3D Printed Temporary Veneer Restoring Autotransplanted Teeth in Children: Design and Concept Validation Ex Vivo

(1) Background: Three-dimensional printing is progressing rapidly and is applied in many fields of dentistry. Tooth autotransplantation offers a viable biological approach to tooth replacement in children and adolescents. Restoring or reshaping the transplanted tooth to the anterior maxilla should be done as soon as possible for psychological and aesthetic reasons. However, to avoid interfering with the natural healing process, reshaping of transplanted teeth is usually delayed three to four months after transplantation. This delay creates a need for simple indirect temporary aesthetic restoration for autotransplanted teeth. The aim of this study was to develop and validate a digital solution for temporary restoration of autotransplanted teeth using 3D printing. (2) Methods: Four dry human skulls and four dry human mandibles were scanned using cone beam computed tomography to create 3D models for 15 premolars. Digital impression of the maxillary arch of one of the skulls was captured by intra oral scanner. The digital work flow for the design and fabrication of temporary veneers is presented. The seating and adaptation of the 3D printed veneers were evaluated using stereomicroscopy and micro-computed tomography. (3) Results: Evaluation of the veneer seating using stereomicroscopy showed that the mean marginal gap at all of the sides was below the cut-off value of 200 μm. The overall mean marginal gap was 99.9 ± 50.7 μm (median: 87.8 (IQR 64.2–133 μm)). The internal adaptation evaluation using micro-computed tomography showed an average median gap thickness of 152.5 ± 47.7 (IQR 129–149.3 μm). (4) Conclusions: The present concept of using temporary veneers that are designed and fabricated with CAD/CAM (computer-aided design/computer-aided manufacturing) technology using a DLP (digital light processing) printer may present a viable treatment option for restoration of autotransplanted teeth. View Full-Tex