|
|
Applied Physics 2021
高热导率和机械稳定性的La(Fe,Si)13/Cu制备及热、磁、机械性能研究
|
Abstract:
La(Fe,Si)13磁热材料居里温度仅有210 K左右，远低于室温，需要对其进行吸氢处理，使得材料的居里温度升至室温附近。然而La(Fe,Si)13块体在吸氢过程中材料的体积会发生膨胀，导致其破碎成粉末。本研究采用化学镀和热压的方法制备出了La(Fe,Si)13/Cu复合材料，并借助显微镜、X射线衍射仪、能谱仪、综合物性测量系统等研究了其显微形貌、磁相变行为、导热性能及机械强度。本研究获得的具有网格状导热通道的La(Fe,Si)13/Cu磁热复合材料的热导率和抗压强度显著提高。由此可见，本研究所提出的新结构和制备方法也适用于其他磁热材料，并且将显著提高其磁热性能中的热性能和力学性能，从而为磁制冷机和热磁发电机的商业化铺平道路。
The Curie temperature (TC) of the La(Fe,Si)13 magnetocaloric material is about 210 K, far below room temperature. Hydrogenation is needed to raise the TC to room temperature. However, the La(Fe,Si)13 bulk materials will break into powders after hydrogenation due to the volume expansion during hydrogenation. In the present work, La(Fe,Si)13/Cu magnetocaloric composite have been successful synthesized by electroless plating and hot pressing. The microscopic morphology, magnetic phase transition behavior, thermal conductivity and mechanical strength have been studied using microscope, X-ray diffractometer, energy dispersive spectroscope and physical property measurement system, etc. The La(Fe,Si)13/Cu magnetocaloric composite with continuous Cu network significantly improve the thermal conductivity and compressive strength. The proposed novel microstructure and synthesis methods are also applicable to other magnetocaloric materials, which will significantly improve the thermal and mechanical properties of magnetocaloric properties and hence pave the way for the commercialization of magnetic refrigerators and thermomagnetic generators.
| [1] | Gschneidner, K.A. and Pecharsky, V.K. (2000) Magnetocaloric Materials. Annual Review of Materials Science, 30, 387-429. https://doi.org/10.1146/annurev.matsci.30.1.387 |
| [2] | Zhang, H., Sun, Y.J., Niu, E., Hu, F.X., Sun, J.R. and Shen, B.G. (2014) Enhanced Mechanical Properties and Large Magnetocaloric Effects in Bonded La(Fe,Si)13-Based Magnetic Refrigeration Materials. Applied Physics Letters, 104, Article No. 062407. https://doi.org/10.1063/1.4865236 |
| [3] | Hu, F.X., Shen, B.G., Sun, J.R., Cheng, Z.H. (2001) Influence of Negative Lattice Expansion and Metamagnetic Transition on Magnetic Entropy Change in the Compound LaFe11.4Si1.6. Applied Physics Letters, 78, 3675-3677.
https://doi.org/10.1063/1.1375836 |
| [4] | Lai, J.W., Huang, B.W., Miao, X.F., et al. (2019) Combined Effect of Annealing Temperature and Vanadium Substitution for Magnetocaloric Mn1.2-xVxFe0.75P0.5Si0.5 Alloys. Journal of Alloys and Compounds, 803, 671-677.
https://doi.org/10.1016/j.jallcom.2019.06.239 |
| [5] | Dung, N.H., Zhang, L., Ou, Z.Q., Zhao, L., van Eijck, L., Mulders, A.M., Avdeev, M., Suard, E., van Dijk, N.H. and Brück, E. (2012) High/Low-Moment Phase Transition in Hexagonal Mn-Fe-P-Si Compounds. Physics Review B, 86, Article No. 045134. https://doi.org/10.1103/PhysRevB.86.045134 |
| [6] | Hu, S.Y., Miao, X.F., Liu, J., Ou, Z.Q., Cong, M.Q., Haschuluu, O., Gong, Y.Y., Qian, F.J., You, Y.R., Zhang, Y.J., Xu, F. and Brück, E. (2019) Small Hysteresis and Giant Magnetocaloric Effect in Nb-Substituted (Mn,Fe)2(P,Si) Alloys. Intermetallics, 114, Article No. 106602. https://doi.org/10.1016/j.intermet.2019.106602 |
| [7] | Fujieda, S., Fujita, A., Fukamichi, K., Yamazaki, Y. and Iijima, Y. (2001) Giant Isotropic Magnetostriction of Itinerant- Electron Metamagnetic La(Fe0.88Si0.12)13Hy Compounds. Applied Physics Letters, 79, 653-655.
https://doi.org/10.1063/1.1388157 |
| [8] | Lyubina, J., Hannemann, U., Cohen, L.F. and Ryan, M.P. (2012) Novel La(Fe,Si)13/Cu Composites for Magnetic Cooling. Advanced Energy Materials, 2, 1323-1327. https://doi.org/10.1002/aenm.201200297 |
| [9] | You, C., Wang, S., Zhang, J., Yang, N. and Tian, N. (2016) Improvement of Magnetic Hysteresis Loss, Corrosion Resistance and Compressive Strength Through Spark Plasma Sintering Magnetocaloric LaFe11.65Si1.35/Cu Core-Shell Powders. AIP Advances, 6, Article No. 055321. https://doi.org/10.1063/1.4952757 |
| [10] | Zhang, H., Liu, J., Zhang, M., Shao, Y., Li, Y. and Yan, A. (2016) LaFe11.6Si1.4Hy/Sn Magnetocaloric Composites by Hot Pressing. Scripta Materialia, 120, 58-61. https://doi.org/10.1016/j.scriptamat.2016.04.021 |
