Influence of ply angle and length on buckling behavior of composite shells under hydrostatic pressure

This paper is devoted to the buckling problem of the composite cylindrical shell subjected to hydrostatic pressure. Both analytical and numerical methods are applied to investigate the buckling behavior. Based on the study of analytical formulas, it is found that the composite cylindrical shells with the same length-to-diameter ratio, diameter-to-thickness ratio, and type of layup have the same buckling pressure. Thus, a scale model experiment method is then proposed, which uses the scale model to replace the full-scale model in pressure test experiment to reduce the manufacturing cost of the test specimen. The feasibility of this method is verified by numerical calculation. The influences of ply orientation angle and length of shell on buckling shape and critical buckling pressure have been investigated numerically and demonstrated by several examples. Based on the study of the influence of shell length on critical buckling pressure, a modified finite element model, which can overcome the conservatism of optimization result due to the stress concentration caused by boundary conditions, is combined with the genetic algorithm to optimize the laminations for mass reduction