Synthesis and Properties of Organic-Inorganic Hybrid Porous Polymers Obtained with Click Addition Reactions of Thiol-Functionalized Random Type Silsesquioxane by and Diacrylate or Diisocyanate Compounds
Organic-inorganic hybridnetwork polymers have been synthesized by
addition reaction of a thiol-functionalized random type silsesquioxane (SQ109)
and alkyl diacrylate or diisocyanate compounds. Thiol-ene reaction of SQ109 and
1,4-butanediol diacrylate (BDA) successfully yield porous polymer in toluene
initiated by azobis(isobutyronitrile) (AIBN) at 60°C.
Morphology of the porous polymers was composed by connected globules, and the
diameter of the globules decreased with increasing in the monomer concentration of the reaction system. By contrast, the reaction with 1,6-hexanediol diacrylate or 1,5-hexadiene yielded homogeneous clear gels.
Thermal analyses of SQ109-BDA porous polymers indicated that thermal
degradation of ester groups of BDA in the polymer network occurred at around
300°C. The porous polymer was also obtained by the reaction using a photo-initiator
(Irugacure184) at room temperature, and showed higher Young’s modulus than the
corresponding porous polymer obtained with the reaction with AIBN due to the
small size of the globules. Young’s modulus
of SQ109-BDA porous polymer increased with increasing in the monomer concentration of the
reaction systems. Thiolisocyanate addition reactions between SQ109 and hexamethylene diisocyanate (HDI) or
methylenediphenyl
References
[1]
Naga, N., Oda, E., Toyota, A., Horie, K. and Furukawa, H. (2006) Tailored Synthesis and Fundamental Characterization of Organic-Inorganic Hybrid Gels by Means of a Hydrosilylation Reaction. Macromolecular Chemistry and Physics, 207, 627-635. https://doi.org/10.1002/macp.200500501
[2]
Naga, N., Oda, E., Toyota, A. and Furukawa, H. (2007) Mesh Size Control of Organic-Inorganic Hybrid Gels by Means of a Hydrosilylation Co-Gelation of Siloxane or Silsesquioxane and α,ω-Non-Conjugated Dienes. Macromolecular Chemistry and Physics, 208, 2331-2338. https://doi.org/10.1002/macp.200700184
[3]
Naga, N., Kihara, Y., Miyanaga, T. and Furukawa, H. (2009) Synthesis of Organic-Inorganic Hybrid Gels from Siloxane or Silsesquioxane and α,ω-Nonconjugated Dienes by Means of a Photo Hydrosilylation Reaction. Macromolecules, 42, 3454-3462. https://doi.org/10.1021/ma802745x
[4]
Naga, N., Nagino, H. and Furukawa, H. (2016) Synthesis of Organic-Inorganic Hybrid Gels by Means of Thiol-Ene and Azide-Alkene Reactions. Journal of Polymer Science Part A: Polymer Chemistry, 54, 2229-2238. https://doi.org/10.1002/pola.28096
[5]
Naga, N., Fujioka, S., Inose, D., Ahmed, K., Nageh, H. and Nakano, T. (2020) Synthesis and Properties of Porous Polymers Synthesized by Michael Addition Reactions of Multi-Functional Acrylate, Diamine, and Dithiol Compounds. RSC Advances, 20, 60-69. https://doi.org/10.1039/C9RA09684A
[6]
Naga, N., Michida, R., Kudo, S., Nagami, Y., Moriyama, K., Nageh, H., Furukawa, H. and Nakano, T. (2019) Synthesis of Joint-Linker Type Gels and Porous Polymers by Addition Reactions of Multi-Functional Thiol and Alkyl Diacrylate, Diisocyanate Compounds. Materials Today Communications, 18, 153-162. https://doi.org/10.1016/j.mtcomm.2018.11.013
[7]
Liu, Z., Ou, J. and Zou, H. (2016) Click Polymerization for Preparation of Monolithic Columns for Liquid Chromatography. Trends in Analytical Chemistry, 82, 89-99. https://doi.org/10.1016/j.trac.2016.05.016
[8]
Murphy, A.R., Ghobrial, I., Jamshidi, P., Laslett, A., O’brien, C.M. and Cameron, N.R. (2017) Tailored Emulsion-Templated Porous Polymer Scaffolds for iPSC-Derived Human Neural Precusor Cell Culture. Polymer Chemistry, 8, 6617-6627. https://doi.org/10.1039/C7PY01375B
[9]
Alves, F. and Nischang, I. (2013) Tailor-Made Hybrid Organic-Inorganic Porous Materials Based on Polyhedral Oligomeric Silsesquioxane (POSS) by the Step-Growth Mechanism of Thiol-Ene “Click” Chemistry. Chemistry—A European Journal, 19, 17310-17313. https://doi.org/10.1002/chem.201303759
[10]
Imoto, H., Ishida, A., Hashimoto, M., Mizoue, Y., Yusa, S. and Naka, K. (2019) Soluble Network Polymers Based on Trifunctional Open-Cage Silsesquioxanes. Chemistry Letters, 48, 1266-1269. https://doi.org/10.1246/cl.190536
[11]
Li, C., Tan, J., Li, H., Yin, D., Gu, J., Zhang, B. and Zhang, Q. (2015) Thiol-Isocyanate Click Reaction in a Pickering Emulsion: A Rapid and Efficient Route to Encapsulation of Healing Agents. Polymer Chemistry, 6, 7100-7111. http://pubs.rsc.org/-/content/articlehtml/2015/py/c5py01323b https://doi.org/10.1039/C5PY01323B
[12]
Dailing, E.A., Nair, P., Setterberg, W.K., Kyburz, K.A., Yang, C., D’Ovidio, T., Anseth, K.S. and Stansbury, J.W. (2016) Combined, Independent Small Molecule Release and Shape Memory via Nanogel-Coated Thiourethane Polymer Networks. Polymer Chemistry, 7, 816-825. https://doi.org/10.1039/C5PY01464F http://pubs.rsc.org/en/Content/ArticleLanding/2016/PY/c5py01464f#!divAbstract
[13]
Tan, J., Li, C., Li, H., Zhang, H., Gu, J., Zhang, B., Zhang, H. and Zhang, Q. (2015) Water-Borne Thiol-Isocyanate Click Chemistry in Microfluidics: Rapid and Energy-Efficient Preparation of Uniform Particles. Polymer Chemistry, 6, 4366-4373. http://pubs.rsc.org/en/Content/ArticleLanding/2015/PY/C5PY00412H#!divAbstract https://doi.org/10.1039/C5PY00412H
[14]
Jia, Y., Shi, B., Jin, J. and Li, J. (2019) High Refractive Index Polythiourethane Networks with High Mechanical Property via Thiol-Isocyanate Click Reaction. Polymer, 180, Article ID: 121746. https://doi.org/10.1016/j.polymer.2019.121746
[15]
Fedors, R.F. (1974) A Method for Estimating Both the Solubility Parameters and Molar Volumes of Liquids. Polymer Engineering & Science, 14, 147-154. https://doi.org/10.1002/pen.760140211
[16]
Blanco, I., Abate, L., Bottino, F.A., Bottino, P. and Chiacchio, M.A. (2012) Thermal Degradation of Differently Substituted Cyclopentyl Polyhedral Oligomeric Silsesquioxane (CP-POSS) Nanoparticles. Journal of Thermal Analysis and Calorimetry, 107, 1083-1091. https://doi.org/10.1007/s10973-011-1848-3
[17]
Rogulska, M., Kultys, A. and Olszewska, E. (2013) New Thermoplastic Poly(thiourethane-urethane) Elastomers Based on Hexane-1,6-diyl Diisocyanate (HDI). Journal of Thermal Analysis and Calorimetry, 114, 903-916. https://doi.org/10.1007/s10973-013-3007-5
