基于机器视觉的曲面铸件的缺陷检测技术研究
Research on Surface of Casting Defect Detection Based on Machine Vision Technology

DOI: 10.12677/CSA.2020.101006, PP. 44-50

Keywords: 缺陷检测，立体视觉，曲面轮廓，机器视觉
Defect Detection, Stereo Vision, Curve Surface Contour, Machine Vision

Full-Text   Cite this paper   Add to My Lib

Abstract:

传统的工业生产制造，由于科学技术的限制仍然主要采用人工检测的方法去检测产品表面的缺陷，五金产业在抛光研磨制程后的表面研磨管均是由人工进行目检，主要原因为目前的大范围曲面轮廓检测还是以接触式为主，且国际大厂的曲面检或量测解决方案报价多较为昂贵。对铸件研磨过程中产生的动信号进行分析研究，系统把采集到的复杂振动信号转化成简单电信号，对信号进行EMD分析处理。随着研磨时间加长，研磨振动幅度越来越小。在相同实验条件下，该方法较傅里叶波形分析方法更加直观方便。
In traditional industrial manufacturing, defects on the product surface are detected using artificial detection methods due to technical constraints. The surface inspection of water hardware after the grinding process is carried out visually and manually because contact method is still the main method to detect surface contour and automatic inspection solutions available in the market for large-scale curved contour inspection are very costly. The complex vibration signal generated in the process of casting grinding was collected and transformed into electronica signal that was analyzed by EMD. With the increasing lapping time, the vibration amplitudes will become smaller. EMD is more effective and intuition than Fast Fourier Transform Algorithm with the same experiment conditions.

References

[1]	Oh, H., Kim, J. and Kim, J. (2017) Enhancement of Visual Comfort and Sense of Presence on Stereoscopic 3D Images. IEEE Transactions on Image Processing: A Publication of the IEEE Signal Processing Society, 26, 3789-3801.
[2]	Li, K., Y？ntem, A.？. and Deng, Y.B. (2017) Full Resolution Auto-Stereoscopic Mobile Display Based on Large Scale Uniform Switchable Liquid Crystal Micro-Lens Array. Optics Express, 25, 9654-9675. https://doi.org/10.1364/OE.25.009654
[3]	Cui, D.M., Wilson, T.D. and Rockhold, R.W. (2017) Evaluation of the Effectiveness of 3D Vascular Stereoscopic Models in Anatomy Instruction for First Year Medical Students. Anatomical Sciences Education, 10, 34-45. https://doi.org/10.1002/ase.1626
[4]	Lin, C.J. and Widyaningrum, R. (2018) The Effect of Parallax on Eye Fixa-tion Parameter in Projection-Based Stereoscopic Displays. Applied Ergonomics, 69, 10-16. https://doi.org/10.1016/j.apergo.2017.12.020
[5]	Khayamyan, S., Lundstr？m, T.S. and Gren, P. (2017) Transi-tional and Turbulent Flow in a Bed of Spheres as Measured with Stereoscopic Particle Image Velocimetry. Transport in Porous Media, 117, 45-67. https://doi.org/10.1007/s11242-017-0819-y
[6]	Huang, N.E., Shen, Z., Long, S.R., et al. (1998) The Empirical Mode Decomposition and the Hilbert Spectrum for Nonlinear and Non-Stationary Time Series Analysis. Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences, 454, 903-995. https://doi.org/10.1098/rspa.1998.0193
[7]	Hazimah, R.P., Hasan, Z. and Jafar, F.A. (2017) A Comparison of SSDXCOR and CC Matching Techniques for Vision Inspection System. Journal of Computational & Theoretical Na-noscience, 23, 5461-5465. https://doi.org/10.1166/asl.2017.7400
[8]	Petraglia, F.R., Campos, R. and Gomes, J.G.R.C. (2017) Pipeline Tracking and Event Classification for an Automatic Inspection Vision System. IEEE International Symposium on Cir-cuits and Systems, Baltimore, 28-31 May 2017, 28-31. https://doi.org/10.1109/ISCAS.2017.8050761
[9]	Muntean, D. and R？ulea, A.S. (2018) The Intangible Assets Advantages in the Machine Vision Inspection of Thermoplastic Materials. Acta Universitatis Cibiniensis Technical, 69, 136-142. https://doi.org/10.1515/aucts-2017-0017
[10]	Iglesias, C., Martínez, J. and Taboada, J. (2018) Automated Vision System for Quality Inspection of Slate Slabs. Computers in Industry, 99, 119-129. https://doi.org/10.1016/j.compind.2018.03.030
[11]	Tao, X., Zhang, Z.T. and Zhang, F. (2017) A Novel and Effec-tive Surface Flaw Inspection Instrument for Large-Aperture Optical Elements. International Journal of Automation and Computing, 64, 2530-2540. https://doi.org/10.1109/TIM.2015.2415092
[12]	Zhang, H., Li, X.L. and Zhong, H. (2018) Automated Machine Vision System for Liquid Particle Inspection of Pharmaceutical Injection. IEEE Transactions on Instrumentation & Measurement, 67, 1278-1297.

Full-Text