|
|
- 2017
甘油、水与压缩空气三流体喷雾雾化特性
|
Abstract:
摘要 气体与液体双流体喷雾的工业应用已较为成熟，三流体喷雾作为一种较新的喷雾方式，目前工业应用与相关研究均较少。针对一种三流体雾化喷嘴，搭建喷雾与测试实验台，利用高速摄像仪与相位多普勒粒子测试仪（PDPA）对三流体喷嘴甘油、水与压空雾化特性进行研究。探讨分析气液质量比（ALR）对液滴直径与速度的影响，以及直径与速度轴向与径向空间分布特性。研究发现当ALR范围为0.327~0.518时，液滴直径随ALR变化较小。液滴直径与速度空间分布极不均匀，喷嘴出口附近存在液滴直径随轴向距离增加而快速下降与液滴加速现象。此外，不同喷雾轴向距离下，中心部位的液滴比喷雾边缘更细小。
| [1] | Lefebvre A H, Wang X F, Martin C A. Spray characteristics of aerated-liquid pressure atomizers[J]. Journal of Propulsion and Power, 1988, 4(4):293-298. |
| [2] | Lund M T, Sojka P E, Lefebvre A H, et al. Effervescent atomization at low mass flow rates. Part I:The influence of surface tension[J]. Atomization and Sprays, 1993, 3(1):77-89. |
| [3] | Buckner H N, Sojka P E. Effervescent atomization of high-viscosity fluids. Part I:Newtonian liquids[J]. Atomization and Sprays, 1991, 1(3):239-252. |
| [4] | Zhou ZF, Chen B, Wang YS, et al. An experimental study on pulsed spray cooling with refrigerant R-404a in laser surgery[J]. Applied Thermal Engineering, 2012, 39(6):29-36. |
| [5] | 虞子云. 气流喷雾雾化性能研究[J]. 林产化学与工业, 1992, 12(2):113-119. |
| [6] | 邱康华,董毅宏. 三流体雾化器的液滴直径及雾锥特性[J]. 化学工程, 1994, 22(2):59-62. |
| [7] | Sovani S D, Sojka P E, Lefebvre A H. Effervescent atomization[J]. Progress in Energy and Combustion Science, 2001, 27(4):483-521. |
| [8] | Avulapati M M, Rayavarapu V R. Experimental studies on air-assisted impinging jet atomization[J]. International Journal of Multiphase Flow, 2013, 57(7):88-101. |
| [9] | Davanlou A,Lee J D,Basu S,et al. Effect of viscosity and surface tension on breakup and coalescence of bicomponent sprays[J]. Chemical Engineering Science, 2015, 131(7):243-255. |
| [10] | Vu H, Garcia-Valladares O, Aguilar G. Vapor/liquid phase interaction in flare flashing sprays used in dermatologic cooling[J]. International Journal of Heat and Mass Transfer, 2008, 51(23):5721-5731. |
| [11] | Zhou Z F, Wu W T, Chen B, et al. An experimental study on the spray and thermal characteristics of R134a two-phase flashing spray[J]. International Journal of Heat and Mass Transfer, 2012, 55(15):4460-4468. |
