Fiber reinforced composite (FRC) requires a process of grinding, mixing and compounding natural fibers from cellulosic waste streams into a polymer matrix that creates a high-strength fiber composite. In this situation, the specified waste or base raw materials used are the waste thermoplastics and different types of cellulosic waste including rice husk and saw dust. FRC is a high-performance fiber composite achieved and made possible through a proprietary molecular re-engineering process by interlinking cellulosic fiber molecules with resins in the FRC material matrix, resulting in a product of exceptional structural properties. In this feat of molecular re-engineering, selected physical and structural properties of wood are effectively cloned and obtained in the FRC component, in addition to other essential qualities in order to produce superior performance properties to conventional wood. The dynamic characteristics of composite structures are largely extracted from the reinforcing of fibres. The fiber, held in place by the matrix resin, contributes to tensile strength in a composite, enhancing the performance properties in the final part, such as strength and rigidity, while minimizing weight. The advantages of composite materials always beat down their disadvantages. In this analysis, we tried to find out FRC advance manufacturing, recycling technology and future perspective for mankind and next generation development. This research will bring a new horizon for future science with FRC technology and every aspect of modern science which will bring a stable dimensional stability by recycling process with minimizing waste for environment and next generation science.
References
[1]
Voyiadjis, G.Z. and Kattan, P.I. (1993) Damage of Fiber-Reinforced Composite Materials with Micromechanical Characterization. International Journal of Solids and Structures, 30, 2757-2778. https://doi.org/10.1016/0020-7683(93)90153-X
[2]
Rahman, M., et al. (1999) Machinability Study of Carbon Fiber Reinforced Composite. Journal of Materials Processing Technology, 89-90, 292-297. https://doi.org/10.1016/S0924-0136(99)00040-0
[3]
Chandrasekharan, V., Kapoor, S.G. and Devor, R.E. (1995) A Mechanistic Approach to Predicting the Cutting Forces in Drilling: with Application to Fiber-Reinforced Composite Materials. Journal of Engineering for Industry, 117, 559-570. https://doi.org/10.1115/1.2803534
[4]
Tan, P. and Tong, L. (2001) Micro-Electromechanics Models for Piezoelectric-Fiber-Reinforced Composite Materials. Composites Science and Technology, 61, 759-769. https://doi.org/10.1016/S0266-3538(01)00014-8
[5]
Farley, G.L. and Jones, R.M. (1992) Crushing Characteristics of Continuous Fiber-Reinforced Composite Tubes. Journal of Composite Materials, 26, 37-50. https://doi.org/10.1177/002199839202600103
[6]
Lin, S.C. and Chen, I.K. (1996) Drilling Carbon Fiber-Reinforced Composite Material at High Speed. Wear, 194, 156-162. https://doi.org/10.1016/0043-1648(95)06831-7
[7]
Dyer, S.R., et al. (2005) Effect of Cross-Sectional Design on the Modulus of Elasticity and Toughness of Fiber-Reinforced Composite Materials. The Journal of Prosthetic Dentistry, 94, 219-226. https://doi.org/10.1016/j.prosdent.2005.06.008
[8]
Wang, X., et al. (2011) Effects of Interphase Properties in Unidirectional Fiber Reinforced Composite Materials. Materials & Design, 32, 3486-3492. https://doi.org/10.1016/j.matdes.2011.01.029
[9]
Fraternali, F., et al. (2015) A Tensegrity Approach to the Optimal Reinforcement of Masonry Domes and Vaults through Fiber-Reinforced Composite Materials. Composite Structures, 134, 247-254. https://doi.org/10.1016/j.compstruct.2015.08.087
[10]
Siddhartha and Gupta, K. (2012) Mechanical and Abrasive Wear Characterization of Bidirectional and Chopped E-Glass Fiber Reinforced Composite Materials. Materials & Design, 35, 467-479. https://doi.org/10.1016/j.matdes.2011.09.010
[11]
Lin, W.-P. and Hu, H.-T. (2002) Nonlinear Analysis of Fiber-Reinforced Composite Laminates Subjected to Uniaxial Tensile Load. Journal of Composite Materials, 36, 1429-1450. https://doi.org/10.1177/0021998302036012463
[12]
Lee, J.D. (1980) Three Dimensional Finite Element Analysis of Layered Fiber-Reinforced Composite Materials. Computers & Structures, 12, 319-339. https://doi.org/10.1016/0045-7949(80)90030-9
[13]
Rosner Charles, N. and Rizkalla Sami, H. (1995) Bolted Connections for Fiber-Reinforced Composite Structural Members: Experimental Program. Journal of Materials in Civil Engineering, 7, 223-231. https://doi.org/10.1061/(ASCE)0899-1561(1995)7:4(223)
[14]
El Kadi, H. (2006) Modeling the Mechanical Behavior of Fiber-Reinforced Polymeric Composite Materials Using Artificial Neural Networks—A Review. Composite Structures, 73, 1-23. https://doi.org/10.1016/j.compstruct.2005.01.020
[15]
Stango, R.J. and Wang, S.S. (1984) Process-Induced Residual Thermal Stresses in Advanced Fiber-Reinforced Composite Laminates. Journal of Engineering for Industry, 106, 48-54. https://doi.org/10.1115/1.3185910
Soutis, C. (2005) Carbon Fiber Reinforced Plastics in Aircraft Construction. Materials Science and Engineering: A, 412, 171-176. https://doi.org/10.1016/j.msea.2005.08.064
[18]
Nokes, J.P. andCloud, G.L. (1993) The Application of Interferometric Techniques to the Nondestructive Inspection of Fiber-Reinforced Materials. Experimental Mechanics, 33, 314-319. https://doi.org/10.1007/BF02322147
[19]
Sprenger, S. (2013) Improving Mechanical Properties of Fiber-Reinforced Composites Based on Epoxy Resins Containing Industrial Surface-Modified Silica Nanoparticles: Review and Outlook. Journal of Composite Materials, 49, 53-63. https://doi.org/10.1177/0021998313514260
[20]
Kerstens, S., Decraemer, W.F. and Verbelen, J.-P. (2001) Cell Walls at the Plant Surface Behave Mechanically Like Fiber-Reinforced Composite Materials. Plant Physiology, 127, 381-385. https://doi.org/10.1104/pp.010423
[21]
Natali, A., Manzi, S. and Bignozzi, M.C. (2011) Novel Fiber-Reinforced Composite Materials Based on Sustainable Geopolymer Matrix. Procedia Engineering, 21, 1124-1131. https://doi.org/10.1016/j.proeng.2011.11.2120
[22]
Rahimizadeh, A., et al. (2019) Recycling of Fiberglass Wind Turbine Blades into Reinforced Filaments for Use in Additive Manufacturing. Composites Part B: Engineering, 175, Article ID: 107101. https://doi.org/10.1016/j.compositesb.2019.107101
[23]
Lima, P.R.L., et al. (2018) Short Sisal Fiber Reinforced Recycled Concrete Block for One-Way Precast Concrete Slabs. Construction and Building Materials, 187, 620-634. https://doi.org/10.1016/j.conbuildmat.2018.07.184
[24]
Hagnell, M.K. and Åkermo, M. (2019) The Economic and Mechanical Potential of Closed Loop Material Usage and Recycling of Fibre-Reinforced Composite Materials. Journal of Cleaner Production, 223, 957-968. https://doi.org/10.1016/j.jclepro.2019.03.156
[25]
Menges, G. (1994) New Developments in Chemical Recycling as a Sink for Problematic Waste from Fiber-Reinforced Plastics. Journal of Thermoplastic Composite Materials, 7, 64-74. https://doi.org/10.1177/089270579400700106
[26]
Dano, M.L. and Hyer, M.W. (2002) Snap-Through of Unsymmetric Fiber-Reinforced Composite Laminates. International Journal of Solids and Structures, 39, 175-198. https://doi.org/10.1016/S0020-7683(01)00074-9
[27]
Vallittu, P.K. and Sevelius, C. (2000) Resin-Bonded, Glass Fiber-Reinforced Composite Fixed Partial Dentures: A Clinical Study. The Journal of Prosthetic Dentistry, 84, 413-418. https://doi.org/10.1067/mpr.2000.109782
[28]
Fazzino, P. and Reifsnider, K. (2008) Electrochemical Impedance Spectroscopy Detection of Damage in out of Plane Fatigued Fiber Reinforced Composite Materials. Applied Composite Materials, 15, 127-138. https://doi.org/10.1007/s10443-008-9062-6
[29]
Hour, K.-Y. and Sehitoglu, H. (1993) Damage Development in a Short Fiber Reinforced Composite. Journal of Composite Materials, 27, 782-805. https://doi.org/10.1177/002199839302700803
[30]
Khalili, S.M.R., Mittal, R.K. and Mohammad Panah, N. (2007) Analysis of Fiber Reinforced Composite Plates Subjected to Transverse Impact in the Presence of Initial Stresses. Composite Structures, 77, 263-268. https://doi.org/10.1016/j.compstruct.2005.08.027
[31]
Mathias, P.J., et al. (1989) Solid Particle Erosion of a Graphite-Fiber-Reinforced Bismaleimide Polymer Composite. Wear, 135, 161-169. https://doi.org/10.1016/0043-1648(89)90103-8
[32]
Tran, T.D., et al. (2012) Micromechanical Modelling for Onset of Distortional Matrix Damage of Fiber Reinforced Composite Materials. Composite Structures, 94, 745-757. https://doi.org/10.1016/j.compstruct.2011.09.009
[33]
Kalamkarov, A.L. andKolpakov, A.G. (1996) Design Problems for the Fiber-Reinforced Composite Materials. Composites Part B: Engineering, 27, 485-492. https://doi.org/10.1016/1359-8368(96)00029-7
[34]
Macaione, D.P. and Tewarson, A. (1990) Flammability Characteristics of Fiber-Reinforced Composite Materials. In: Nelson, G.L., Ed., Fire and Polymers, American Chemical Society, Washington DC, 542-565. https://doi.org/10.1021/bk-1990-0425.ch032
[35]
Taya, M. (1981) On Stiffness and Strength of an Aligned Short-Fiber Reinforced Composite Containing Penny-Shaped Cracks in the Matrix. Journal of Composite Materials, 15, 198-210. https://doi.org/10.1177/002199838101500301
[36]
Balzani, C. and Wagner, W. (2008) An Interface Element for the Simulation of Delamination in Unidirectional Fiber-Reinforced Composite Laminates. Engineering Fracture Mechanics, 75, 2597-2615. https://doi.org/10.1016/j.engfracmech.2007.03.013
[37]
Isbilir, O. and Ghassemieh, E. (2013) Numerical Investigation of the Effects of Drill Geometry on Drilling Induced Delamination of Carbon Fiber Reinforced Composites. Composite Structures, 105, 126-133. https://doi.org/10.1016/j.compstruct.2013.04.026
[38]
Oshima, A., Udagawa, A. and Morita, Y. (2001) Application of Radiation-Crosslinked Polytetrafluoroethylene to Fiber-Reinforced Composite Materials. Radiation Physics and Chemistry, 60, 467-471. https://doi.org/10.1016/S0969-806X(00)00416-3
[39]
Karadeniz, Z.H. and Kumlutas, D. (2007) A Numerical Study on the Coefficients of Thermal Expansion of Fiber Reinforced Composite Materials. Composite Structures, 78, 1-10. https://doi.org/10.1016/j.compstruct.2005.11.034
[40]
Penumadu, D. (2018) Durability of US Naval Composites and Sandwich Structures: Science Framework Considering Multiscale Response in Harsh Sea Environment. In: Davies, P. and Rajapakse, Y., Eds., Durability of Composites in a Marine Environment 2, Solid Mechanics and Its Applications, Springer, Cham, 59-74. https://doi.org/10.1007/978-3-319-65145-3_4
[41]
Ding, A., et al. (2018) Ageing of Sandwich Composites with E-Glass Fibre/Vinylester Skins and PVC Foam Core in Synergistic Environmental Agents. Composite Structures, 202, 253-260. https://doi.org/10.1016/j.compstruct.2018.01.071
[42]
Sahu, S.K., et al. (2018) Influence of Cell Size on out of Plane Stiffness and In-Plane Compliance Character of the Sandwich Beam Made with Tunable PCTPE Nylon Honeycomb Core and Hybrid Polymer Nanocomposite Skin. International Journal of Mechanical Sciences, 148, 284-292. https://doi.org/10.1016/j.ijmecsci.2018.08.011
[43]
Huijing, P.A. (1999) Muscle as a Collagen Fiber Reinforced Composite: A Review of Force Transmission in Muscle and Whole Limb. Journal of Biomechanics, 32, 329-345. https://doi.org/10.1016/S0021-9290(98)00186-9
[44]
Khot, N.S., et al. (1973) Optimization of Fiber Reinforced Composite Structures. International Journal of Solids and Structures, 9, 1225-1236. https://doi.org/10.1016/0020-7683(73)90113-3
[45]
Yuanjian, T. and Isaac, D.H. (2008) Combined Impact and Fatigue of Glass Fiber Reinforced Composites. Composites Part B: Engineering, 39, 505-512. https://doi.org/10.1016/j.compositesb.2007.03.005
[46]
Bisagni, C., et al. (2005) Progressive Crushing of Fiber-Reinforced Composite Structural Components of a Formula One Racing Car. Composite Structures, 68, 491-503. https://doi.org/10.1016/j.compstruct.2004.04.015
[47]
Pan, C.T. and Hocheng, H. (1996) The Anisotropic Heat-Affected Zone in the Laser Grooving of Fiber-Reinforced Composite Material. Journal of Materials Processing Technology, 62, 54-60. https://doi.org/10.1016/0924-0136(95)02192-2
[48]
Lourie, O. and Wagner, H.D. (1999) Evidence of Stress Transfer and Formation of Fracture Clusters in Carbon Nanotube-Based Composites. Composites Science and Technology, 59, 975-977. https://doi.org/10.1016/S0266-3538(98)00148-1
[49]
Aitasalo, K.M.J., et al. (2014) Craniofacial Bone Reconstruction with Bioactive Fiber-Reinforced Composite Implant. Head & Neck, 36, 722-728. https://doi.org/10.1002/hed.23370
[50]
Sathishkumar, T.P., Navaneethakrishnan, P. and Shankar, S. (2012) Tensile and Flexural Properties of Snake Grass Natural Fiber Reinforced Isophthallic Polyester Composites. Composites Science and Technology, 72, 1183-1190. https://doi.org/10.1016/j.compscitech.2012.04.001
[51]
Gu, J.-D., et al. (1996) Microbial Growth on Fiber Reinforced Composite Materials. International Biodeterioration & Biodegradation, 37, 197-204.
[52]
Pelletier, J.L. and Vel, S.S. (2006) Multi-Objective Optimization of Fiber Reinforced Composite Laminates for Strength, Stiffness and Minimal Mass. Computers & Structures, 84, 2065-2080. https://doi.org/10.1016/j.compstruc.2006.06.001
[53]
Xia, X.-K. andShen, H.-S. (2009) Nonlinear Vibration and Dynamic Response of FGM Plates with Piezoelectric Fiber Reinforced Composite Actuators. Composite Structures, 90, 254-262. https://doi.org/10.1016/j.compstruct.2009.03.018
[54]
Wagner, W. and Balzani, C. (2008) Simulation of Delamination in Stringer Stiffened Fiber-Reinforced Composite Shells. Computers & Structures, 86, 930-939. https://doi.org/10.1016/j.compstruc.2007.04.018
[55]
Latha, B., Senthilkumar, V.S. and Palanikumar, K. (2011) Modeling and Optimization of Process Parameters for Delamination in Drilling Glass Fiber Reinforced Plastic (GFRP) Composites. Machining Science and Technology, 15, 172-191. https://doi.org/10.1080/10910344.2011.579802
[56]
Weinmann, M., et al. (2000) Design of Polymeric Si-B-C-N Ceramic Precursors for Application in Fiber-Reinforced Composite Materials. Chemistry of Materials, 12, 2112-2122. https://doi.org/10.1021/cm001031w
[57]
Nasser, J., Steinke, K. and Sodano, H. (2020) ZnO Nanostructured Interphase for Multi-functional and Lightweight Glass Fiber Reinforced Composite Materials under Various Loading Conditions. ACS Applied Nano Materials, 3, 1363-1372. https://doi.org/10.1021/acsanm.9b02216
Liu, W., et al. (2005) Injection Molded Glass Fiber Reinforced Poly(Trimethylene Terephthalate) Composites: Fabrication and Properties Evaluation. Industrial & Engineering Chemistry Research, 44, 857-862. https://doi.org/10.1021/ie049112f
[60]
Yoshida, H. (1980) Viscoelastic Properties of Fiber-Reinforced Plastic. In: May, C.A., Ed., Resins for Aerospace, American Chemical Society, Washington DC, 247-256. https://doi.org/10.1021/bk-1980-0132.ch019
[61]
Tridech, C., et al. (2013) High Performance Composites with Active Stiffness Control. ACS Applied Materials & Interfaces, 5, 9111-9119. https://doi.org/10.1021/am402495n
[62]
Meng, F., et al. (2017) Environmental Aspects of Use of Recycled Carbon Fiber Composites in Automotive Applications. Environmental Science & Technology, 51, 12727-12736. https://doi.org/10.1021/acs.est.7b04069
[63]
Haque, M.M., et al. (2012) Chemical Treatment of Coir Fiber Reinforced Polypropylene Composites. Industrial & Engineering Chemistry Research, 51, 3958-3965. https://doi.org/10.1021/ie200693v
[64]
Xu, H., et al. (2014) Structural Basis for Unique Hierarchical Cylindrites Induced by Ultrahigh Shear Gradient in Single Natural Fiber Reinforced Poly(Lactic Acid) Green Composites. Biomacromolecules, 15, 1676-1686. https://doi.org/10.1021/bm500100z
[65]
Chen, C., Curliss, D. and Rice, B.P. (2005) Nanocomposite Aerospace Resins for Carbon Fiber-Reinforced Composites. In: Miziolek, A.W., Karna, S.P., Matthew Mauro, J. and Vaia, R.A., Eds., Defense Applications of Nanomaterials, American Chemical Society, Washington DC, 102-118. https://doi.org/10.1021/bk-2005-0891.ch007
[66]
Kuttner, C., et al. (2013) Influence of the Polymeric Interphase Design on the Interfacial Properties of (Fiber-Reinforced) Composites. ACS Applied Materials & Interfaces, 5, 2469-2478. https://doi.org/10.1021/am302694h
[67]
Haris, G. (2015) COMPETITIVENESS Federal Dollars Help Launch $250 Million Composites Research Hub. Chemical & Engineering News Archive, 93, 7. https://doi.org/10.1021/cen-09303-notw7
[68]
Karakassides, A., et al. (2020) Radially Grown Graphene Nanoflakes on Carbon Fibers as Reinforcing Interface for Polymer Composites. ACS Applied Nano Materials, 3, 2402-2413. https://doi.org/10.1021/acsanm.9b02536
[69]
Mikhalchan, A., et al. (2018) Revealing Chemical Heterogeneity of CNT Fiber Nanocomposites via Nanoscale Chemical Imaging. Chemistry of Materials, 30, 1856-1864. https://doi.org/10.1021/acs.chemmater.7b04065
[70]
Wetherhold, R.C. and Whitney, J.M. (1981) Tensile Failure of Notched Fiber-Reinforced Composite Materials. Polymer Composites, 2, 112-115. https://doi.org/10.1002/pc.750020306
[71]
Prokupek, L., et al. (2011) Sulphur-Vulcanized Polybutadiene as a Matrix in Glass Fiber-Reinforced Composite Materials. Journal of Applied Polymer Science, 119, 3446-3452. https://doi.org/10.1002/app.33042
[72]
Thomson, K.W. and Broutman, L.J. (1982) The Effect of Water on the Fracture Surface Energy of Fiber-Reinforced Composite Materials. Polymer Composites, 3, 113-117. https://doi.org/10.1002/pc.750030303
[73]
Dilandro, L., Dibenedetto, A.T. and Groeger, J. (1988) the Effect of Fiber-Matrix Stress Transfer on the Strength of Fiber-Reinforced Composite Materials. Polymer Composites, 9, 209-221. https://doi.org/10.1002/pc.750090308
[74]
Jacob, G.C., et al. (2006) Fracture Toughness in Random-Chopped Fiber-Reinforced Composites and Their Strain Rate Dependence. Journal of Applied Polymer Science, 100, 695-701. https://doi.org/10.1002/app.23414
[75]
Langrana, N.A., et al. (1994) Materials and Design Concepts for an Intervertebral Disc Spacer. I. Fiber-Reinforced Composite Design. Journal of Applied Biomaterials, 5, 125-132. https://doi.org/10.1002/jab.770050205
