Design and Implementation of Automated Predictive Magnetic Abrasive Finishing Machine

Magnetic abrasive ？nishing (MAF) is one of the non-traditional methods, that produce high quality condition of surface roughness (Ra) and is primarily controlled by magnetic field. This process can remove materials depending on magnetic energy.The aims of this research have been made to design and implement MA automated predictive machine, which plays an important role to the values of parameters (voltage of electromagnetic, magnetic pole velocity, working gap, and working time) to obtain the desired values for Ra.The microcontroller (Arduino Mega) was used for controlling the four parameters, and can predict the working time from regression model using optimum values parameters. The automated machine can be programmed to control the electromagnetic voltage, the poles rotation, working gap, turn on and off the rotation of workpiece, and working time.The results indicated that the optimum parameters for the surface roughness are calculated according to Taguchi method and the S/N ratio, and the optimum values before automated the machine are voltage (7V), the working time (7min), poles speed (30r.p.m) and the working gap (1mm) for Ra. The results also indicated that the predict values for Ra is nearly equal to the values from the automated machine about 95% for Ra, that mean the automated predictive MA machine are very efficient