Prestressed concrete targets under high rate of loading

Prestressed concrete is highly being preferred as material for construction in the case of strategic and relevant structures such as, for instance, nuclear containments, armor deposits, shelters, bridges, and military bunkers. It is highly durable, fire and corrosion resistant, and non-porous. In order to study the influence of prestressing on the mechanics of deformation, energy absorption capacity, and failure modes of concrete targets, finite element simulations have been carried out using hard steel bullets and compared with the experiments carried out by the authors earlier. Prestressed concrete targets of plan size 450？mm？×？450？mm and thickness of 80？mm were impacted by 0.5-kg hard steel projectiles. The concrete was designed to obtain an unconfined compressive strength of 48？MPa. An initial stress of 10% magnitude of compressive strength was induced by 4-mm-diameter high-tensile-strength (1700？MPa) steel wires in prestressed concrete targets. A grid of 8-mm-diameter steel bars was inserted in the reinforced and prestressed concrete targets to enable the straight comparison between these concretes. The prestressing in concrete has been found to be effective in reducing the volume of scabbed material as well as the ballistic resistance of prestressed concrete targets. The ballistic limit of prestressed concrete with 10% induced stress was found to be, respectively, 14% higher than that of the plain concrete target and 10.2% higher than the reinforced concrete. Failure modes predicted through finite element simulations were found in agreement with that of the actual results