多粒径TiB2颗粒增强铜基复合材料的制备与载流摩擦磨损性能
Preparation and electrical wear characteristics of copper matrix composites reinforced with mixing sized TiB2 particles

DOI: 10.13801/j.cnki.fhclxb.20190226.001

Keywords: TiB2/Cu复合材料,多粒径颗粒,协同作用,载流摩擦,磨损率
TiB2/Cu composites,mixing sized particles,synergistic effect,wear with electric current,friction coefficient

Full-Text   Cite this paper   Add to My Lib

Abstract:

References

[1]	刘瑞蕊, 周海涛, 周啸, 等. 高强高导铜合金的研究现状及发展趋势[J]. 材料导报, 2012, 26(10):100-105.LIU Ruirui, ZHOU Haitao, ZHOU Xiao, et al. Present situation and future prospect of high-strength and high-conductivity Cu alloy[J]. Materials Review, 2012, 26(10):100-105(in Chinese).
[2]	ZHANG Xiaohui, ZHANG Yi, TIAN Baohong, et al. Arc erosion behavior of the Al2O3-Cu/(W, Cr) electrical contacts[J]. Composites Part B:Engineering, 2019, 160:110-118.
[3]	张新杰, 崔洪芝, 王明亮, 等. 放电等离子烧结Ni/TiB2-TiC复合材料微观组织及磨损性能[J]. 复合材料学报, 2018, 35(1):158-167.ZHANG Xinjie, CUI Hongzhi, WANG Mingliang, et al. Microstructure and wear properties of Ni/TiB2-TiC compo-sites prepared by spark plasma sintering[J]. Acta Materiae Compositae Sinica, 2018, 35(1):158-167(in Chinese).
[4]	PARASHKEVOVA L, BONTCHEVA N, BABAKOV V. Modelling of size effects on strengthening of multiphase Al based composites[J]. Computational Materials Science, 2010, 50(2):527-537.
[5]	BINDUMADHAVAN P N, HENG K, PRABHAKAR O. Dual partical size (DPS) composites effect on wear and mechanical properties of particulate metal matrix composites[J]. Wear, 2001, 248(1):112-120.
[6]	MALEQUE M A, KARIM M R. Tribological behavior of dual and triple particle size SiC reinforced Al MMCs:A comparative study[J]. Industrial Lubrication and Tribology, 2008, 60(4):189-194.
[7]	李金山, 桑可正, 吕振林, 等. 颗粒级配SiC-Si复相陶瓷的干摩擦磨损特性[J]. 摩擦学学报, 2002, 22(4):306-309.LI Jinshan, SANG Kezheng, LV Zhenlin, et al. Friction and wear behavior of SiC-Si composite with matching size of SiC particles under dry sliding[J]. Tribology, 2002, 22(4):306-309(in Chinese).
[8]	MISHNAEVSKY J L. DERRIENK, BSPTISTE D. Effect of microstructure of particle reinforced composites on the damage evolution:Probabilistic and numerical analysis[J]. Composites Science and Technology, 2004, 64(12):1805-1818.
[9]	侯敬春, 胡更开. 金属基复合材料损伤细观力学分析[J]. 复合材料学报, 1996, 13(4):117-122.HOU Jingchun, HU Gengkai. Damage micromechanical analysis of metal matrix composites[J]. Acta Materiae Compositae Sinica, 1996, 13(4):117-122(in Chinese).
[10]	霍生伟, 李长生, 唐华, 等. NbSe2/Cu新型自润滑复合材料制备及其摩擦学性能[J]. 复合材料学报, 2013, 30(4):121-127.HUO Shengwei, LI Changsheng, TANG Hua, et al. Preparation and tribological properties of copper matrix solid self-lubricant composites reinforced with NbSe2 sheets[J]. Acta Materiae Compositae Sinica, 2013, 30(4):121-127(in Chinese).
[11]	周文艳, 冉丽萍, 彭可, 等. Mo2C改性C/C-Cu复合材料的组织及载流摩擦磨损性能[J]. 复合材料学报, 2016, 33(9):2074-2080.ZHOU Wenyan, RAN Liping, PENG Ke, et al. Structure and tribological property with electric current of Mo2C modified C/C-Cu composites[J]. Acta Materiae Compositae Sinica, 2016, 33(9):2074-2080(in Chinese).
[12]	TJONG S C, LAU K C. Abrasive wear behavior of TiB2 particle-reinforced copper matrix composites[J]. Materials Science and Engineering, 2000, A282:183-186.
[13]	GUO Xiuhua, SONG Kexing, LIANG Shuhua, et al. Effect of Al2O3 particle size on electrical wear performance of Al2O3/Cu composites[J]. Tribology Transactions 2016, 59(1):170-177.
[14]	AMIT Siddharth Sharma, KRISHANU Biswas, BASU Bikramjit. Microstructure hardness fretting wear resistance correlation in ultrafine grained Cu-TiB2-Pb composites[J]. Wear, 2014, 319(1-2):160-171.
[15]	刘向兵, 贾成厂, 王富祥, 等. 热压与放电等离子体烧结两种工艺制备A12O3/Cu复合材料[J]. 复合材料学报, 2007, 24(4):76-81.LIU Xiangbing, JIA Chengchang, WANG Fuxiang, et al. A12O3/Cu composite fabricated by hot pressing and spark plasma sintering[J]. Acta Materiae Compositae Sinica, 2007, 24(4):76-81(in Chinese).
[16]	侯南, 崔洪芝, 宋晓杰, 等. Ti2AlC-TiB2对TiAl基复合材料组织及力学性能的影响[J]. 复合材料学报, 2017, 34(10):2279-2287.HOU Nan, CUI Hongzhi, SONG Xiaojie, et al. Effects of Ti2AlC-TiB2 on the microstructure and mechanical properties of TiAl matrix composites[J]. Acta Materiae Compositae Sinica, 2017, 34(10):2279-2287(in Chinese).
[17]	DINAHARANA I, SARAVANAKUMAR S, KALAISELVAN K, et al. Microstructure and sliding wear characterization of Cu/TiB2 copper matrix composites fabricated via friction stir processing[J]. Journal of Asian Ceramic Societies, 2017, 5(3):295-303.
[18]	张胜利, 宋克兴, 国秀花, 等. TiB2颗粒混杂对TiB2/Cu复合材料微观组织和性能的影响[J]. 材料热处理学报, 2018, 39(8):7-13.ZHANG Shengli, SONG Kexing, GUO Xiuhua, et al. Effect of TiB2 particles mixing on microstructure and properties of TiB2/Cu composites[J]. Transactions of Materials and Heat Treatment, 2018, 39(8):7-13(in Chinese).
[19]	K-H哈比希. 材料的磨损与硬度[M]. 严立, 译, 北京:机械工业出版社, 1985.KARL-HEINZ. Verschlei und harte von werkstoffen[M]. YAN L, translate, Beijing:Machinery Industry Press, 1985(in Chinese).
[20]	HSU S M, NAGARAJAN V S, LIU H. Microstuctural design of cerancs for optimum wear resistance[C]. Procceding of the International Symposium on Advanced Ceramics for Structural and Tribological Applications, British Columbia, 1995:7-21.

Full-Text