|
|
- 2016
C/C坯体密度对2D Cf/SiC复合材料结构和性能的影响
|
Abstract:
通过理论计算，探究Cf/SiC复合材料密度与C/C坯体密度的相关性；而后采用碳纤维布叠层制作2D C/C坯体，经先驱体浸渍裂解工艺增密，制得密度分别为0.98、1.06、1.12 g/cm3的C/C坯体，通过液相渗硅法反应合成2D Cf/SiC复合材料，探究C/C坯体密度对其结构和性能的影响。与理论计算结果来对比。研究结果表明：试验结果与理论数学计算结果基本一致。随着C/C坯体密度的增加，Cf/SiC复合材料的密度出现先上升后下降的趋势，当C/C坯体密度大于0.98 g/cm3后，复合材料的弯曲强度随着C/C坯体密度的增加而降低，C/C坯体密度为0.98 g/cm3时，2D Cf/SiC复合材料结构和性能较优。 Relationship of densities between Cf/SiC composites and C/C preforms was studied by theoretical calculation. And 2D Cf/SiC composites were prepared from three kinds of C/C preforms with densities of 0.98, 1.06, 1.12 g/cm3, which were prepared by repeatedly overlapping the layers of carbon cloths and precursor infiltration pyrolysis, by liquid silicon infiltration. The effects of densities of C/C preforms on structure and property of composites were study. The results were compared with theoretical calculation results. The research results show that the test results are basically consistent with the theoretical mathematical results. The density of Cf/SiC composites increases first and then decreases with the increase of the C/C preforms density. And when the density of C/C preform is greater than 0.98 g/cm3, the flexural strength of composites decreases with the increase of C/C preforms density. The composites have a better structure and property, while the density of C/C preforms is 0.98 g/cm3.
| [1] | 王继平, 金志浩, 钱军民, 等. 反应熔渗法制备C/C-SiC复合材料及其反应机理和动力学的研究进展[J]. 硅酸盐学报, 2005, 33(9): 1120-1126. WANG J P, JIN Z H, QIAN J M, et al. Research progress on mechanism and kinetics of C/C-SiC composites prepared by reactive melt infiltration[J]. Journal of the Chinese Ceramic Society, 2005, 33(9): 1120-1126(in Chinese). |
| [2] | 黄海明, 杜善义, 吴林志, 等. C/C复合材料烧蚀性能分析[J]. 复合材料学报, 2001, 18(3): 76-80. HUANG H M, DU S Y, WU L Z, et al. Analysis of the ablation of C/C composites[J]. Acta Materiae Compositae Sinica, 2001, 18(3): 76-80(in Chinese). |
| [3] | 迟伟东, 沈曾民, 张学军, 等. 由炭布制备C/C复合材料工艺及性能的研究[J]. 新型炭材料, 2001, 16(3): 55-57. CHI W D, SHEN Z M, ZHANG X J, et al. Study of the manufacture and properties of C/C composites from carbon cloth[J]. New Carbon Materials, 2001, 16(3): 55-57(in Chinese). |
| [4] | 王静, 曹英斌, 刘荣军, 等. C/C-SiC复合材料的反应烧结法制备及应用进展[J]. 材料导报, 2013, 27(5): 29-33. WANG J, CAO Y B, LIU R J, et al. Advances in C/C-SiC composites: Preparation by reaction bonding technique and applications[J]. Materials Review, 2013, 27(5): 29-33(in Chinese). |
| [5] | PATEL M, SAURABH K, PRASAD V V B, et al. High temperature C/C-SiC composite by liquid silicon infiltration: A literature review[J]. Bulletin of Materials Science, 2012, 35(1): 63-73. |
| [6] | KRENKEL W, BERNDT F. C/C-SiC composites for space applications and advanced friction systems[J]. Materials Science and Engineering: A, 2005, 412(1-2): 177-181. |
| [7] | 谢建伟. C/SiC复合材料的结构与力学性能[D]. 长沙: 中南大学, 2007. XIE J W. The structure and mechanical properties of C/SiC composites[D]. Changsha: Central South University, 2007(in Chinese). |
| [8] | 马青松, 刘海韬, 潘余, 等. C/SiC复合材料在超燃冲压发动机中的应用研究进展[J]. 无机材料学报, 2013, 28(3): 248-255. MA Q S, LIU H T, PAN Y, et al. Research progress on the application of C/SiC composites in scramjet[J]. Journal of Inorganic Materials, 2013, 28(3): 248-255(in Chinese). |
| [9] | ZHOU Q, DONG S M, DING Y S, et al. Three-dimensional carbon fiber-reinforced silicon carbide matrix composites by vapor silicon infiltration[J]. Ceramics International, 2009, 35(6): 2161-2169. |
| [10] | 何柏林, 孙佳. 碳纤维增强碳化硅陶瓷基复合材料的研究进展及应用[J]. 硅酸盐通报, 2009, 28(6): 1197-1202. HE B L, SUN J. Progress and application of carbon fibers reinforced silicon carbide ceramic matrix composites[J]. Bulletin of the Chinese Ceramic Society, 2009, 28(6): 1197-1202(in Chinese). |
| [11] | YANG X, HU H F, ZHANG Y D, et al. Thermal shock properties of 3D-C/SiC composites prepared via polymer infiltration pyrolysis (PIP)[J]. Ceramics International, 2014, 40(7): 9087-9094. |
| [12] | WANG H L, ZHOU X G, YU J S, et al. Microstructure, mechanical properties and reaction mechanism of KD-1 SiCf/SiC composites fabricated by chemical vapor infiltration and vapor silicon infiltration[J]. Materials Science and Engineering: A, 2011, 528(6): 2441-2445. |
| [13] | LI G D, ZHANG C R, HU H F, et al. Preparation and mechanical properties of C/SiC nuts and bolts[J]. Materials Science and Engineering: A, 2012, 547: 1-5. |
| [14] | 张红波, 尹健, 熊翔. C/C复合材料烧蚀性能的研究进展[J]. 材料导报, 2005, 19(7): 97-99. ZHANG H B, YIN J, XIONG X. Research and development of the ablation performance of C/C composites[J]. Materials Review, 2005, 19(7): 97-99(in Chinese). |
| [15] | 闫联生, 崔红, 李克智, 等. 炭纤维针刺预制体增强C/SiC复合材料的制备与性能研究[J]. 无机材料学报, 2008, 23(2): 223-228. YAN L S, CUI H, LI K Z, et al. Preparation and properties of carbon fiber needling preform reinforced silicon carbide composites[J]. Journal of Inorganic Materials, 2008, 23(2): 223-228(in Chinese). |
| [16] | 彭可, 葛毅成, 杨琳, 等. C/C坯体密度对熔融渗硅法制备的C/C-SiC复合材料摩擦行为的影响[J]. 粉末冶金材料科学与工程, 2010, 15(3): 252-257. PENG K, GE Y C, YANG L, et al. Effect of C/C preforms density on sliding friction behavior of C/C-SiC composites fabricated by molten silicon infiltration method[J]. Materials Science and Engineering of Powder Metallurgy, 2010, 15(3): 252-257(in Chinese). |
