碳纤维增强聚合物复合材料车身T型接头静态性能与失效机制
Performance and failure mechanics of carbon fiber reinforced polymer composite T-joint in quasi-static loading for automobile structures

DOI: 10.13801/j.cnki.fhclxb.20181114.001

Keywords: 热塑碳纤维增强聚合物复合材料(CFRP),单冒型T型接头,力学性能,理论预测,有限元分析,弯扭耦合
thermoplastic carbon fiber reinforced polymer (CFRP),single hat-shaped T-joint,mechanical behavior,analytical model,finite element analysis,bending-torsion coupling

Full-Text   Cite this paper   Add to My Lib

Abstract:

References

[1]	NING H, VAIDYA U K, JANOWSKI G M, et al. Design, manufacture and analysis of a thermoplastic composite frame structure for mass transit[J]. Composite Structures, 2007, 80:105-116.
[2]	BELINGARDI G, BEYENE A T, KORICHO E G. Geometrical optimization of bumper beam profile made of pultruded composite by numerical simulation[J]. Composite Structures, 2013, 102:217-225.
[3]	BELINGARDI G, KORICHO E G. Implementation of composite material car body structural joint and investigation of its characteristics with geometry modifications[C]. 14th European Conference on Composite Materials, Budapest, 2010.
[4]	JONG-KEUN C, YONG R, SEOK H, et al. Study on the beam modelling box channel structure:For the T type joint structure[J]. SAE, 1996:960554.
[5]	BURNS L, MOURITZ A P, POOK D, et al. Strengthening of composite T-Joints using novel ply design approaches[J]. Composites Part B:Engineering, 2016, 88:73-84.
[6]	ASTM. Standard test method for tensile properties of polymer matrix composite materials:ASTM D3039[S]. Philadelphia:American Society for Testing and Materials, 1995:99-109.
[7]	ASTM. Standard test method for compressive properties of unidirectional or cross-ply fiber-resin composites:ASTM D3518[S]. Philadelphia:American Society for Testing and Materials, 1987.
[8]	HASHIN Z, ROTEM A. A fatigue failure criterion for fibre reinforced materials[J]. Journal of Composite Materials, 1973, 7:448-464.
[9]	KORICHO E G, BELINGARDI G. An experimental and finite element study of the transverse bending behaviour of CFRP composite T-Joints in vehicle structures[J]. Compo-sites Part B:Engineering, 2015, 79:430-443.
[10]	ASTM. Standard test method for compressive properties of unidirectional or cross-ply fiber-resin composites:ASTM D3410[S]. Philadelphia:American Society for Testing and Materials, 1987:132-139.
[11]	HASHIN Z. Failure criteria for unidirectional fiber compo-sites[J]. Journal of Applied Mechanics, 1980, 47:329-334.
[12]	MUTUA J, KIHIU J M, RADING G O, et al. Use of magnesium alloys in optimizing the weight of automobile:Current trends and opportunities[J]. Sustainable Research and Innovation Proceedings, 2011, 3.
[13]	LIU Q, LINA Y, ZONGA Z, et al. Lightweight design of carbon twill weave fabric composite body structure for electric vehicle[J]. Composite Structures, 2013, 97:231-238.
[14]	NING H, PILLAY S, VAIDYA U K. Design and development of thermoplastic composite roof door for mass transit bus[J]. Materials Design, 2009, 30:983-991.
[15]	THATTAIPARTHASARTHY K B, PILLAY S, NING H, et al. Process simulation, design and manufacturing of a long fiber thermoplastic composite for mass transit application[J]. Composites Part A:Applied Science Manufacturing, 2008, 39:1512-1521.
[16]	JANOWSKI G M, VAIDYA U K, HUSMAN G. Thermoplastic sandwich structure design and manufacturing for the body panel of mass transit vehicle[J]. Composite Structures, 2007, 80:82-91.
[17]	BARTUS S D, VAIDYA U K, ULVEN C A. Design and development of a long fiber thermoplastic bus seat[J]. Journal of Thermoplast Composite Materials, 2006, 19:131-154.
[18]	GLISZCZYNSKI A, KUBIAK T. Load-carrying capacity of thin-walled composite beams subjected to pure bending[J]. Thin-Walled Structures, 2017, 115:76-85.
[19]	CZECHOWSKI L, GLISZCZYNSKI A, BIENIAS J, et al. Failure of GFRP channel section beams subjected to bending-numerical and experimental investigations[J]. Composites Part B:Engineering, 2017, 111:112-123.
[20]	BELINGARDI G, OBRADOVIC J. Influence of geometry modification of vehicle body joints on their structural behaviour[C]. XXII Intl. Automotive Conference, Belgrade, 2009:1-12.
[21]	FAI T C, SAID M R. The effect of diaphragm in continuous sill member on the strength of automotive B-Pillar[J]. Journal Teknology, 2007, 47(A):35-53.
[22]	HOU W B, XU X Z, WANG H F, et al. Bending behavior of single hat-shaped composite T-joints under out-of-plane loading for lightweight automobile structures[J]. Journal of Reinforced Plastics Composites, 2018, 37(12):808-823.
[23]	王海丰, 于野, 许现哲, 等. 车身碳纤维接头横向弯曲性能研究[J]. 汽车工程, 2019, 41(1):86-90, 111.WANG H F, YU Y, XU X Z, et al. A study of transverse bending behavior of CFRP T-joint in vehicle-body[J]. Automotive Engineering, 2019, 41(1):86-90, 111(in Chinese).

Full-Text