ZnS assisted Zn doping in CdZnS electrodeposition

Department of Chemistry Many reports have been published elsewhere on making thin films of cadmium zinc sulphide (CdZnS) using different techniques. This article summarizes a method developed to form CdZnS by incorporating electrodeposited Cd and S atoms simultaneously to the chemically formed ZnS material in the electrolytic bath at the conducting surface of fluorine doped tin oxide (FTO) coated glass substrate. Moreover, the mechanism of formation of CdZnS is proposed as a solid state reaction between electrodeposited Cd and S atoms on the glass/FTO substrate with adsorbed ZnS particles from the electrolytic bath. The precursors used for Cd, S and ZnS in the electrolyte were aqueous solutions of CdCl2, ZnCl2 and Na2S2O3. Two different methods were tested to form ZnS within the electrolyte bath where one forming ZnS in the bath at the beginning of electrodeposition of Cd and S and in the other one, ZnS is formed before the electrodeposition of Cd and S. The results of the band gap measurements show an undulation which is closer to the band gap energy of CdS indicating probable codeposition of one or more materials such as CdS, (2.42 eV), ZnS (3.7 eV), CdO (2.2 eV), and ZnO (3.2 eV) along with CdZnS.