|
燃煤炉渣粉对粉煤灰–炉渣混凝土的影响
|
Abstract:
研究燃煤炉渣粉掺量(外掺含量分别为胶凝材料的0%、5%、10%、15%、20%)对粉煤灰–炉渣混凝土物理力学性能的影响。试验结果表明:随着燃煤炉渣粉掺量的增加,混凝土抗压强度、劈裂抗拉强度、轴心抗压强度等呈现逐渐上升的趋势,从掺量和强度综合考虑,燃煤炉渣粉掺量为20%可以配制56 d抗压强度为37.19 MPa混凝土;混凝土的吸水率随着燃煤炉渣粉掺量的增大而增大,该研究对于燃煤炉渣粉在工程中的应用具有一定价值。
Abstract
The effect of the content of coal-fired slag powder (0%, 5%, 10%, 15% and 20% of cementitious material respectively) on the physical and mechanical properties of fly ash-slag concrete was studied. The test results show that with the increase of the content of coal-fired slag powder, the compressive strength, splitting tensile strength and axial compressive strength of concrete show a gradual upward trend. Considering the content and strength, when the content of coal-fired slag powder is 20%, the concrete with 56 d compressive strength of 37.19 MPa can be prepared; the water absorption rate of concrete increases with the increase of the content of coal-fired slag powder. This study has certain value for the application of coal-fired slag powder in engineering.
[1] | 刘炜震, 郭忠平, 何维胜, 侯树宏, 胡文博. 燃煤炉渣混凝土材料配比及强度特性试验研究[J]. 矿业研究与开发, 2020, 40(5): 56-59. |
[2] | 聂品. 再生骨料透水混凝土的路用性能研究[D]: [硕士学位论文]. 郑州: 华北水利水电学院, 2012. |
[3] | 傅垣洪. 建筑垃圾综合利用技术推广与应用[J]. 能源与节能, 2017(12): 99-100+180. |
[4] | 宋远明, 钱觉时, 王智. 燃煤灰渣活性研究综述[J]. 粉煤灰, 2007, 19(1): 44-46. |
[5] | 宋远明, 钱觉时, 王智. 燃煤灰渣火山灰反应活性[J]. 硅酸盐学报, 2006, 34(8): 962-965. |
[6] | 周俊龙, 杨德斌. 煤渣作混凝土掺和料的性能研究[J]. 粉煤灰综合利用, 2003(1): 22-23. |
[7] | 吴耀鸿. 预拌混凝土中燃煤炉渣掺合料的应用研究[J]. 江西建材, 2016(14): 2+7. |
[8] | 李燕. 沸腾炉渣用作混凝土掺和料的试验研究[D]: [硕士学位论文]. 杭州: 浙江工业大学, 2009. |
[9] | 潘攀, 欧阳东, 易承波, 宁博, 鲁刘磊, 吴亭亭. 煤渣粉对高性能混凝土性能的影响[J]. 混凝土与水泥制品, 2011(6): 19-22. |
[10] | 中国人民共和国住房和城乡建设部. JGJ 55-2011. 普通混凝土配合比设计规程[S]. 北京: 中国建筑工业出版社出版, 2016. |
[11] | 中国人民共和国住房和城乡建设部. GB/T 50080-2016. 普通混凝土拌合物性能试验方法标准[S]. 北京: 中国建筑工业出版社出版, 2016. |
[12] | 中国人民共和国住房和城乡建设部. GB/T 50081-2019. 混凝土物理力学性能试验方法标准[S]. 北京: 中国建筑工业出版社出版, 2016. |
[13] | Lin, K.L., Chang, W.C. and Lin, D.F. (2008) Pozzolantic Characteristics of Pulverized Incinerator Bottom Ash Slag. Construction and Building Materials, 22, 324-329. https://doi.org/10.1016/j.conbuildmat.2006.08.012 |