] | 肖宁, 秦立峰, 张选, 等. X波段氮化镓小型化T/R组件的设计与实现[J]. 无线电工程, 2017, 47(11): 63-66. |
| [3] | 侯一雪, 乔海灵, 廖智利. 混合电路基板与外壳的共晶焊技术[J]. 电子与封装, 2007, 7(8): 9-11. |
| [4] | 胡永芳, 韩宗杰. 大功率微波芯片共晶焊接工艺技术[J]. 电子机械工程, 2020, 36(5): 51-54. |
| [5] | 金明. 一种X波段多通道T/R组件设计[J]. 雷达与对抗, 2019, 39(3): 54-57. |
| [6] | 雷素茵, 朱烨, 王家波. Ku波段T/R组件的设计[J]. 现代信息科技, 2017, 1(1): 73-75. |
| [7] | https://www.skyworksinc.com/-/media/SkyWorks/Documents/Products/1-100/Design_With_PIN_Diodes_200312E.pdf |
| [8] | https://www.jedec.org/standards-documents/docs/jesd-59 |
| [9] | https://cdn.macom.com/datasheets/GaAs_pindiodechips.pdf |
| [10] | 王世辉. S波段高功率T/R组件的研究[D]: [硕士学位论文]. 南京: 南京理工大学, 2005. |
| [11] | 张琦, 苏东林, 张德智. 基于LTCC多层基板的X波段T/R组件小型化设计[J]. 现代电子技术, 2017, 30(1): 55-57. |
