|
|
- 2016
复合材料螺栓连接预紧力松弛的温度-时间依存行为
|
Abstract:
针对碳纤维增强环氧基复合材料机械连接结构耐久性设计中的2个关键问题:黏弹性预紧力松弛的温度-时间依赖行为及其长期性能预测方法进行研究。建立了以蠕变全应变理论为基础的预紧力松弛预测模型。36 h的恒温耐久试验表明:初始预紧力越大,温度越高,连接件预紧力松弛速率越快;复合材料连接件的松弛速率远大于金属连接件;预紧力松弛主要表现为材料蠕变过程。对比短期试验结果表明:本模型能较好地实现对不同温度、预紧力和连接材料的松弛预测,为确立试验数据的外推方法提供了依据。 Two key problems in structural durability design for mechanically fastened carbon fiber reinforced epoxy composite joints:temperature-time dependent behavior for viscoelastic preload relaxation and prediction method for its long time performance were investigated. Preload relaxation prediction model was developed on basis of the creep total-strain theory. 36 h constant temperature durability tests show that the relaxation rate of preload for joints is faster with the greater initial preload and higher temperature; relaxation rate of composite joints is much greater than that of metallic joints; preload relaxation mainly behaves as the material creep process. Compared to the short-term test results, it shows that the model can well predict the relaxation for different temperatures, preloads and joint materials, which also provides a basis for extrapolation method of determining test data. 中央高校基本科研业务费专项资金(0220219105)
| [1] | 王志瑾, 姚卫星. 飞机结构设计[M]. 北京:国防工业出版社, 1970:1-10. WANG Z J, YAO W X. Aircraft structural design[M]. Beijing:National Defense Industry Press, 1970:1-10(in Chinese). |
| [2] | BICKFORD J. An introduction to the design and behavior of bolted joints, revised and expanded[M]. Los Angeles:CRC Press, 1995:1-20. |
| [3] | CHEN H S. The static and fatigue strength of bolted joints in composites with hygrothermal cycling[J]. Composite Structures, 2001, 52(3):295-306 |
| [4] | 裴瑞光, 张振, 肖毅, 等. 复合材料紧固件连接预紧力松弛行为[C]//中国力学大会——2013论文摘要集. 西安:西安交通大学, 2013:65. PEI R G, ZHANG Z, XIAO Y, et al. Preload relaxation behavior in fastened composite joints[C]//The Chinese Society of Theoretical and Applied Mechanics-2013 Abstract Collection. Xi'an:Xi'an Jiaotong University, 2013:65(in Chinese). |
| [5] | 张振, 肖毅, 刘彦清, 等. 基于振动疲劳试验的复合材料螺栓连接预紧力松弛特性[J]. 复合材料学报, 2016, 33(1):163-173. ZHANG Z, XIAO Y, LIU Y Q, et al. Preload relaxation characteristics in bolted composite joints based on vibration fatigue test[J]. Acta Materiae Compositae Sinica, 2016, 33(1):163-173(in Chinese). |
| [6] | ROUSSEAU C Q, IARVE E V. Durability of structural ioints. In long-term durability of polymeric matrix composites[M]. Berlin:Springer, 2012:483-512. |
| [7] | 谢鸣九. 复合材料连接[M]. 上海:上海交通大学出版社, 2011:3-10. XIE M J. Joints for composites materials[M]. Shanghai:Shanghai Jiao Tong University Press, 2011:3-10(in Chinese). |
| [8] | 刘德安, 刘隽. FRP结构螺栓接点的预紧力与应力松弛[J]. 复合材料学报, 1999, 16(4):90-93. LIU D A, LIU J. Pretightening force and stress relaxation of FRP construction bolt joint[J]. Acta Materiae Compositae Sinica, 1999, 16(4):90-93(in Chinese). |
| [9] | CACCESE V, BERUBE K A, FERNANDEZ M. Influence of stress relaxation on clamp-up force in hybrid composite-to-metal bolted joints[J]. Composite Structures, 2009, 89(2):285-293. |
| [10] | THOPPUL S D, GIBSON R F, IBRAHIM R A. Phenomenological modeling and numerical simulation of relaxation in bolted composite joints[J]. Journal of Composite Materials, 2008, 42(17):1709-1729. |
| [11] | 平修二. 理論·設計金属材料の高温強度[M]. 仙台:养賢堂, 1983:245-360(in Japanese). |
| [12] | SHIVAKUMAR K N, CREWS J H. Bolt clamp-up relaxation in a graphite/epoxy laminate:NASA TM-83268[R]. Virginia:Langley Research Center, 1982. |
| [13] | SCHIMITT R R. Viscoelastic relaxation in bolted thermoplastic composite joints[D]. Lincoln:University of Nebrska, 1984. |
| [14] | 中国国家标准化委员管理会. 非金属垫片材料分类体系及试验方法第五部分:垫片材料蠕变松弛率试验方法:GB/T 20671.5-2006[S]. 北京:中国标准出版社, 2006. Standardization Administration of the People's Republic of China. Classification system and test methods for nonmetallic gasket materials-Part 5:Standard test method for creep relaxation of gasket materials:GB/T 20671.5-2006[S]. Beijing:Stadards Press of China, 2006(in Chinese). |
| [15] | TOBOLOVá Z, A？ ADEK J. An interpretation of steady state creep[J]. Philosophical Magazine, 1972, 26(6):1419-1428. |
| [16] | BRINSON H F, BRINSON L C. Polymer engineering science and viscoelasticity-An introduction[M]. New York:Springer, 2008:156-201. |
| [17] | XU Y J, WU Q, LEI Y, et al. Creep behavior of bagasse fiber reinforced polymer composites[J]. Bioresource Technology, 2010, 101(9):3280-3286. |
| [18] | 王宝珍, 周相荣, 胡时胜. 高应变率下橡胶的时温等效关系及力学形态[J]. 高分子材料科学与工程, 2008, 24(8):5-8. WANG B Z, ZHOU X R, HU S S. Dynamic mechanical behavior and rate-temperature equivalence of rubber[J]. Polymer Materials Science and Engineering, 2008, 24(8):5-8(in Chinese) |
| [19] | HART-SMITH L J. Design and analysis of bolted and riveted joints in fibrous composite structures[M]. Berlin:Springer Netherlands, 2003:211-219. |
| [20] | PEI R G, CHEN H L, XIAO Y. Viscoelastic relaxation in bolted composite joints(part I:thermal effects)[C]//9th Asian-Australasian Conference on Composite Materials(ACCM-9). Nanjing:Nanjing University of Aeronautics and Astronautics, 2014:337-343. |
| [21] | 陈豪麟. 复合材料螺栓连接预紧力松弛的温度效应[D]. 上海:同济大学, 2013. CHEN H L. Thermal effect of clamp-up relaxation in bolted composite joints[D]. Shanghai:Tongji University, 2013(in Chinese). |
| [22] | FINDLEY W N. Creep and relation of nonlinear viscoelastic materials[M]. New York:Dover Publications, 1989:190-212. |
| [23] | THOPPUL S D, FINEGAN J, GIBSON R F. Mechanics of mechanically fastened joints in polymer-matrix composite structures-A review[J]. Composites Science and Technology, 2009, 69(3):301-329. |
| [24] | 张俊善. 材料的高温变形与断裂[M]. 北京:科学出版社, 2007:4-11. ZHANG J S. High temperature deformation and fracture of materials[M]. Beijing:Science Press, 2007:4-11(in Chinese). |
