Effects of missing fasteners on the mechanical behavior of double

This paper presents a numerical investigation into the effects of missing fasteners on the mechanical characteristics of double-lap, multi-row composite bolted joints. A highly efficient explicit finite element model, which was validated effective and accurate by experiments, was developed and employed to conduct the virtual tests. Single-column and multi-column joints with various positions of missing fastener were considered. It is shown that the removal of fasteners can reduce the joint stiffness significantly, especially in joints with fewer columns or missing fasteners in the outside rows. The removal of fasteners can also cause considerable reductions in both the initial significant failure loads and ultimate loads of multi-column joints, while in single-column joints only the initial significant failure loads are influenced. Considering the load distribution, it is suggested that bolts in the same column as or in the adjacent column to the missing fastener experience a notable growth in load. Meanwhile, if a bolt bears more loads in the pristine joint, the larger changes in stiffness, ultimate strength, and load distribution may be obtained when it is lost