All Title Author
Keywords Abstract

Publish in OALib Journal
ISSN: 2333-9721
APC: Only $99


Relative Articles


Texture of Rotary-Friction-Welded from Dissimilar Medium Carbon Steels

DOI: 10.4236/wjcmp.2020.104011, PP. 178-190

Keywords: Texture, Rotary Friction Welding, Medium Carbon Steels

Full-Text   Cite this paper   Add to My Lib


The purpose of the present study was to investigate the texture in dissimilar medium carbon steels welded by rotary friction technique. The Electron Backscatter Diffraction (EBSD) technique was the main technique used to investigate the effect of welding on grain size and grain crystallographic orientation in the welded joint. Moreover, the effect of isothermal heat treatment at 600°C on welded joint has been studied knowing that this annealing allows to decrease the residual stresses. EBSD results revealed different subzones in welded joint. The texture in the weld is essentially composed of three components: Goss {110} <001>, Rotated Cube {100} <110>, and Rotated Goss {110} <110> orientation. The heat treatments applied on welded material had a slight effect on texture and grain size.


[1]  Zhou, Y., Li, Z., Hu, L., Fuji, A. and North, T.H. (1995) Mechanical Properties of Particulate MMO/AISl304 Friction Joints. ISIJ International, 35, 1315-1321.
[2]  ASM Handbook (1971) Welding, Brazing, and Soldering. 8th Edition, Vol. 6.
[3]  Shete, N. and Deokar, S.U. (2017) A Review Paper on Rotary Friction Welding. International Conference on Ideas, Impact and Innovation in Mechanical Engineering, 5, 1557-1560.
[4]  Li, W.Y., Vairis, A., Preuss, M. and Ma, T.J. (2016) Linear and Rotary Friction Welding Review. International Materials Reviews, 61, 71-100.
[5]  Maalekian, M. (2007) Friction Welding-Critical Assessment of Literature. Science and Technology of Welding and Joining, 12, 738-759.
[6]  Delijaicova, S., Silvaa, P.A.O., Resende, H.B. and Batalhab, M.H.F. (2018) Effect of Weld Parameters on Residual Stress, Hardness and Microstructure of Dissimilar AA2024-T3 and 3AA7475-T761 Friction Stir Welded Joints. Materials Research, 21, 1-11.
[7]  Cai, W., Daehn, G., Vivek, A., Li, J., Khan, H., Mishra, R.S. and Komarasamy, M. (2019) A State of the Art Review on Solid-State Metal Joining. Journal of Manufacturing Science and Engineering, 141, Article ID: 031012.
[8]  Radosław, W. (2016) Effect of Friction Welding Parameters on the Tensile Strength and Microstructural Properties of Dissimilar AISI 1020-ASTM A536 Joints. The International Journal of Advanced Manufacturing Technology, 84, 941-955.
[9]  Haribabu, S., Cheepu, M., Tammineni, L., Gurasala, N., Devuri, V. and Kantumuchu, V. (2019) Dissimilar Friction Welding of AISI 304 Austenitic Stainless Steel and AISI D3 Tool Steel: Mechanical Properties and Microstructural Characterization. In: Advances in Materials and Metallurgy, Springer, Singapore, 271-281.
[10]  Zdemira, N.O., Sarsılmaz, F. and Hascalık, A. (2007) Effect of Rotational Speed on the Interface Properties of Friction Welded AISI 304L to 4340 Steel. Materials and Design, 28, 301-307.
[11]  Gaikwad, V.T., Mishra, M.K., Hiwarkar, V.D. and Singh, R.K.P. (2020) Microstructure and Mechanical Properties of Friction Welded Carbon Steel (EN24) and Nickel Based Superalloy (IN718). International Journal of Minerals, Metallurgy and Materials.
[12]  Gan, W., Hofmann, M., Ventzke, V., Randau, C., Huang, Y., Kriele, A., Brokmeier, H.G. and Mueller, M. (2017) Microstructure and Residual Stress in Rotary Friction Welded Dissimilar Metals of AA7020 Aluminum Alloy with 316L Steel. Materials Science Forum, 879, 572-577.
[13]  Priymak, E., Atamashkin, A. and Stepanchukova, A. (2019) Effect of Post-Weld Heat Treatment on the Mechanical Properties and Mechanism of Fracture of Joint Welds Made by Thompson Friction Welding. Materials Today: Proceedings, 11, 295-299.
[14]  Priymak, E., Boumerzoug, Z., Stepanchukova, A. and Ji, V. (2020) Residual Stresses and Microstructural Features of Rotary-Friction-Welded from Dissimilar Medium C Steels. The Physics of Metals and Metallography, 121, 119-126.
[15]  Hu, H. (1974) Texture of Metals. Texture, 1, 233-258.
[16]  Stütz, M., Buzolin, R., Pixner, F., Poletti, C. and Enzinger, N. (2019) Microstructure Development of Molybdenum during Rotary Friction Welding. Materials Characterization, 151, 506-518.
[17]  Schwartz, M.M. (1979) Friction Welding, Metals Joining Manual. McGraw-Hill Book Company, New York.
[18]  Damodaram, R., Raman, S.G.S. and Rao, K.P. (2013) Microstructure and Mechanical Properties of Friction Welded Alloy 718. Materials Science and Engineering: A, 560, 781.
[19]  Wang, Y., Shao, W.Z., Zhen, L. and Zhang, X.M. (2008) Microstructure Evolution during Dynamic Recrystallization of Hot Deformed Superalloy 718. Materials Science and Engineering: A, 486, 321-332.
[20]  Dhinwal, S.S., Toth, L.S., Hodgson, P.D. and Haldar, A. (2018) Effects of Processing Conditions on Texture and Microstructure Evolution in Extra-Low Carbon Steel During Multi-Pass Asymmetric Rolling. Materials, 11, 1327.
[21]  Inagaki, H. (1994) Fundamental Aspect of Texture Formation in Low Carbon Steel. ISIJ International, 34, 313-321.
[22]  Rahimi, S., Wynne, B.P. and Baker, T.N. (2017) Development of Microstructure and Crystallographic Texture in a Double-Sided Friction Stir Welded Microalloyed Steel. Journal of Metallurgical and Materials Transactions A, 48, 362-378.
[23]  Engler, O. and Randle, V. (2010) Introduction to Texture Analysis, Macrotexture, Microtexture and Orientation Mapping. Second Edition, Taylor and Francis Group, Abingdon-on-Thames.


comments powered by Disqus

Contact Us


WhatsApp +8615387084133

WeChat 1538708413