|
- 2019
C/C热防护结构弹性波仿真分析方法及损伤对弹性波的影响
|
Abstract:
[1] | QIU L, LIU B, YUAN S F, et al. Impact imaging of aircraft composite structure based on a model-independent spatial-wavenumber filter[J]. Ultrasonics, 2016, 64(3):10-24. |
[2] | 赵丽滨, 秦田亮, 李嘉玺, 等. 复合材料结构三维有限元分析的材料参数[J]. 北京航空航天大学学报, 2010, 36(7):789-793.ZHAO L B, QIN T L, LI J X, et al. Material parameters in 3D finite element analysis of composite structure[J]. Journal of Beijing University of Aeronautics and Astronautics, 2010, 36(7):789-793(in Chinese). |
[3] | 张志民. 复合材料结构力学[M]. 北京:北京航空航天大学出版社, 1993:30-32.ZHANG Z M. The mechanics of composite structures[M]. Beijing:Beihang University Press, 1993:30-32(in Chinese). |
[4] | NADER G, SILVA E C N, ADAMOWSKI J C, et al. Effective damping value of piezoelectric transducer determined by experimental techniques and numerical analysis[J]. ABCM Symposium Series in Mechatronics, 2004, 1(1):271-279. |
[5] | YANG C, YE L, SU Z, et al. Some aspects of numerical simulation for Lamb wave propagation in composite laminates[J]. Composite Structures, 2006, 75(1-4):267-275. |
[6] | QIU L, YUAN S F, WANG Q, et al. Design and experiment of PZT network-based structural health monitoring scanning system[J]. Chinese Journal of Aeronautics, 2009, 22(5):505-512. |
[7] | CHEN J, YUAN S F, QIU L, et al. Research on a Lamb wave and particle filter-based on-line crack propagation prognosis method[J]. Sensors, 2016, 16(3):320-324. |
[8] | 鲍峤, 袁慎芳, 邱雷, 等. 基于阵列传感器的复合材料结构损伤MUSIC成像方法[J]. 复合材料学报, 2017, 34(2):456-462.BAO Q, YUAN S F, QIU L, et al. A damage imaging method based on MUSIC algorithm of linear sensor array for composite structure[J]. Acta Materiae Compositae Sinica, 2017, 34(2):456-462(in Chinese). |
[9] | DUCZEK S, GABBERT U. Anisotropic hierarchic finite elements for the simulation of piezoelectric smart structures[J]. Engineering Computations, 2013, 30(5):682-706. |
[10] | KUBRUSLY A C, BRAGA A M B, PIERRE V D W. Derivation of acoustoelastic Lamb wave dispersion curves in anisotropic plates at the initial and natural frames of reference[J]. Acoustical Society of America, 2016, 140(4):2412-2417. |
[11] | SHEN Y, CESNIK C E S. Hybrid local FEM/global LISA modeling of damped guided wave propagation in complex composite structures[J]. Smart Materials and Structures, 2016, 25(9):1-20. |
[12] | SZIROCZAK D, SMITH H. A review of design issues specific to hypersonic flight vehicles[J]. Progress in Aerospace Sciences, 2016, 84(2):1-28. |
[13] | YANG J, CHANG F K. Detection of bolt loosening in C-C composite thermal protection panels:II-Experimental verification[J]. Smart Materials and Structures, 2006, 15(2):591-595. |
[14] | TOBE R J, GRANDHI R V. Hypersonic vehicle thermal protection system model optimization and validation with vibration tests[J]. Dialogues in Cardiovascular Medicine, 2013, 28(1):208-213. |
[15] | KUNDU T, DAS S, JATA K V. Health monitoring of a thermal protection system using lamb waves[J]. Structural Health Monitoring, 2008, 8(1):29-45. |
[16] | YUAN S F, REN Y Q, QIU L, et al. A multi-response-based wireless impact monitoring network for aircraft composite structures[J]. IEEE Transactions on Industrial Electronics, 2016, 63(12):7712-7722. |
[17] | 王利彬. C/C复合材料高温高速撞击实验与损伤性能评价[D]. 哈尔滨:哈尔滨工业大学, 2015.WANG L B. C/C composite material high-temperature & high-speed impact experiment and damage performance evaluation[D]. Harbin:Harbin Institute of Technology, 2015(in Chinese). |
[18] | 钟永腾, 袁慎芳. 基于MUSIC算法的复合材料近场冲击源定位[J]. 复合材料学报, 2013, 30(2):189-194.ZHONG Y T, YUAN S F. MUSIC algorithm based impact localization in the near-field of composite structure[J]. Acta Materiae Compositae Sinica, 2013, 30(2):189-194(in Chinese). |
[19] | GRESIL M, GIURGIUTIU V. Prediction of attenuated guided waves propagation in carbon fiber composites using Rayleigh damping model[J]. Journal of Intelligent Material Systems and Structures, 2015, 26(16):2151-2169. |
[20] | OSTACHOWICZ W, RADZIENSKI M, KUDELA P. Structural health monitoring[M]//Impact induced delamination detection by application of full wave field analysis[s.n.], 2017. |
[21] | PARIDA S K, PRADHAN A K. 3D finite element analysis of stress distributions and strain energy release rates for adhesive bonded flat composite lap shear joints having pre-existing delaminations[J]. Mechanical Science & Technology, 2014, 28(2):481-488. |
[22] | GAO T, KINLOCH A J, BLACKMAN B R K, et al. A study of the impact properties of adhesively-bonded aluminum alloy based on impact velocity[J]. Journal of Mechanical Science & Technology, 2015, 29(2):493-499. |
[23] | TANG Y, ZHOU Z, PAN S, et al. Mechanical property and failure mechanism of 3D carbon-carbon braided composites bolted joints under unidirectional tensile loading[J]. Materials & Design, 2015, 65(65):243-253. |