|
吸收法测定纺织品抗菌性能的不确定度评定
|
Abstract:
目的:建立纺织品抗菌性试验的不确定度分析方法。方法:以吸收法测定纺织品对金黄色葡萄球菌的抑菌值为例,分析不确定度来源;采用A类或B类方法评定各分量的不确定度;根据测量模型和不确定度传播律,求灵敏系数、相关系数,计算合成不确定度,确定扩展不确定度。结果:当抑菌值为3.13时,吸收法测定的扩展不确定度为0.73。结论:本文可为抗菌性吸收法的测量不确定度评估提供参考。
Objective: To establish an uncertainty analysis method for the determination of antibacterial activity of textile products. Methods: Taking the absorption method against Staphylococcus aureus as an example, the uncertainty source was analyzed, the uncertainty factors were evaluated by Type A or Type B, the sensitivity coefficient and the correlation coefficient can be gotten according to the measurement model and the uncertainty propagation law, the combined standard uncertainty was calculated, and the expanded uncertainty was reported. Results: The expanded uncertainty is 0.73 when the antibacterial activity value is 3.13. Conclusion: This paper provides reference for the uncertainty evaluation of the determination of antibacterial activity value.
[1] | 张明霞, 林志国, 吉黎明, 等. GB/T 27418-2017测量不确定度评定和表示[S]. 北京: 中国标准出版社, 2018. |
[2] | 叶德培, 赵峰, 施昌彦, 等. JJF 1059.1-2012测量不确定度评定和表示[S]. 北京: 中国标准出版社, 2013. |
[3] | 朱建敏, 周胜, 胡友森. 反应堆压力容器水位测量不确定度评定研究[J]. 核科学与技术, 2017, 5(1): 29-35. |
[4] | 邓昱, 张昕宇, 何涛, 等. 太阳能热水器热性能试验装置热性能测量不确定度分析[J]. 可持续能源, 2016, 6(1): 12-21. |
[5] | 郑宇英, 商成杰, 邹海清, 等. GB/T 20944.2-2007纺织品抗菌性能的评价第2部分: 吸收法[S]. 北京: 中国标准出版社, 2007. |
[6] | 胡力主. 纺织品抗菌性能与抗病毒性能评价方法比较[J]. 印染助剂, 2020(9): 62-64. |
[7] | 岳涛, 张秀杰, 郭艳丽. 灰色系统理论在化学检测不确定度评定中的应用[J]. 化学工程与技术, 2013(3): 199-202. |
[8] | Technical Committee ISO/TC 38 with CEN/TC 248 (2013) ISO 20743: 2013 Textiles-Determination of Antibacterial Activity of Textile Products. International Organization for Standardization, Switzerland. |
[9] | 日本一般社团法人纤维评价技术协议会. JIS L 1902:2015纤维制品的抗菌性试验方法及抗菌效果[S]. 东京: 一般财团法人日本规格协会, 2015. |
[10] | 王俊起, 王友斌, 薛金荣, 等. 纺织品抗菌功能测试方法研究[J]. 中国卫生工程学, 2003(8): 129-132. |
[11] | 李志培, 邓明义. SN 0168-92出口食品平板菌落计数[S]. 北京: 中国标准出版社, 1992. |