Wishbone Arm Of The Bushes Loading Output Affective Investigation Of The Parameters

Surface roughness and firmness values were determined by bending the measured bushings. It was modeled using the Solid Works program for simulation and solved in the simulation part of the program. The coefficient of friction between the steel bushing and the aluminum bushing was 0.61, while the 8681.7 Newtons were 0.3 and 4102, 2, respectively. In the analysis, von mises stress, which was obtained at an ideal 179 micron, made it healthy for us to make reasoning about the displacement force of the bushing by averaging the yield stresses of 317,8 and 370,4 mPa materials. When the analyzes were examined, it was found that the coefficient of friction was as effective as the tightness values