全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...

半刚性基层材料动态抗压模量试验研究
Experimental Study on Dynamic Compressive Modulus of Semi-Rigid Base Materials

DOI: 10.12677/HJCE.2019.810167, PP. 1431-1437

Keywords: 动态抗压模量,半刚性基层,应变,频率
Dynamic Compressive Modulus
, Semi-Rigid Base, Strain, Frequency

Full-Text   Cite this paper   Add to My Lib

Abstract:

本文通过研究二灰碎石、石灰稳定土和二灰土三种不同的半刚性基层材料在不同的应变和频动条件下的动态模量。可以得出这三种半刚性基层在应力状态下,动态模量随加载频率的增大而增大,同时动态模量具有应力依赖性,即随着荷载的增大(轴向应变增大),动态模量减小的规律。
This paper studies the dynamic modulus of three different semi-rigid base materials (two ash gravel, lime improved soil and two lime soil) under different strain and frequency conditions. Under the same stress state, the dynamic modulus of these three semi-rigid base materials increases with the increase of loading frequency. At the same time, the dynamic modulus has stress dependence. As the load increases (the axial strain increases), the dynamic modulus of this material decreases.

References

[1]  沙庆林. 高等级公路半刚性基层沥青路面[M]. 北京: 人民交通出版社, 1998: 338-360.
[2]  Thompson, M.R. (1994) High-Strength Stabilized Base Thickness Design Procedure. Transportation Research Record.
[3]  Portland Cement Association (1995) Soil-Cement Constuction Handbook.
[4]  Thompson, M.R. (1986) Mechanistic Design Concept for Stabilized Base Pavements. Civil Engineering Studies, Transportation Engineering Series No. 46, Cooperative Highway and Transportation Series No. 214, University of Llinois, Urbana.
[5]  U.S. Department of Transportation (1981) Federal Aviation Administration AC NO. 150/5370-10.
[6]  Sherwood, P.T. (1968) The Properties of Cement-Stabilized Material, RRL Report LR 205, Road Receach Laboratory, England.
[7]  张立翔. 混凝土疲劳损伤强度可靠置信限分析[J]. 工程力学, 2004, 21(4): 39-43.
[8]  余寿文, 冯西桥. 损伤力学[M]. 北京: 清华大学出版社, 1997: 282-285.
[9]  Butler, J.E. (1989) The Performance of Concrete Containing High Proportions of Steel Fiber with Particular Reference to Rapid Fatigue Loading, FRCC Recent Development. ACI, 12, 32-38.
[10]  Lemaitre, J. (1984) How to Use Damage Mechnics. Nuclear Engineering and Design, 80, 233-245.
https://doi.org/10.1016/0029-5493(84)90169-9

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133