形状记忆合金-玻璃纤维/环氧树脂复合材料在振动边界条件下的低速冲击数值模拟
Numerical analysis of the low-velocity impact resistance of shape memory alloy-glass fiber/epoxy resin composites under vibrating boundary condition

DOI: 10.13801/j.cnki.fhclxb.20181119.006

Keywords: 形状记忆合金(SMA),冲击性能,振动边界条件,数值模拟,损伤
shape memory alloy(SMA),impact resistance,vibrating boundary condition,numerical analysis,failure

Full-Text   Cite this paper   Add to My Lib

Abstract:

References

[1]	MALLICK P K. Fiber-reinforced composites:Materials, manufacturing, and design[M]. 3rd ed. Florida:CRC Press, 1993.
[2]	MORTAZAVIAN S, FATEMI A. Effects of fiber orientation and anisotropy on tensile strength and elastic modulus of short fiber reinforced polymer composites[J]. Composites Part B:Engineering, 2015, 72:116-129.
[3]	MORTAZAVIAN S, FATEMI A. Fatigue behavior and modeling of short fiber reinforced polymer composites:A literature review[J]. International Journl of Fatigue, 2015, 70(1):297-321.
[4]	THOMASON J L. The influence of fiber properties of the performance of glass-fibre-reinforced polyamide 6,6[J]. Composites Science Technology, 1999, 59:2315-2328.
[5]	CHO H K, RHEE J. Nonlinear finite element analysis of shape memory alloy (SMA) wire reinforced hybrid laminate composite shells[J]. International Journal Non-Linear Mechanics, 2012, 47(6):672-678.
[6]	BRINSON L. One-dimensional constitutive behavior of shape memory alloys:Thermomechanical derivation with non-constant material functions and redefined martensite internal variable[J]. Journal Intelligent Material Systems and Structures, 1993, 4(2):229-242.
[7]	SUN M, WANG Z, YANG B, et al. Experimental investigation of GF/epoxy laminates with different SMAs positions subjected to low-velocity impact[J]. Composite Structures, 2017, 171:170-184.
[8]	KHALILI S M R, BOTSHEKANAN D M, CARRERA E, et al. Non-linear dynamic analysis of a sandwich beam with pseudoelastic SMA hybrid composite faces based on higher order finite element theory[J]. Composite Structures, 2013, 96:243-255.
[9]	CHAWLA N, SIDHU R S, GANESH V V. Three-dimensional visualization and microstructure-based modeling of deformation in particle-reinforced composites[J]. Acta Materialia, 2006, 54(6):1541-1548.
[10]	SHARIYAT M. A double-superposition global-local theory for vibration and dynamic buckling analyses of viscoelastic composite/sandwich plates:A complex modulus approach[J]. Archive Applied Mechanics, 2011, 81:1253-1268.
[11]	SHARIYAT M, HOSSEINI S H. Eccentric impact analysis of pre-stressed composite sandwich plates with viscoelastic cores:A novel global-local theory and a refined contact law[J]. Composite Structures, 2014, 117:333-345.
[12]	SHARIYAT M, MORADI M, SAMAEE S. Enhanced model for nonlinear dynamic analysis of rectangular composite plates with embedded SMA wires, considering the instantaneous local phase changes[J]. Composite Structures, 2014, 109:106-118.
[13]	LIU C J, TODD M D, ZHENG Z L, et al. A nondestructive method for the pretension detection in membrane structures based on nonlinear vibration response to impact[J]. Structures Health Monitoring, 2018, 17(1):67-79.
[14]	ZHAO L, YANG Y. An impact-based broadband aeroelastic energy harvester for concurrent wind and base vibration energy harvesting[J]. Applied Energy, 2018, 212:233-243.
[15]	HASHIN Z. Failure criteria for unidirectional composites[J]. Journal Applied Mechanics, 1980, 47(2):329-334.
[16]	BRINSON L C, LAMMERING R. Finite element analysis of the behavior of shape memory alloys and their applications[J]. International Journal Solids Structures, 1993, 30:3261-3280.
[17]	BRINSON L C. One-dimensional constitutive behavior of shape memory alloys:Thermomechanical derivation with non-constant material functions and redefined martensite internal variable[J]. Journal Intelligent Material and Systems Structures, 1993, 4(2):229-242.
[18]	WANG Z, ZHOU Y, MALLICK P K. Effects of temperature and strain rate on the tensile behavior of short fiber reinforced polyamide-6[J]. Polymer Composites, 2002, 23(5):858-871.
[19]	BIRON M. Thermoplastics and thermoplastic composites[M]. 2nd ed. Massachusetts:William Andrew, 2013.
[20]	THOMASON J L. The influence of fibre length, diameter and concentration on the modulus of glass fibre reinforced polyamide 6,6[J]. Composites Part A:Applied Science & Manufacturing, 2008, 39(11):1732-1738.
[21]	THOMASON J L. The influence of fibre length, diameter and concentration on the impact performance of long glass-fibre reinforced polyamide 6,6[J]. Composites Part A:Applied Science & Manufacturing, 2009, 40(2):114-124.
[22]	ZHOU Y, MALLICK P K. A non-linear damage model for the tensile behavior of an injection molded short E-glass fiber reinforced polyamide-6,6[J]. Materials Science Engineering A, 2005, 393(1):303-309.
[23]	KHALILI S M R, BOTSHEKANAN D M, SHARIYAT M. Modeling and transient dynamic analysis of pseudoelastic SMA hybrid composite beam[J]. Applied Mathematics and Computation, 2013, 219(8):9762-9782.
[24]	SHARIYAT M, HOSSEINI S H. Accurate eccentric impact analysis of the preloaded SMA composite plates, based on a novel mixed-order hyperbolic global-local theory[J]. Composite Structures, 2015, 124:140-151.
[25]	BIENIAS J, JAKUBCZAK P, DADEJ K. Low-velocity impact resistance of aluminium glass laminates-Experimental and numerical investigation[J]. Composite Structures, 2016, 152:339-348.
[26]	MIRAMINI A, KADKHODAEI M, ALIPOUR A, et al. Analysis of interfacial debonding in shape memory alloy wire-reinforced composites[J]. Smart Materials and Structures, 2015, 25(1):015032.
[27]	ZHANG R, NI Q Q, NATSUKI T, et al. Mechanical properties of composites filled with SMA particles and short fibers[J]. Composite Structures, 2007, 79(1):90-96.
[28]	ASAEE Z, TAHERI F. Experimental and numerical investigation into the influence of stacking sequence on the low-velocity impact response of new 3D FMLs[J]. Composite Structures, 2016, 140:136-146.
[29]	ASAEE Z, SHADLOU S, TAHERI F. Low-velocity impact response of fiberglass/magnesium FMLs with a new 3D fiberglass fabric[J]. Composite Structures, 2015, 122:155-165.

Full-Text