碳纤维/树脂复合材料多钉连接钉载系数测试方法
Testing method of bolt load distribution in carbon fiber/resin composite multi-bolt joints

DOI: 10.13801/j.cnki.fhclxb.20190514.001

Keywords: 复合材料,钉载系数,相对测量不确定度,应变片方法,钉载矢量传感器方法
composites,bolt load distribution,relative uncertainty,strain gauge method,instrumented bolt method

Full-Text   Cite this paper   Add to My Lib

Abstract:

References

[1]	QIN T L, ZHAO L B, ZHANG J Y. Fastener effects on mechanical behaviors of double-lap composite joints[J]. Composite Structures, 2013, 100:413-423.
[2]	赵丽滨, 秦田亮, 山美娟, 等. 基于渐进损伤分析的复合材料螺栓连接强度包线法研究[J]. 复合材料学报, 2015, 32(3):823-830.ZHAO L B, QIN T L, SHAN M J, et al. Progressive damage analysis based strength envelope method research for composite bolted joints[J]. Acta Compositae Materiae Sinica, 2015, 32(3):823-830(in Chinese).
[3]	李念, 任飞翔, 陈普会, 等. GBJM方法的改进及其在含钉群复合材料结构钉载分配和承载能力分析中的应用[J]. 复合材料学报, 2015, 32(1):176-181.LI N, REN F X, CHEN P H, et al. An improved GBJM method and its application in bolt load distribution and load capacity analysis of composite structures with bolt group[J]. Acta Compositae Materiae Sinica, 2015, 32(1):176-181(in Chinese).
[4]	刘向东, 李亚智, 舒怀, 等. 多钉连接钉载分配特性研究方法[J]. 复合材料学报, 2013, 30(1):210-217.LIU X D, LI Y Z, SHU H, et al. Experimental and numerical study on the pin-load distribution of multiple-bolted joints[J]. Acta Compositae Materiae Sinica, 2013, 30(1):210-217(in Chinese).
[5]	YU D Z, CHEN Y L, GAO Y, et al. Load transfer analysis of cracked bolted joints[J]. Advanced Materials Research, 2010, 118-120:147-150.
[6]	ASCIONE F. A preliminary numerical and experimental investigation on the shear stress distribution on multi-row bolted FRP joints[J]. Mechanics Research Communications, 2010, 37(2):164-168.
[7]	PALMBERG B. Instrumented bolts for measurements of their shear load transfer in single and double shear joints[R]. Technical Report FFA TN 1991-09, The Aeronautical Research Institute of Sweden, 1991.
[8]	LIU F R, ZHANG J Y, ZHAO L B, et al. An analytical joint stiffness model for load transfer analysis in highly torqued multi-bolt composite joints with clearances[J]. Composite Structures, 2015, 131:625-636.
[9]	LI H S, GU R J, ZHAO X. Global sensitivity analysis of load distribution and displacement in multi-bolt composite joints[J]. Composites Part B:Engineering, 2017, 116:200-210.
[10]	LEKOU D J, ASSIMAKOPOULOU T T, PHILIPPIDIS T P. Estimation of the uncertainty in measurement of composite material mechanical properties during static testing[J]. Strain, 2011, 47(5):430-438.
[11]	刘智敏. 不确定度原理[M]. 北京:中国计量出版社, 1993.LIU Z M. Principle of uncertainty in measurement[M]. Beijing:China Metrology Publishing House, 1993(in Chinese).
[12]	戴福隆, 沈观林, 谢惠民. 实验力学[M]. 北京:清华大学出版社, 2010.DAI F L, SHEN G L, XIE H M. Experimental mechanics[M]. Beijing:Tsinghua University Press, 2010(in Chinese).
[13]	高晓丁, 胥光申, 王锦. 电阻应变片贴装方位偏差对测量结果的影响[J]. 西安石油学院学报(自然科学版), 2001:41-43.GAO X D, XU G S, WANG J. Effect of orientation deviation of resistance strain gauge mounting on measurement results[J]. Journal of Xi'an Petroleum Institute(Natural Science Edition), 2001:41-43(in Chinese).
[14]	钱善华, 葛世荣, 潘宁. 扩展不确定度中包含因子的确定方法[J]. 计量与测试技术, 2005, 33(2):33-34.QIAN S H, GE S R, PAN N. A method for determining inclusion factor in extended uncertainty[J]. Measurement and Testing Technology, 2005, 33(2):33-34(in Chinese).
[15]	李望南, 蔡洪能, 李超, 等. 基于微观力学失效理论的复合材料单钉螺栓连接结构拉伸行为预测[J]. 复合材料学报, 2013(s1):240-246.LI W N, CAI H N, LI C, et al. Static tensile behavior of the single-lap bolted composite joints based on micro-mechanics of failure[J]. Acta Compositae Materiae Sinica, 2013(s1):240-246(in Chinese).
[16]	寇剑锋, 徐绯, 张笑宇, 等. 考虑装配间隙的双搭接螺栓连接剪切刚度的解析求解方法[J]. 复合材料学报, 2018, 35(6):1510-1517.KOU J F, XU F, ZHANG X Y, et al. Analytical solution of shear stiffness for double-lap bolted joints with clearances[J]. Acta Compositae Materiae Sinica, 2018, 35(6):1510-1517(in Chinese).
[17]	LECOMTE J, BOIS C, WARGNIER H, et al. An analytical model for the prediction of load distribution in multi-bolt composite joints including hole-location errors[J]. Composite Structures, 2014, 117(1):354-361.
[18]	LIU F R, LU X H, ZHAO L B, et al. Investigation of bolt load redistribution and its effect on failure prediction in double-lap, multi-bolt composite joints[J]. Composite Structures, 2018, 202:397-405.
[19]	XIANG J, ZHAO S, LI D, et al. An improved spring method for calculating the load distribution in multi-bolt composite joints[J]. Composites Part B:Engineering, 2017, 117:1-8.
[20]	CHANDRASHEKHAR M, GANGULI R. Damage assessment of composite plate structures with material and measurement uncertainty[J]. Mechanical Systems & Signal Processing, 2016, 75:75-93.
[21]	ASTM. Standard guide for installing bonded resistance strain gages:ASTM E 1237-93[S]. Philadelphia:ASTM, 2014.
[22]	叶德培. 测量不确定度理解评定与应用[M]. 北京:中国计量出版社, 2007.YE D P. Comprehension evaluation and application on uncertainty of measurement[M]. Beijing:China Metrology Publishing House, 2007(in Chinese).
[23]	王承忠. 测量不确定度的验证方法及其应用实例[J]. 理化检验(物理分册), 2008:550-553.WANG C Z. Verification method of measurement uncertainty and its application examples[J]. Physical and Chemical Examination (Physical fascicle), 2008:550-553(in Chinese).
[24]	MCCARTHY M. BOJCAS:Bolted joints in composite aircraft structures[J]. Air & Space Europe, 2001, 3(3):139-142.
[25]	MCCARTHY M A, MCCARTHY C T, PADHI G S. A simple method for determining the effects of bolt-hole clearance on load distribution in single-column multi-bolt composite joints[J]. Composite Structures, 2006, 73(1):78-87.
[26]	赵丽滨, 山美娟, 彭雷, 等. 制造公差对复合材料螺栓连接结构强度分散性的影响[J]. 复合材料学报, 2015, 32(4):1092-1098.ZHAO L B, SHAN M J, PENG L, et al. Effect of manufacturing tolerance on strength scatter of composite bolted joint structure[J]. Acta Composite Materials Sinica, 2015, 32(4):1092-1098(in Chinese).
[27]	LAWLOR V P, MCCARTHY M A, STANLEY W F. An experimental study of bolt-hole clearance effects in double-lap, multi-bolt composite joints[J]. Composite Structures, 2005, 71(2):176-190.
[28]	STARIKOV R, SCH？N J. Quasi-static behaviour of composite joints with protruding-head bolts[J]. Composite Structures, 2001, 51(4):411-425.
[29]	张建宇, 刘丰睿, 山美娟, 等. 复合材料机械连接钉载矢量传感器[J]. 复合材料学报, 2015, 32(5):1420-1427.ZHANG J Y, LIU F R, SHAN M J, et al. Instrumented bolt for load vector measurement of composite multi-bolt joints[J]. Acta Compositae Materiae Sinica, 2015, 32(5):1420-1427(in Chinese).

Full-Text