全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...

环境温湿度变化对PA6-GF15韧性影响
Investigation on Environmental Change to PA6-GF15 Toughness Property

DOI: 10.12677/APP.2020.104032, PP. 257-261

Keywords: 尼龙PA6,含水率,环境温度/湿度,缺口冲击强度
Nylon PA6
, Water Absorption, Environmental Temperature/Humidity, Notch Impact Strength

Full-Text   Cite this paper   Add to My Lib

Abstract:

汽车座椅及内饰产品中一些零件常用到PA复合材料,其干态与湿态条件下的韧性差异很大。本文研究了PA6-GF15样条的含水率受环境温湿度的变化规律及对缺口冲击强度的影响,结果表明随时间的变化,在干燥的环境中含水率逐渐降低,在湿润的环境中含水率会缓慢上升;样条含水率发生变化后,低温缺口冲击强度变化不大,室温下的缺口冲击强度会随含水率的变化而发生显著变化。
PA composite always used by seats and interior parts, in which toughness property is a significant difference between the condition of dry and humid. In this paper, we studied the environmental temperature and humidity changes effect to PA6-GF15 samples performance such as water absorption and notched impact. The results show that water content of PA6-GF15 samples gradually reduced in the dry environment and increased in humid environment; at low temperature, notch impact strength was not obviously affected by water absorption but obviously at room temperature.

References

[1]  吕桂英, 朱华, 林安, 等. 现代测试技术在尼龙6老化研究中的应用[J]. 工程塑料应用, 2006, 34(2): 64-66.
[2]  谭寿再, 杨崇岭, 李建刚. 纳米碳酸钙对PA6/PP共混合金的性能影响[J]. 工程塑料应用, 2011, 39(12): 31-34.
[3]  黄虹文, 刘长维, 韦加崇. 原位聚合La2O3/MC尼龙复合材料的制备与性能[J]. 塑料, 2008, 37(3): 69-71.
[4]  杨明山. 尼龙6与改性PP的共混研究[J]. 高分子材料科学与工程, 1996, 12(3): 85-89.
[5]  宁冲冲, 崔益华, 吴银财, 徐娟, 等. 降低尼龙制品吸水率的研究进展[J]. 塑料科技, 2013, 41(1): 105-108.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133