Experimentally and Numerically Analyzed Piezoelectric Characteristics of PZT Ceramics | Yang | Journal of Materials Science Research | CCSE

The electric generation characteristics of the PZT piezoelectric ceramics were examined experimentally and numerically. In this case, cyclic bending loading was applied to the PZT ceramics: bulk and thin-film membrane. Electric voltage increased with increasing the strain value. There was a sharp initial increase in positive voltage for the PZT ceramics as bending load was applied. Following this initial increase stage, a rapid fall to zero occurred. The reduction rate of the positive voltage was changed depending on the rigidly of the PZT ceramic: the higher the reduction rate, the higher the rigid of the ceramic. The electrical voltage from the circular membrane PZT ceramic during cyclic loading showed the higher level compared to that for the bulk one, in which the flexibility of the PZT ceramic was significant factor to obtain the high electric voltage. The variation of the electric voltages was estimated numerically, which was relatively in good agreement with the experimental one.