Textile Wastewater Treatment for Water Reuse: A Case Study

The reduced natural waters and the large amount of wastewater produced by textile industry necessitate an effective water reuse treatment. In this study, a combined two-stage water reuse treatment was established to enhance the quality and recovery rate of reused water. The primary treatment incorporated a flocculation and sedimentation system, two sand filtration units, an ozonation unit, an ultrafiltration (UF) system, and a reverse osmosis (RO) system. The second treatment included an ozonation unit, a sand filtration unit, and UF and RO systems. The color removal rate increased with the increasing ozone dosage, and the relational expression between the ozone dosage and color removal rate was fitted. Ozonation greatly reduced the color by 92.59 and 97.27 times during the primary and second ozonation stages, respectively. RO had the highest removal rate. The combined processes showed good performance in water reuse treatment. The treated, reused water satisfied the reuse standard and surpassed the drinking water standard rates for chemical oxygen consumption (COD cr), color, NH 3-N, hardness, Cl ？, SO 4 2？, turbidity, Fe 3+, and Cu 2+. The operating cost of reuse water treatment was approximately 0.44 USD·m ？3. View Full-Tex