Bicycle Level of Service for Route Choice—A GIS Evaluation of Four Existing Indicators with Empirical Data

Bicycle Level of Service (BLOS) indicators are used to provide objective ratings of the bicycle suitability (or quality) of links or intersections in transport networks. This article uses empirical bicycle route choice data from 467 university students in Trondheim, Norway to test the applicability of BLOS rating schemes for the estimation of whole-journey route choice. The methods evaluated share a common trait of being applicable for mixed traffic urban environments: Bicycle Compatibility Index (BCI), Bicycle Stress Level (BSL), Sixth Edition Highway Capacity Manual (HCM6), and Level of Traffic Stress (LTS). Routes are generated based on BLOS-weighted networks and the suitability of these routes is determined by finding the percentage overlap with empirical route choices. The results show that BCI provides the best match with empirical route data in all five origin–destination pairs, followed by HCM6. BSL and LTS which are not empirically founded have a lower match rate, although the differences between the four methods are relatively small. By iterating the detour rate that cyclists are assumed to be willing to make, it is found that the best match with modelled BLOS routes is achieved between 15 and 21% additional length. This falls within the range suggested by existing empirical research on willingness to deviate from the shortest path, however, it is uncertain whether the method will deliver the comparable findings in other cycling environments. View Full-Tex