全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...

多空隙沥青混合料及其胶结料的应用与研究现状
The Application and Research Status of Porous Asphalt Mixture and Its Binder

DOI: 10.12677/AEP.2021.114079, PP. 698-707

Keywords: 道路工程,多孔沥青混合料,高黏沥青,橡胶沥青,应用与研究现状
Road Engineering
, Porous Asphalt Mixture, High Viscosity Asphalt, Rubber Asphalt, Application and Research Status

Full-Text   Cite this paper   Add to My Lib

Abstract:

国内外研究表明多空隙沥青路面凭借其较大空隙率具有透排水与降噪功能。文中通过总结多空隙沥青路面在国内外的发展应用现状,发现影响多空隙沥青混合料性能最为重要的因素是使用的沥青胶结料的性能要足以满足其大空隙率的特性。介绍了几种可用于多空隙沥青混合料的胶结料发现其推广应用的最大阻碍是过于高昂的造价,因而在发现橡胶沥青可以基本满足多空隙沥青混合料胶结料要求的前提下,提出采用橡胶粉和高黏改性剂对基质沥青进行复合改性,一方面可以减少高黏改性剂的用量降低成本,另一方面也可以合理利用废旧轮胎。如此既节约了成本又使轮胎废弃物得到再次利用,实现节能减排和环境保护。
Researches at home and abroad show that porous asphalt pavement has the functions of water permeability and noise reduction by virtue of its large void ratio. By summarizing the development and application status of multi void asphalt pavement at home and abroad, it is found that the most important factor affecting the performance of multi void asphalt mixture is that the performance of asphalt binder should be enough to meet the characteristics of large porosity. This paper introduces several kinds of binders which can be used in multi void asphalt mixture. It is found that the biggest obstacle to its popularization and application is too high cost. Therefore, on the premise that rubber asphalt can basically meet the requirements of multi void asphalt mixture binder, it is proposed to use rubber powder and high viscosity modifier to modify the base asphalt. On the one hand, it can reduce the amount of high viscosity modifier and reduce the cost; on the other hand, it can also make rational use of waste tires. In this way, not only the cost is saved, but also the tire waste is reused to achieve energy conservation and environmental protection.

References

[1]  中华人民共和国交通部. JTG F40-2004. 公路沥青路面施工技术规范[S]. 北京: 人民交通出版社, 2004.
[2]  中华人民共和国行业标准. JTJ052-2000. 公路工程沥青及沥青混合料试验规程[S]. 北京: 人民交通出版社, 2000.
[3]  中华人民共和国行业标准. CJJ/T 190-2012. 透水沥青路面技术规程[S]. 北京: 中国建筑工业出版社, 2012.
[4]  陈拴发, 陈华鑫, 郑木莲. 沥青混合料设计与施工[M]. 北京: 化学工业出版社, 2006.
[5]  Wopara, F.O. (2018) Prediction of Flow and Transport Properties in Porous Media. International Journal of Gas & Coal Technology, 17, 284-303.
https://doi.org/10.1504/IJOGCT.2018.090144
[6]  蒋玮. 透水性沥青路面混合料配合比设计方法与路用性能研究[D]: [硕士学位论文]. 西安: 长安大学, 2008: 6.
[7]  Lala, A.M.S. (2018) Modifications to the Kozeny-Carman Model to Enhance Petrophysical Relationships. Exploration Geophysics, 49, 553-558.
[8]  马国栋. 透水混凝土路面渗流与堵塞数值模拟[D]: [硕士学位论文]. 济南: 山东大学, 2019.
[9]  肖鑫. 排水沥青混合料细观结构及排水特性[D]: [博士学位论文]. 广州: 华南理工大学, 2014.
[10]  肖鑫, 张肖宁. 基于工业CT的排水沥青混合料连通空隙特征研究[J]. 中国公路学报, 2016, 29(8): 22-28.
[11]  彭庆华. 排水沥青路面在遂广高速公路的应用研究[J]. 公路交通科技(应用技术版), 2016(6): 27-28.
[12]  Zhou, C.H., Liu, S.H. and Yuan, Q. (2014) Experience of Replacing Basalt Aggregate by Limestone’s in Porous Asphalt Concrete. Advanced Materials Research, 1025-1026, 749-754.
https://doi.org/10.4028/www.scientific.net/AMR.1025-1026.749
[13]  许斌. 排水沥青路面预防性养护技术研究[D]: [博士学位论文]. 辽宁: 大连理工大学, 2016: 10.
[14]  曹东伟. 排水沥青路面[M]. 北京: 人民交通出版社, 2010.
[15]  苗杰. 低渗煤岩大孔隙结构三维重构及渗流模拟[D]: [硕士学位论文]. 焦作: 河南理工大学, 2017.
[16]  李翔, 蔡旭, 肖天佑. 排水路面沥青混合料的连通空隙影响分析[J]. 华侨大学学报(自然科学版), 2019, 40(2): 186-191.
[17]  蒋玮, 沙爱民, 肖晶晶, 王振军. 多孔沥青混合料的细观空隙特征与影响规律[J]. 同济大学学报(自然科学版), 2015, 43(1): 67-74.
[18]  郭芳, 谭海洲, 邵腊庚. 基于沥青路面早期水损害的水-荷载耦合CT扫描试验和力学响应分析[J]. 公路交通科技, 2014, 31(10): 38-44.
[19]  王宏畅, 葛辉, 周明刚. 基于常水头渗透试验的PAC排水和抗堵塞能力[J]. 东南大学学报(自然科学版), 2016, 46(1): 209-214.
[20]  谢西, 姜成, 林晨彤, 赵金辉. 透水混凝土路面堵塞及其恢复效果研究[J]. 中外公路, 2019, 39(1): 46-49.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133