Buckling behaviour and design of complex

Thin-walled aluminium mullions are the vertical framing members of the fa？ade systems used in buildings. This article investigates the buckling behaviour of these complex-shaped aluminium mullions. For this purpose, the aluminium mullion sections were simplified into elements of varying thickness and modelled using CUFSM finite strip analysis programme. Elastic buckling analyses were performed with and without considering the availability of glass panel restraints for both negative and positive wind actions, and the results are presented in this article. The effect of providing return flanges to enable a good connectivity between the male and female mullions was also evaluated. The lateral restraints provided by glass panels were simulated using the spring stiffness option available in CUFSM, and the analyses were performed for spring stiffness values in the range of 0–1？N/mm/mm. The applicability of the buckling analysis results to the design of aluminium mullions was then evaluated using the direct strength method. For this purpose, the section moment capacities of mullions were determined from finite element analyses and compared with the direct strength method predictions using the CUFSM buckling analysis results. This comparison showed that direct strength method–based design can be adopted for the complex-shaped aluminium mullions provided their elastic buckling capacities are available. Overall, this study has provided good understanding of the buckling behaviour of mullion sections under both positive and negative wind actions and has proposed the use of direct strength method for the design of aluminium mullion sections