碳纤维增强环氧树脂复合材料与铝板胶螺混合连接接头失效仿真
Failure simulation of carbon fiber reinforced epoxy resin composite-aluminum bonded-bolted hybrid joint

DOI: 10.13801/j.cnki.fhclxb.20181217.002

Keywords: 碳纤维增强聚合物复合材料(CFRP),胶螺混合连接接头,有限元分析,失效,承载力
carbon fiber reinforced polymer(CFRP),bonded-bolted hybrid joint,finite element analysis,failure,carrying capacity

Full-Text   Cite this paper   Add to My Lib

Abstract:

References

[1]	LEE Y H, LIM D W, CHOI J H, et al. Failure load evaluation and prediction of hybrid composite double lap joints[J]. Composite Structures, 2010, 92(12):2916-2926.
[2]	ISLAM M S, TONG L. Influence of pinning on static strength of co-cured metal-GFRP hybrid single lap joints[J]. Composites Part A:Applied Science & Manufacturing, 2016, 84:196-208.
[3]	FRANCO G D, FRATINI L, PASTA A. Analysis of the mechanical performance of hybrid (SPR/bonded) single-lap joints between CFRP panels and aluminum blanks[J]. International Journal of Adhesion and Adhesives, 2013, 41:24-32.
[4]	FIORE V, ALAGNA F, GALTIERI G, et al. Effect of curing time on the performances of hybrid/mixed joints[J]. Composites Part B:Engineering, 2013, 45(1):911-918.
[5]	BOIS C, HERVé W, WAHL J C, et al. An analytical model for the strength prediction of hybrid (bolted/bonded) composite joints[J]. Composite Structures, 2013, 97:252-260.
[6]	PAROISSIEN E, LACHAUD F, SCHWARTZ S. Simplified stress analysis of hybrid (bolted/bonded) joints[J]. International Journal of Adhesion & Adhesives, 2017, 77:183-197.
[7]	马毓, 赵启林. 复合材料胶-螺混合连接接头承载力分析[J]. 复合材料学报, 2011, 28(4):225-230.MA Yu, ZHAO Qilin. Analysis of the bonded-bolted hybrid composite joints' carrying capacity[J]. Acta Materiae Compositae Sinica, 2011, 28(4):225-230(in Chinese).
[8]	袁辉, 刘鹏飞, 赵启林, 等. 胶-螺混合连接承载力的参数影响研究[J]. 玻璃钢/复合材料, 2013, 3:66-71.YUAN Hui, LIU Pengfei, ZHAO Qilin, et al. Research on the influence factors of the bearing capacity for bonded-bolted hybrid joints[J]. Fiber Reinforced Plastics/Composites, 2013, 3:66-71(in Chinese).
[9]	JIN H K, JAE W J, TAE H K, et al. Failure of carbon composite-to-aluminum joints with combined mechanical fastening and adhesive bonding[J]. Composite Structures, 2006, 75(1):192-198.
[10]	RYU C O, CHOI J H, KWEON J H. Failure load prediction of composite joints using linear analysis[J]. Journal of Composite Materials, 2007, 41(7):865-878.
[11]	MCCARTHY C T, MCCARTHY M A. Three-dimensional finite element analysis of single-bolt, single-lap composite bolted joints Part II:Effects of bolt-hole clearance[J]. Composite Structures, 2005, 71(2):159-175.
[12]	曾昭炜, 刘红武. 复合材料层合板多钉连接钉载分配分析[J]. 无线互联科技, 2017, 14:103-105.ZENG Zhaowei, LIU Hongwu. Analysis of nailing distribution of multi-nail connection of composite laminates[J]. Wireless Internet Technology, 2017, 14:103-105(in Chinese).
[13]	陈珅艳, 林志伟, MOHAMED Yasser Mahmoud, 等. 复合材料π接头渐进失效分析[J]. 计算机辅助工程, 2011, 20(3):19-24.CHEN Kunyan, LIN Zhiwei, MOHAMED Yasser Mahmoud, et al. Progressive failure analysis on composite π joint[J]. Computer Aided Engineering, 2011, 20(3):19-24(in Chinese).
[14]	姜华强. 复合材料层压板的损伤评估与修理研究[D]. 南京:南京航空航天大学, 2011:15-16.JIANG Huaqiang. Research on damage assessment and repair of composite laminate[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2011:15-16(in Chinese).
[15]	王志强. 复合材料层压板螺栓连接性能分析[D]. 哈尔滨:哈尔滨工程大学, 2010:36-37.WANG Zhiqiang. Property analysis of the composite laminate bolted joints[D]. Harbin:Harbin Engineering University, 2010:36-37(in Chinese).
[16]	吕霞. 复合材料机械连接局部应力与强度的影响因素研究[D]. 南京:南京航空航天大学, 2013:8-9.LV Xia. Study on the effects affecting local stress and failure strength of composite mechanically fastened joints[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2013:8-9(in Chinese).
[17]	MATSUZAKI R, SHIBATA M, TODOROKI A. Improving performance of GFRP/aluminum single lap joints using bolted/co-cured hybrid method[J]. Composites Part A:Applied Science and Manufacturing, 2008, 39(2):154-163.
[18]	UCSNIK S, SCHEERER M, ZAREMBA S, et al. Experimental investigation of a novel hybrid metal-composite joining technology[J]. Composites Part A:Applied Science and Manufacturing, 2010, 41(3):369-374.
[19]	ZUCCARELLO B, FRANCO G D. Analysis and optimization of hybrid double lap aluminum-GFRP joints[J]. Composite Structures, 2014, 116(1):682-693.
[20]	MARANNANO G, ZUCCARELLO B. Numerical experimental analysis of hybrid double lap aluminum-CFRP joints[J]. Composites Part B:Engineering, 2015, 71:28-39.
[21]	程小全, 汪源龙, 张纪奎, 等. 平面编织复合材料胶螺混合连接接头拉伸性能分析[J]. 固体力学学报, 2011, 32(4):346-352.CHENG Xiaoquan, WANG Yuanlong, ZHANG Jikui, et al. Tensile performance analysis of combined adhesive and bolted joints for plain woven composites[J]. Chinese Journal of Solid Mechanics, 2011, 32(4):346-352(in Chinese).
[22]	孟毛毛, 赵美英, 弥晓亮, 等. 胶-螺混合连接结构强度分析及影响因素研究[J]. 航空工程进展, 2013, 4(2):186-192.MENG Maomao, ZHAO Meiying, MI Xiaoliang, et al. Analysis of the bonded-bolted hybrid composite joints' strength and influences[J]. Advances in Aeronautical Science and Engineering, 2013, 4(2):186-192(in Chinese).
[23]	FIONN D, NIK P. Introduction to computational plasticity[M]. England:Oxford University Press, 2005:175-176.
[24]	章继峰, 谢永刚, 张璐. 接头局部增强的复合材料层合板螺栓连接试验与数值模拟[J]. 复合材料学报, 2013, 30(6):191-196.ZHANG Jifeng, XIE Yonggang, ZHANG Lu. Experimental and numerical simulation of composite laminates bolted joints with local reinforcement[J]. Acta Materiae Compositae Sinica, 2013, 30(6):191-196(in Chinese).

Full-Text