|
基于Bragg光栅的电力电缆温度在线测量方法研究
|
Abstract:
依据光纤Bragg光栅测温原理,研究了电力电缆温度在线监测方法。通过ANSYS有限元仿真,得出电缆内部温度云图,建立电缆缆芯温度与表皮温度的温升方程,并与IEC-60287标准进行比对,证明仿真所得温升方程具有更高的准确性。根据实验原理图,选择合适器件,搭建实验系统。
Based on the principle of temperature measurement of fiber Bragg grating, the online monitoring method for power cable temperature is studied. Through ANSYS finite element simulation, the inner temperature cloud diagram of the cable is obtained and the temperature rise equation of cable core temperature and skin temperature is established. Compared with IEC-60287 standard, it is proved that the temperature rise equation is more accurate, according to the experimental schematic diagram, to select the appropriate device and build the experimental system.
[1] | 杜莉. 电力电缆无线温度监测系统设计[J]. 北京工业职业技术学院学报, 2020, 19(1): 23-27. |
[2] | 曾含含, 程静, 张大伟, 等. 基于光纤光栅温度传感器的电缆接头温度监测系统的设计[J]. 电子测量技术, 2018, 41(6): 124-128. |
[3] | 贾书丽, 姚国珍. 光纤光栅传感器在电力电缆测温系统中的应用[J]. 广东电力, 2011, 24(6): 61-64. |
[4] | 许远标, 魏鹏. 光纤光栅温湿度检测系统研究[J]. 仪表技术与传感器, 2019(11): 70-73+77. |
[5] | 虢红霞. 基于光纤光栅的电力电缆温度在线监测系统研究[D]: [硕士学位论文]. 武汉: 武汉理工大学, 2010. |
[6] | IEC-60287-2-1 (1994) Electric Cable-Calculation of the Current Rating-Part II: Current Rating Equations (100% Load Factor) and Calculations of Thermal Resistance. IEC Publication, 287. |
[7] | 赵洋洋. 基于光栅光纤传感的电力电缆在线监测系统研究[D]: [硕士学位论文]. 武汉: 武汉理工大学, 2011. |
[8] | 刘书铭, 王振东, 杜志叶, 等. 基于ANSYS的交联聚乙烯绝缘电缆温度场有限元计算方法[P]. 河南: CN104899379A, 2015-09-09. |
[9] | 李滨, 钟世敏. 结合形状因子法和平均温度差法对热力管道热损失计算的初探[J]. 机电信息, 2012(20): 41-43. |
[10] | 杜宁宁. 光纤Bragg光栅温度解调系统设计[D]: [硕士学位论文]. 大连: 大连理工大学, 2010. |
[11] | 赵勇图, 彭东林, 郑永, 王伟, 王露露. 基于小波变换与LabVIEW的时栅信号采集分析系统设计[J]. 仪表技术与传感器, 2019(8): 106-111. |