Alignment Control of Nematic Liquid Crystal using Gold Nanoparticles Grafted by the Liquid Crystalline Polymer with Azobenzene Mesogens as the Side Chains

The gold nanoparticles highly grafted by a liquid crystalline polymer (LCP) with azobenzene mesogens as the side chain (denoted as [email protected] NPs) are successfully designed and synthesized by the two-phase Brust–Schiffrin method. The chemical structures of the monomer and polymer ligands have been confirmed by nuclear magnetic resonance, and the molecular weight of the polymer is determined by gel permeation chromatography. The combined analysis of transmission electron microscopy and thermogravimetric analysis shows that the size of the nanoparticles is 2.5(±0.4) nm and the content of the gold in the [email protected] NPs is ca. 17.58%. The resultant [email protected] NPs can well disperse in the nematic LC of 5CB. The well-dispersed mixture with appropriate doping concentrations can automatically form a perfect homeotropic alignment in the LC cell. The homeotropic alignment is attributed to the brush formed by [email protected] NPs on the substrate, wherein the [email protected] NPs gradually diffuse onto the substrate from the mixture. On the contrary, the pure side chain LCPs cannot yield vertical alignment of 5CB, which indicates that the alignment of 5CB is ascribed to the synergistic interaction of the nanoparticles and the grafted LCPs. Moreover, [email protected] NPs show excellent film-forming property on account of their periphery of high densely grafted LCPs, which can form uniform thin film by spin-coating. The resultant thin film also can prompt the automatical vertical alignment of the nematic 5CB. Further, upon alternative irradiation of UV and visible light, the alignment of 5CB reversibly switches between vertical and random orientation because of the trans–cis photoisomerization of the azobenzene group on the periphery of [email protected] NPs. These experimental results suggest that this kind of nanoparticles can be potentially applied in constructing the remote-controllable optical devices