|
|
- 2016
柴油机余热回收筒式温差发电器的结构优化
|
Abstract:
针对一款适用于大功率车用柴油机的筒式温差发电装置提出优化方案, 该方案基于对热端集热器、温差发电模块及柴油机的仿真模拟的综合评价, 包括Fluent对于温差发电器冷热端温度场、内部流场和背压的仿真, Matlab对于温差发电器发电计算, 以及GT-Power对于背压引起的柴油机功率损失计算．针对原结构中存在换热效果不理想的问题, 提出加装不同尺寸导流装置来强化换热, 可使整体性能大幅提升．本研究中, 当采用60 mm导流装置时, 系统净输出功率取得最大, 达到651.1 W, 较原系统436.5 W提高了49.2% ．
The simulation and optimization scheme of cylindrical thermoelectric generating system for exhaust waste heat recovery of a large power vehicle diesel engine was proposed. This scheme was based on the simulation of thermoelectric generator，hot-side collector and diesel engine. It consisted of the hot-cold side temperature field，inner flow field and exhaust back pressure of thermoelectric generating system calculated by the Fluent software，thermoelectric generator’s electric energy production calculated by Matlab，and the power loss caused by exhaust back pressure of diesel engine calculated by GT-Power. To solve the problem of low heat transfer efficiency in the original system，different sizes of guiding device were installed，which greatly enhanced the performance. It was found that the 60 mm guiding device has the largest net output power of 651.1 W，which increases by 49.2% compared to 436.5 W in the original system
| [1] | 张征, 曾美琴, 司广树. 温差发电技术及其在汽车发动机排气余热利用中的应用[J]. 能源技术, 2004, 25(3):120-123. |
| [2] | Zhang Zheng, Zeng Meiqin, Si Guangshu. Thermoelectric generation technology and its application in exhaust waste heat utilizing for automobile’s engine[J]. <i>Energy and Technology</i>, 2004, 25(3):120-123(in Chinese). |
| [3] | Bass J C, Elsner N B, Leavitt F A. Performance of the |
| [4] | 1 kW thermoelectric generator for diesel engines[C]// <i>AIP Conference Proceedings</i>. Philadelphia, USA, 1994:295. |
| [5] | Bass J C, Elsner N B. Current thermoelectric programs at Hi-Z technology[C]// <i>Inc Proc</i> 11<i>th International Conference on Thermoelectrics</i>. Arlington, USA, 1992:1-3. |
| [6] | Niu Z, Diao H, Yu S, et al. Investigation and design optimization of exhaust-based thermoelectric generator system for internal combustion engine[J]. <i>Energy Conversion and Management</i>, 2014, 85:85-101. |
| [7] | Guo Xun. Research on Integration Design of Automobile Waste Heat Thermoelectric Generation System and Engine Muffler[D]. Wuhan:Automobile Institute, Wuhan University of Technology, 2011(in Chinese). |
| [8] | Hsu C T, Huang G Y, Chu H S, et al, Experiments and simulations on low-temperature waste heat harvesting system by thermoelectric power generators[J]. <i>Applied Energy</i>, 2011, 88(4):1291-1297. |
| [9] | Shu Gequn, Jia Qi, Tian Hua, et al. Simulation and analysis of thermoelectric unicouple used for waste heat recovery from the exhaust of internal combustion engine [J]. <i>Journal of Tianjin University</i>:<i>Science and Technology</i>, 2014, 47(2):132-137(in Chinese). |
| [10] | 郭？？. 汽车排气废热温差发电系统与发动机消声器一体化设计研究[D]. 武汉:武汉理工大学汽车学院, 2011. |
| [11] | 舒歌群, 贾琦, 田华, 等. 内燃机排气余热回收温差电偶的模拟分析[J]. 天津大学学报:自然科学与工程技术版, 2014, 47(2):132-137. |
| [12] | Zhao Zhibo. Research of Working Fluids of Engine Exhaust Gas Waste Heat Recovery Based on Organic Rankine Cycle (ORC)[D]. Tianjin:School of Mechanical Engineering, Tianjin University, 2011(in Chinese). |
| [13] | La Grandeur J, Crane D, Hung S, et al. Automotive waste heat conversion to electric power using skutterudite, TAGS, PbTe and BiTe[C]// <i>International Conference on Thermoelectrics</i>. Vienna, Austria, 2006:343-348. |
| [14] | 赵智博. 内燃机废气余热利用有机朗肯循环工质的研究[D]. 天津:天津大学机械工程学院, 2011. |
