|
|
Material Sciences 2021
热褪火温度对ZnO纳米棒阵列/活性炭纤维复合材料催化性能的影响
|
Abstract:
本文采用溶胶–凝胶–水热法在活性炭纤维基底上制备了定向生长的ZnO纳米棒阵列，通过快速热褪火方式对该复合催化剂进行改性处理，利用扫描电子显微镜、X射线衍射、氮气物理吸附等手段分析了改性前后催化剂的形貌及结构特征，同时考察了催化剂对亚甲基蓝的暗吸附和光催化效率。研究结果表明，快速热褪火处理显著提高了ZnO纳米棒阵列/活性炭纤维的暗吸附和光催化性能。当热褪火温度为450℃时，经120 min暗吸附和40 min光催化反应后该催化剂对亚甲基蓝的总去除率高达95.8%。
The ZnO nanorod arrays were assembled on the activated carbon fibers by combining sol-gel with a hydrothermal method, and rapid thermal annealing was used to modify the composite catalysts. The structural characteristics of the catalysts were analyzed by scanning electron microscopy, X-ray diffraction and nitrogen physisorption, and meanwhile the dark adsorption and photocatalytic efficiency of the catalysts for methylene blue were investigated. The results showed that the dark adsorption and photocatalytic performance of the ZnO nanorod arrays/activated carbon fibers were significantly improved by rapid thermal annealing. When the thermal annealing temperature was 450℃, the total removal efficiency of methylene blue on the catalyst reached 95.8% after 120 min of dark adsorption and 40 min of photocatalytic reaction.
| [1] | Zhang, Y.Z., Xu, J.P. and Shi, S.B. (2016) Development of Solution-Processed ZnO Nanorod Arrays Based Photode-tectors and the Improvement of UV Photoresponse via AZO Seed Layers. ACS Applied Materials & Interfaces, 8, 22647-22657. https://doi.org/10.1021/acsami.6b06700 |
| [2] | Chakrabarti, S. and Dutta, B.K. (2004) Photocatalytic Degradation of Model Textile Dyes in Wastewater Using ZnO as Semiconductor Catalyst. Journal of Hazardous Ma-terials, 112, 269-278. https://doi.org/10.1016/j.jhazmat.2004.05.013 |
| [3] | Lu, F., Cai, W.P. and Zhang, Y.G. (2008) ZnO Hierarchical Micro/Nanoarchitectures: Solvothermal Synthesis and Structurally Enhanced Photocatalytic Performance. Advanced Functional Materials, 18, 1047-1056.
https://doi.org/10.1002/adfm.200700973 |
| [4] | 刘春闱, 万阳, 卓盛海. ZnO纳米棒阵列生长机理及光催化性能研究[J]. 材料科学, 2018(8): 482-489.
https://doi.org/10.12677/MS.2018.85054 |
| [5] | Lin, J.Y., Chou, Y.T. and Shen, J.L. (2011) Effects of Rapid Thermal Annealing on the Structural Properties of TiO2 Nanotubes. Applied Surface Science, 258, 530-534. https://doi.org/10.1016/j.apsusc.2011.08.073 |
| [6] | Jan, K., Vitaly, Z.Z. and Michael, S. (2018) Effect of Surface and Defect Chemistry on the Photocatalytic Properties of Intentionally Defect-Rich ZnO Nanorod Arrays. ACS Applied Materials & Interfaces, 10, 17994-18004.
https://doi.org/10.1021/acsami.8b05130 |
| [7] | Luo, S., Liu, C.W. and Zhou, S. (2020) ZnO Nanorod Arrays As-sembled on Activated Carbon Fibers for Photocatalytic Degradation: Characteristics and Synergistic Effects. Chemo-sphere, 261, Article ID: 127731.
https://doi.org/10.1016/j.chemosphere.2020.127731 |
| [8] | Raizada, P., Singh, P. and Kumar, A. (2014) Solar Pho-tocatalytic Activity of Nano-ZnO Supported on Activated Carbon or Brick Grain Particles: Role of Adsorption in Dye Degradation. Applied Catalysis A: General, 486, 159-169.
https://doi.org/10.1016/j.apcata.2014.08.043 |
| [9] | Matos, J., Laine, J. and Herrmann, J.M. (1998) Synergy Effect in the Photocatalytic Degradation of Phenol on a Suspended Mixture of Titania and Activated Carbon. Applied Catalysis B: Environmental, 18, 281-291.
https://doi.org/10.1016/S0926-3373(98)00051-4 |
| [10] | Zhang, X.Y., Qin, J.Q. and Xue, Y.N. (2013) Effect of As-pect Ratio and Surface Defects on the Photocatalytic Activity of ZnO Nanorods. Scientific Reports, 4, 1-8. https://doi.org/10.1038/srep04596 |
