雾化喷射压力对氧化石墨烯-SiO2/天然橡胶复合材料性能的影响
Effect of atomizing spray pressure on performance of graphene oxide-SiO2/ natural rubber composite

DOI: 10.13801/j.cnki.fhclxb.20190122.003

Keywords: 湿法混炼,雾化溅射干燥法,喷射压力,氧化石墨烯(GO),复合材料
wet mixing,spray sputtering drying method,spray pressure,graphene oxide(GO),composites

Full-Text   Cite this paper   Add to My Lib

Abstract:

References

[1]	MANAS Z I, FEKE D L. Observation of carbon black agglomerate dispersion in simple shear flows[J]. Polymer Engineering and Science, 1990, 30(12):701-706.
[2]	WANG M J, WANG T, SHELL J, et al. NR/carbon black masterbatch produced with continuous liquid phase mixing[J]. Kautsch Gummi Kunsts, 2002, 55(7):388-396.
[3]	中山敦, 泉池正明, 西浦史晃. 橡胶湿法母炼胶的制造方法、橡胶组合物及轮胎:中国, CN 102356120A[P]. 2012-02-15.NAKAYAMA A, IZUMIIKE M, NISHIURA F. Method for manufacturing rubber wet master batch, rubber composition and tire:China, CN 102356120A[P]. 2012-02-15(in Chinese).
[4]	CAMILA A R, FABIO C B, TELMA R D, et al. Natural rubber-clay nanocomposites:Mechanical and structural properties[J]. Polymer, 2010, 51(16):3644-3652.
[5]	全国橡胶与橡胶制品标准化技术委员会. 硫化橡胶或热塑性橡胶拉伸应力应变性能的测定:GB/T 528-1998[S]. 北京:中国标准出版社, 1998.National Technical Committee on Rubber and Products of Standardization Administer of China. Rubber, vulcanized or thermoplastic:Determination of tensile stress-strain properties:GB/T 528-1998[S]. Beijing:China Standards Press, 1998(in Chinese).
[6]	全国橡胶与橡胶制品标准化技术委员会. 硫化橡胶耐磨性能的测定(旋转辊筒式磨耗机法):GB/T 9867-1988[S]. 北京:中国标准出版社, 1988. National Technical Committee on Rubber and Products of Standardization Administer of China. Rubber determination of abrasion resistance using a rotating cylindrical drum device:GB/T 9867-1988[S]. Beijing:China Standards Press, 1988(in Chinese).
[7]	KIM S G, LEE S H. Effect of crosslink structures on the fatigue carck growth behavior of NR vulcanizates with various aging conditions[J]. Rubber Chemistry and Technology, 1994, 67(4):649-661.
[8]	MANAS-ZLOCZOWER I, NIR A, TADMOR Z. Dispersive mixing in internal mixers:A theoretical model based on agglomerate rupture[J]. Rubber Chemistry and Technology, 1982, 55(5):1250-1285.
[9]	SHIGA S, FURUTA M. Processability of EPR in an internal mixer (11) morphological changes of carbon black agglomerates during mixing[J]. Rubber Chemistry and Technology, 1985, 58(1):1-20.
[10]	MABRY M A, RUMPF F H, PODOBNIK I Z, et al. Elastomer composites method and apparatus:USA, USP06048923A[P]. 2000-04-11.
[11]	STANKOVICH S, DIKIN D A, DOMMETT G H, et al. Graphene-based composite materials[J]. Nature, 2006, 442:282-286.
[12]	汪传生, 刘洁, 宋凤鹏, 等. 雾化溅射干燥法制备氧化石墨烯-SiO2/天然橡胶复合材料[J]. 复合材料学报, 2018, 35(8):2116-2123.WANG C S, LIU J, SONG F P, et al. Preparation of graphene oxide-SiO2/natural rubber composites by spay sputtering drying method[J]. Acta Materiea Compositae Sinica, 2018, 35(8):2116-2123(in Chinese).
[13]	全国橡胶与橡胶制品标准技术委员会. 橡胶用无转子硫化仪测定特性:GB/T 16584-1996[S]. 北京:中国标准出版社, 1996.National Technical Committee on Rubber and Products of Standardization Administer of China. Rubber-measurement of vulcanization characteristics with rotorless curemeters:GB/T 16584-1996[S]. Beijing:China Standards Press, 1996(in Chinese).
[14]	PAYNE A R, WHITTAKER R E. Low strain dynamic properties of filled rubber[J]. Rubber Chemistry and Technology, 1971, 44(2):440-478.
[15]	WANG M J. Effect of polymer-filler and filler-filler interactions on dynamic properties of filled vulcanizates[J]. Rubber Chemistry and Technology, 1998, 71(3):520-589.
[16]	ZHANG L, WANG Y, WANG Y, et al. Morphology and mechanical properties of clay/styrene-butadiene rubber nanocomposites[J]. Journal of Applied Polymer Science, 2000, 78(11):1873-1878.
[17]	JAIPHUEPHAE T, POOCHINDA K, POOMPRADUB S, et al. Yield optimization of spray-dried natural rubber and properties of its silica-filled composites[J]. Advances in Polymer Technology, 2014, 33(4):214-223.
[18]	LILIANE B. Multiwall carbon nanotube elastomeric composites:A Review[J]. Polymer, 2007, 48(17):4907-4920.
[19]	PRADHAN B, SRIVASTAVA S. Synergistic effect of three-dimensional multiwalled carbon nanotube-graphene nanofiller in enhancing the mechanical and thermal properties of high-performance silicone rubber[J]. Polymer International, 2014, 63(7):1219-1228.
[20]	YAN N, BUONOCORE G, LAVORGNA M, et al. The role of reduced graphene oxide on chemical, mechanical and barrier properties of natural rubber composites[J]. Composites Science and Technology, 2014, 102:74-81.
[21]	全国橡胶与橡胶制品标准化技术委员会. 橡胶袖珍硬度计压入硬度试验方法:GB/T 531-1999[S]. 北京:中国标准出版社, 1999. National Technical Committee on Rubber and Products of Standardization Administer of China. Rubber determination of indentation hardness by means of pocket hardness meter:GB/T 531-1999[S]. Beijing:China Standards Press, 1999(in Chinese).
[22]	PAYNE A R. The dynamic properties of carbon-black natural rubber vulcanizates:Part I[J]. Journal of Applied Polymer Science, 1962, 6(19):57-63.
[23]	王作龄. 橡胶的交联密度与测试方法[J]. 世界橡胶工业, 1998(4):41-46.WANG Z L. Rubber crosslink density and its test method[J]. World Rubbre Industry, 1998(4):41-46(in Chinese).

Full-Text