|
|
EDTA浸取法从冶锌铁渣中回收锌
|
Abstract:
为了对冶锌铁渣中锌回收利用，以EDTA为浸取剂，对冶锌铁渣进行浸取实验，考察了EDTA浓度、温度、固液比及反应时间对锌浸出效果及选择性的影响。结果表明：EDTA浸取时对锌有较好的浸出率和选择性，能优先浸取锌。EDTA的浓度和液固比对浸取影响高度显著，浸取时间对结果有一定的影响，浸取温度对结果影响较小。在EDTA浓度为0.4 mol/L，浸出温度为20℃，固液比为6 L/kg的条件下反应浸取2 h，锌的浸出率达99.77%。
In order to investigate the leaching efficiency of zinc from iron-zinc slag via EDTA method, the ef-fects of initial concentration of ethylenediaminetetraacetic acid (EDTA), temperature , liquid-solid ratio and reaction time on the leaching rate and selectivity in process of leaching zinc from iron-zinc slag were studied. The results showed that EDTA method exhibited good leaching efficiency and selectivity of zinc, zinc was leached from iron-zinc slag preferentially. When the total EDTA concentration was 0.4 mol/L, the leaching temperature was 20？C, the ratio of leaching agent volume to zinc dust mass was 6 L/kg and the leaching time was 2 h, the extraction rate of zinc was 99.77%.
| [1] | 魏昶, 李存兄. 锌提取冶金学[M]. 北京: 冶金工业出版社, 2013: 8. |
| [2] | 邹晓勇, 彭清静, 吴贤文, 等. 锌产业技术及应用[M]. 北京: 化学工业出版社, 2019: 7. |
| [3] | Masambi, S., Dorfling, C. and Bradshaw, S. (2016) Comparing Iron Phosphate and Hematite Precipitation Processes for Iron Removal from Chloride Leach Solutions. Mineral Engi-neering, 98, 14-21. https://doi.org/10.1016/j.mineng.2016.07.001 |
| [4] | 王福生, 车欣. 浸锌渣综合利用现状及发展趋势[J]. 天津化工, 2010, 24(3): 1-3. |
| [5] | 姚芝茂, 赵丽娜, 徐成. 锌治炼工业有价金属回收潜力与现状分析[J]. 中国有色冶金, 2011(1): 49-54. |
| [6] | 闵小波, 张建强, 张纯, 等. 锌冶炼中浸渣锌还原浸出行为研究[J]. 有色金属科学与工程, 2015, 6(5): 1-6. |
| [7] | 张亚平. 从浸锌渣还原铁粉中回收镓锗的工艺及机理[D]: [硕士学位论文]. 长沙: 中南大学, 2003. |
| [8] | 王江伟, 彭清静. 氨浸法从冶锌铁渣中回收锌制备活性氧化锌[J]. 环境工程, 2019, 37(9): 165-170. |
| [9] | 武汉大学编写组. 分析化学第二版[M]. 北京: 高等教育出版社, 1982: 10. |
| [10] | 武汉大学编写组. 无机化学第二版[M]. 北京: 高等教育出版社, 1983: 4. |
| [11] | 张锡瑜. 简明分析化学手册[M]. 北京: 北京大学出版社, 1981: 10. |
