|
|
- 2019
SnO2-Fe2O3复合材料应用于碳纳米管集流体对锂离子电池性能的影响
|
Abstract:
水热合成法制备纳米SnO2-Fe2O3复合材料，以SnO2-Fe2O3为活性物质，多壁碳纳米管（MWCNTs）导电纸代替传统铜箔作为负极集流体制作锂离子电池。采用XRD、SEM进行表征，结果显示，SnO2-Fe2O3均匀嵌入到MWCNTs构建的三维导电网络的空隙中。电化学测试结果表明，SnO2-Fe2O3/MWCNTs导电纸作为负极电极能够显著提高锂离子电池的循坏和倍率性能。在100 mA/g电流密度下循环30次，SnO2-Fe2O3/MWCNTs导电纸电池比容量达到1 088 mAh/g，而在200 mA/g电流密度下循环200次后，SnO2-Fe2O3/MWCNTs导电纸比容量能稳定保持在898 mAh/g，表现出良好的循环性能，逐渐增大充放电电流，电池的比容量有所下降但其库伦效率仍然保持在96%以上，而在高倍率（1 600 mA/g）下进行充放电时，SnO2-Fe2O3/MWCNTs导电纸比容量仍然能够保持在547 mAh/g，之后再将电流密度降到100 mA/g，比容量重新回到1 000 mAh/g，SnO2-Fe2O3/MWCNTs导电纸表现出十分优异的电化学性能。 The nano-SnO2-Fe2O3 composites were prepared by hydrothermal synthesis method and were used as the active material for lithium-ion batteries. The multi-walled carbon nanotubes (MWCNTs) conductive paper was used as the collector instead of traditional copper foil. The lithium-ion batteries were assembled with SnO2-Fe2O3/MWCNTs conductive paper as anode and metal lithium foil as the counter electrodes. The structure and physical properties of electrodes were characterized by XRD and SEM. The results show that SnO2-Fe2O3 is uniformly intercalated in the bores of the 3D conductive network constructed by MWCNTs. The results of electrochemical tests show that SnO2-Fe2O3/MWCNTs conductive paper electrodes can improve the cycle and rate performance of lithium-ion batteries significantly. The specific capacity of SnO2-Fe2O3/MWCNTs conductive paper electrode can reach 1088 mAh/g at the current density of 100 mA/g after 30 cycles. The specific capacity of SnO2-Fe2O3/MWCNTs conductive paper can maintain at 898 mAh/g with 200 mA/g current density after cycling 200 cycles. The specific capacity of SnO2-Fe2O3/MWCNTs conductive paper decreases with the increase of the current density, but the coulombic efficiency still remain above 96%. While the current increases to 1 600 mA/g, the capacity of SnO2-Fe2O3/MWCNTs conductive paper still maintain at 547 mAh/g. The specific capacity of SnO2-Fe2O3/MWCNTs conductive paper can recover to 1 000 mAh/g while the current reduces to 100 mA/g, and SnO2-Fe2O3/MWCNTs conductive paper exhibit excellent rate performance. 江西省科技厅（20142BBE50071）；江西省教育厅（KJLD13006
| [1] | DUNN B, KAMATH H, TARASCON J M. Electrical energy storage for the grid:A battery of choices[J]. Science, 2011, 334(6058):928-935. |
| [2] | HAAG J M, PATTANAIK G, DURSTOCK M F. Nanostructured 3D electrode architectures for high-rate Li-ion batteries[J]. Advanced Materials, 2013, 25(23):3238-3243. |
| [3] | TARASCON J M, ARMAND M. Issues and challenges facing rechargeable lithium batteries[J]. Nature, 2001, 414(6861):359-367. |
| [4] | WINTER M, BESENHARD J O, SPAHR M E, et al. Insertion electrode materials for rechargeable lithium batteries[J]. Advanced Materials, 2010, 10(10):725-763. |
| [5] | POIZOT P, LARUELLE S, GRUGEON S, et al. Nano-sized transition-metal oxides as negative-electrode materials for lithium-ion batteries[J]. Nature, 2000, 407(6803):496-499. |
| [6] | YU Y, CHEN C H, SHI Y. A tin-based amorphous oxide composite with a porous, spherical, multideck-cage morphology as a highly reversible anode material for lithium-ion batteries[J]. Advanced Materials, 2007, 19(7):993-997. |
| [7] | WANG Y, CAO G. Developments in nanostructured cathode materials for high-performance lithium-ion batteries[J]. Advanced Materials, 2010, 20(12):2251-2269. |
| [8] | PITCHAI R, THAVASI V, MHAISALKAR S G, et al. Nanostructured cathode materials:A key for better performance in Li-ion batteries[J]. Journal of Materials Chemistry, 2011, 21(30):11040-11051. |
| [9] | JIANG Y, LI Y, YAN M, et al. Abnormal behaviors in electrical transport properties of cobalt-doped tin oxide thin films[J]. Journal of Materials Chemistry, 2012, 22(31):16060-16065. |
| [10] | WANG C M, XU W, LIU J, et al. In situ transmission electron microscopy observation of microstructure and phase evolution in a SnO2 nanowire during lithium intercalation[J]. Nano Letters, 2011, 11(5):1874-1880. |
| [11] | 刘珍红, 孙晓刚, 邱治文, 等. 多壁碳纳米管纸作正极集流体的锂硫电池性能[J]. 复合材料学报, 2017, 34(4):873-880. LIU Z H, SUN X G, QIU Z W, et al. Performance of lithium sulfur batteries using multiwalled carbon nanotube paper as cathode current collector[J]. Acta Materiae Compositae Sinica, 2017, 34(4):873-880(in Chinese). |
| [12] | XING L L, CUI C X, DENG P, et al. Template-free assembly of α-FeO-SnO core-shell nanorod arrays on titanium foil and their excellent lithium storage performance[J]. RSC Advances, 2013, 3(26):10379-10384. |
| [13] | WU W, ZHAO Y, LI J, et al. A ternary phased SnO2-Fe2O3/SWCNTs nanocomposite as a high performance anode material for lithium ion batteries[J]. Journal of Energy Chemistry, 2014, 23(3):376-382. |
| [14] | YUAN T, JIANG Y, LI Y, et al. Enhanced lithium storage performance in three-dimensional porous SnO2-Fe2O3, composite anode films[J]. Electrochimica Acta, 2014, 136(8):27-32. |
| [15] | GOODENOUGH J B, PARK K S. The Li-ion rechargeable battery:A perspective[J]. Journal of the American Chemical Society, 2013, 135(4):1167-1176. |
| [16] | ARMAND M, TARASCON J M. Building better batteries[J]. Nature, 2008, 451(7179):652-657. |
| [17] | DAHN J R, ZHENG T, LIU Y, et al. Mechanisms for lithium insertion in carbonaceous materials[J]. Science, 1995, 270(5236):590-593. |
| [18] | IDOTA Y, KUBOTA T, MATSUFUJI A, et al. Tin-based amorphous oxide:A high-capacity lithium-ion-storage material[J]. Science, 1997, 276(5317):1395-1397. |
| [19] | ZHOU W W, CHENG C W, LIU J P, et al. Epitaxial growth of branched α-Fe2O3/SnO2 nano-heterostructures with improved lithium-ion battery performance[J]. Advanced Functional Materials, 2011, 21(13):2439-2445. |
| [20] | RAHMAN M M, GLUSHENKOV A M, RAMIREDDY T, et al. Enhanced lithium storage in Fe2O3-SnO2-C nanocomposite anode with a breathable structure[J]. Nanoscale, 2013, 5(11):4910-4916. |
| [21] | CHEN C H, KELDER E M, SCHOONMAN J. Functional ceramic films with reticular structures prepared by electrostatic spray deposition technique[J]. Journal of the Electrochemical Society, 1997, 144(11):289-294. |
| [22] | SONG M K, PARK S, ALAMGIR F M, et al. Nanostructured electrodes for lithium-ion and lithium-air batteries:The latest developments, challenges, and perspectives[J]. Materials Science & Engineering R, 2011, 72(11):203-252. |
| [23] | JIANG J, LI Y, LIU J, et al. Building one-dimensional oxide nanostructure arrays on conductive metal substrates for lithium-ion battery anodes[J]. Nanoscale, 2011, 3(1):45-58. |
| [24] | JIANG Y, ZHANG D, LI Y, et al. Amorphous Fe2O3, as a high-capacity, high-rate and long-life anode material for lithium ion batteries[J]. Nano Energy, 2014, 4(2):23-30. |
| [25] | HUANG J Y, ZHONG L, WANG C M, et al. In situ observation of the electrochemical lithiation of a single SnO2 nanowire electrode[J]. Cheminform, 2011, 42(10):1515-1520. |
| [26] | 刘斌, 宋彬, 胡文胜, 等. 纳米Fe2O3-CuO复合氧化物的制备与电化学性能[J]. 复合材料学报, 2011, 28(2):191-195. LIU B, SONG B, HU W S, et al. Preparation and electrochemical properties of nano Fe2O3-CuO composite oxides[J]. Acta Materiae Compositae Sinica, 2011, 28(2):191-195(in Chinese). |
| [27] | MIAO C, LIU M, HE Y B, et al. Monodispersed SnO2, nanospheres embedded in framework of graphene and porous carbon as anode for lithium ion batteries[J]. Energy Storage Materials, 2016, 3:98-105. |
