全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...
-  2019 

碳纤维-尼龙6混编织物复合材料的制备及性能
Preparation and properties of carbon fiber-nylon 6 mixed braid fabric composites

DOI: 10.13801/j.cnki.fhclxb.20190123.002

Keywords: 碳纤维,尼龙6,混编织物,表面处理,热压成型,复合材料
carbon fiber
,nylon 6,mixed braid fabric,surface treatment,hot press forming,composites

Full-Text   Cite this paper   Add to My Lib

Abstract:

References

[1]  吴玉霞. 碳纤维织物增强尼龙6复合材料成型工艺及性能研究[D]. 上海:东华大学, 2015.WU Y X. Molding process and properties of carbon fiber reinforced polyamaid 6 composite[D]. Shanghai:Donghua University, 2015(in Chinese).
[2]  中华人民共和国国家质量监督检验总局. 纤维增强塑料:弯曲性能试验方法:GB/T 1449-2005[S]. 北京:中国标准出版社, 2005.General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China. Fiber-reinforced plastic composites:Determination of flexural properties:GB/T 1449-2005[S]. Beijing:China Standards Press, 2005(in Chinese).
[3]  井敏, 谭婷婷, 王成国, 等. PAN基碳纤维的微观结构与力学性能相关性分析[J]. 航空材料学报, 2013, 33(1):78-85.JING M, TAN T T, WANG C G, et al. Correlation analysis between microstructure and mechanical properties of PAN-based carbon fibers[J]. Journal of Aeronautical Materials, 2013, 33(1):78-85(in Chinese).
[4]  许恩惠. PA6受限结晶行为及其对复合材料性能的影响研究[D]. 贵州:贵州大学, 2016.XU E H. Study on the restricted crystallization behavior of PA6 and its effect on the properties of composites[D]. Guizhou:Guizhou University, 2016(in Chinese).
[5]  BOSE S, BHATTCHARYYA A R, KODGIRE P V, et al. Fractionated crystallization in PA6/ABS blends:Influence of a reactive compatibilizer and multiwall carbon nanotubes[J]. Polymer, 2007, 48(1):356-362.
[6]  付豪, 陈俊林, 王凯, 等. 热处理对碳纤维/聚酰胺6复合材料界面结晶及力学性能的影响[J]. 复合材料学报, 2018, 35(4):815-822.FU H, CHEN J L, WANG K, et al. Effect of heat treatment on interfacial crystallization and mechanical properties of carbon fiber/polyamide 6 composites[J]. Acta Materiae Compositae Sinica, 2018, 35(4):815-822(in Chinese).
[7]  LIANG J, XU Y, WEI Z, et al. Mechanical properties, crystallization and melting behaviors of carbon fiber-reinforced PA6 composites[J]. Journal of Thermal Analysis & Calorimetry, 2014, 115(1):209-218.
[8]  GENDRE L, NJUGUNA J, ABHYANKAR H, et al. Mechanical and impact performance of three-phase polyamide 6 nanocomposites[J]. Materials & Design, 2015, 66:486-491.
[9]  刘焕章. 碳纤维制备过程中元素含量变化与结构性能相关性研究[D]. 济南:山东大学, 2007.LIU H Z. Correlation between element content change and structural properties during carbon fiber preparation[D]. Jinan:Shandong University, 2007(in Chinese).
[10]  姚明, 刘志雷, 周建萍, 等. 碳纤维表面接枝纳米SiO2的工艺研究[J]. 表面技术, 2013, 42(3):70-74.YAO M, LIU Z L, ZHOU J P, et al. Process research of nano-silica grafting onto carbon fiber surface[J]. Surface Technology, 2013, 42(3):70-74(in Chinese).
[11]  ZHOU G, LIU Y, HE L, et al. Microstructure difference between core and skin of T700 carbon fibers in heat-treated carbon/carbon composites[J]. Carbon, 2011, 49(9):2883-2892.
[12]  钱鑫, 皇静, 张永刚, 等. 国外PAN基碳纤维的研究现状及发展趋势[J]. 高科技纤维与应用, 2011, 36(3):34-38.QIAN X, HUANG J, ZHANG Y G, et al. Present research status and development trend of foreign PAN-based carbon fibers[J]. Hi-Tech Fiber & Application, 2011, 36(3):34-38(in Chinese).
[13]  王茂章. 碳纤维及其复合材料[J]. 新型炭材料, 1989(4):5-11.WANG M Z. Carbon fiber and its composite materials[J]. New Carbon Materials, 1989(4):5-11(in Chinese).
[14]  KOBAYASHI D, HSIEH Y T, TAKAHARA A. Interphase structure of carbon fiber reinforced polyamide 6 revealed by microbeam X-ray diffraction with synchrotron radiation[J]. Polymer, 2016, 89:154-158.
[15]  李超. 水性环氧树脂碳纤维上浆剂[D]. 上海:东华大学, 2011.LI C. Waterborne epoxy resin carbon fiber sizing agent[D]. Shanghai:Donghua University, 2011(in Chinese).
[16]  马刚峰, 徐泽夕, 常青, 等. 碳纤维上浆剂的开发和研究进展[J]. 现代纺织技术, 2012(5):61-64.MA G F, XU Z X, CHANG Q, et al. Development and research progress of carbon fiber sizing agent[J]. Modern Textile Technology, 2012(5):61-64(in Chinese).
[17]  BONDY M, PINTER P, ALTENHOF W. Experimental characterization and modelling of the elastic properties of direct compounded compression molded carbon fibre/polyamide 6 long fibre thermoplastic[J]. Materials & Design, 2017, 122:184-196.
[18]  ZHANG D, LIU Y, LIN Y, et al. Thermoplastics reinforced with self-welded short carbon fibers:Nanoparticle-promoted structural evolution[J]. ACS Applied Materials & Interfaces, 2016, 8(29):19075-19083.
[19]  FANG K, YANG J, WU S, et al. Comparison between the preparation, structure and mechanical properties of long fiber reinforced thermoplastics and short fiber reinforced thermoplastic[J]. Engineering Sciences, 2012, 10(6):83-88.
[20]  中华人民共和国国家质量监督检验总局. 纤维增强塑料:拉伸性能试验方法:GB/T 1447-2005[S]. 北京:中国标准出版社, 2005.General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China. Fiber-reinforced plastic composites:Determination of tensile properties:GB/T 1447-2005[S]. Beijing:China Standards Press, 2005(in Chinese).
[21]  中华人民共和国国家质量监督检验总局. 塑料:悬臂梁冲击强度的测定:GB/T 1843-2008[S]. 北京:中国标准出版社, 2008.General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China. Plastics:Determination of izod impact strength:GB/T 1843-2008[S]. Beijing:China Standards Press, 2008(in Chinese).
[22]  赖鹏辉, 尹洪峰, 张静, 等. 纳米Al2O3-碳纤维多尺度增强聚酰胺基复合材料的制备及力学性能[J]. 复合材料学报, 2018, 35(3):493-500. LAI P H, YIN H F, ZHANG J, et al. Preparation and mechanical properties of nano Al2O3-carbon fiber multi-scale reinforced polyamide composites[J]. Acta Materiae Compositae Sinica, 2018, 35(3):493-500(in Chinese).

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133