The correlation between the initial time value of transient iterative parameters and the blowing pressure in the numerical simulation process of blowing balloon is investigated by POLYFLOW. The results show that: 1) As the blow molding pressure increases, the boundary value of the iterative time step decreases rapidly at first and then slowly. At the end of the first step of iterative calculation for each boundary value, the balloon parison is in the mold core cavity. 2) If the initial time value of transient iterative parameters is smaller than the boundary value of the iterative time step, the balloon parison is still in the mold core cavity at the end of the first iteration. However, if the iterative calculation continues, the calculation process may be interrupted when the time step is smaller than the initial time value of the transient iterative parameters, which makes the blow molding simulation of balloon unable to continue. 3) It is suggested that the initial time value of transient iterative parameters is one order of magnitude smaller than the boundary value of the iterative time step to complete smoothly the simulation of blow molding balloon.
References
[1]
Fu, X.L. (2007) Study on Numerical Simulation and Process of Balloon Molding. Beijing University of Chemical Technology, Beijing.
[2]
Menary, G.H. and Armstrong, C.G. (2006) Experimental Study and Numerical Modeling of Injection Stretch Blow Moulding of Angioplasty Balloons. Plastics Rubber & Composites, 35, 348-354. https://doi.org/10.1179/174328906X143877
[3]
Yang, J.L., Liu, H.S., Huang, X.Y., et al. (2011) Applications of Polyflow Inverse Extrusion Method in the Design of T-Shaped Plastics Profile Extrusion Die. Plastics, 40, 114-117.
[4]
Sun, Q.Y. and Qu, X.Y. (2018) Design and Simulation Analysis of Plastic Cast Mould Based on Polyflow. Plastics Science and Technology, 46, 97-101.
[5]
Xu, X., Li, B.Q., Jin, M., et al. (2015) Simulation for Pipe Molding Devices with Two Dies Based on Polyflow. China Plastics, 29, 98-101.
[6]
Gan, X.H., Cao, J.Y., Yang, C.C., et al. (2010) The Stretch Forming Process of Fiber Based on Polyflow Numerical Simulation. Journal of Donghua University (Natural Science), 36, 271-274.
[7]
Gan, X.H., Ma, X.J., Liu, Q., et al. (2011) Numerical Simulation Research of Extrusion-Forming Process of Cross Fibers Based on Polyflow. Journal of Textile Research, 32, 132-136.
[8]
Zhao, F., Jia, M.Y., Xue, P., et al. (2011) Die Runners Design of Wpc Construction Wallboard Profiles Based on Polyflow Simulation. Engineering Plastics Application, No. 6, 35-39.
[9]
Jiang, W.X., Huang, Z.G., Zhao, Y.L., et al. (2017) Extrusion Analysis of Tianzi-Shaped Tray of Food Based on Polyflow. Food & Machinery, 33, 86-90.
[10]
Zhou, Z.H., Chen, S.K., He, C.L., et al. (2013) Thermoforming Process of Cup Making Machine Based on Polyflow Simulation. Plastics, 42, 96-98, 44.
[11]
Zhou, Z.H., Chen, S.K. and He, C.L. (2013) The Shape Optimization for the Cup Making Machine’s Plug Based on Polyflow. China Plastics Industry, 41, 54-58.
[12]
Gupta, S., Uday, V., Raghuwanshi, A.S., et al. (2013) Simulation of Blow Molding Using Ansys Polyflow. APCBEE Procedia, 5, 468-473.
https://doi.org/10.1016/j.apcbee.2013.05.079
[13]
Suraya, S., Azman, M.D., Fatchurrohman, N., et al. (2016) Simulation on the Effect of Bottle Wall Thickness Distribution using Blow Moulding Technique. IOP Conference Series: Materials Science and Engineering, 114, Article ID: 012004.
https://doi.org/10.1088/1757-899X/114/1/012004
