Failure analysis of conveyor belt samples under tensile load

This paper is dedicated to investigating the properties of smooth conveyor belts through a tensile loading test, with the aim of examining the behavior of the inner structure of the belt samples. When the belt is subjected to a long-term strain, the belt relaxation effect is observed and changes may occur to the inner structure of the belt. The tensile test at constant velocity determines the load strength limit of the strip samples. The experiment has also shown the phenomenon of relaxation of the samples after the load. Metro-tomographic analysis is used to observe the behavior of the internal structure of the belt sample after the load. The obtained results indicate the initial damage of the inner structure of the conveyor belt occurred at the value of 2157 N. Under this load, the maximum damage size was 4.8 mm. This confirms the suitability of the method for tracking changes in the internal structure