Phthalimide‐Based High Mobility Polymer Semiconductors for Efficient Nonfullerene Solar Cells with Power Conversion Efficiencies over 13%

Highly efficient nonfullerene polymer solar cells (PSCs) are developed based on two new phthalimide‐based polymers phthalimide‐difluorobenzothiadiazole (PhI‐ffBT) and fluorinated phthalimide‐ffBT (ffPhI‐ffBT). Compared to all high‐performance polymers reported, which are exclusively based on benzo[1,2‐b:4,5‐b′]dithiophene (BDT), both PhI‐ffBT and ffPhI‐ffBT are BDT‐free and feature a D‐A1‐D‐A2 type backbone. Incorporating a second acceptor unit difluorobenzothiadiazole leads to polymers with low‐lying highest occupied molecular orbital levels (≈？5.6 eV) and a complementary absorption with the narrow bandgap nonfullerene acceptor IT‐4F. Moreover, these BDT‐free polymers show substantially higher hole mobilities than BDT‐based polymers, which are beneficial to charge transport and extraction in solar cells. The PSCs containing difluorinated phthalimide‐based polymer ffPhI‐ffBT achieve a substantial PCE of 12.74% and a large V oc of 0.94 V, and the PSCs containing phthalimide‐based polymer PhI‐ffBT show a further increased PCE of 13.31% with a higher J sc of 19.41 mA cm？2 and a larger fill factor of 0.76. The 13.31% PCE is the highest value except the widely studied BDT‐based polymers and is also the highest among all benzothiadiazole‐based polymers. The results demonstrate that phthalimides are excellent building blocks for enabling donor polymers with the state‐of‐the‐art performance in nonfullerene PSCs and the BDT is not necessary for constructing such donor polymers