Preparation and Charaterization of Treated BIS [3

Hybridization of silanized CB/PCC filler reinforced NR/SBR blends was prepared on a two roll mill. The si-CB/PCC composites were vulcanized via a conventional sulphur system at 180°C. The primary aims of this research are to scrutinize the effects of different concentration of si treated hybrid CB/PCC fillers ranging from 2 wt. % to 10 wt. % on the NR/SBR blends properties towards the curing characteristics, viscosity and crosslink density. In this work, a positive correlation was found between silane content on the hybrid filler surface and NR/SBR blend properties. It was found that at 6% of Si 69 concentration (F4) provided improvement in crosslink density and mooney viscosity properties. Increment of crosslink density in the blends would increase the viscosity and it may be due to the network formation between the treated fillers and rubber molecules. Moreover, the incorporation of treated fillers accelerates the curing process due to the surface activation and hence leads to tightly contact between filler-rubber phases