|
|
- 2018
603环氧树脂体系固化动力学模型的建立与验证
|
Abstract:
| [1] | JING X, LIU Y, LIU Y, et al. Toughening-modified epoxy-amine system:Cure kinetics, mechanical behavior, and shape memory performances[J]. Journal of Applied Polymer Science, 2014, 131(19):5829-5836. |
| [2] | KASEMSIRI P, NERAMITTAGAPONG A, CHINDAPRASIRT P. Curing kinetic, thermal and adhesive properties of epoxy resin cured with cashew nut shell liquid[J]. Thermochimica Acta, 2015, 600(4):20-27. |
| [3] | JUBSILP C, PUNSON K, TAKEICHI T, et al. Curing kinetics of benzoxazine-epoxy copolymer investigated by non-isothermal differential scanning calorimetry[J]. Polymer Degradation & Stability, 2010, 95(6):918-924. |
| [4] | FERDOSIAN F, YUAN Z, ANDERSON M, et al. Sustainable lignin-based epoxy resins cured with aromatic and aliphatic amine curing agents:Curing kinetics and thermal properties[J]. Thermochimica Acta, 2015, 618:48-55. |
| [5] | 陈艳雄. 环氧树脂柔性固化剂的合成及其固化反应动力学研究[D]. 成都:四川大学, 2007. CHEN Y X. Synthesis and curing kinetics of epoxy resin tough curing agent[D]. Chengdu:Sichuan University, 2007(in Chinese). |
| [6] | 吴唯, 刘明昌, 陈玉, 等. E-51环氧树脂固化反应中动力学转变[J]. 复合材料学报, 2011, 28(4):1-6. WU W, LIU M C, CHEN Y, et al. Shifting of the curing kinetics of E-51 epoxy resin[J]. Acta Materiae Compositae Sinica, 2011, 28(4):1-6(in Chinese). |
| [7] | FERDOSIAN F, YUAN Z, ANDERSON M, et al. Sustainable lignin-based epoxy resins cured with aromatic and aliphatic amine curing agents:Curing kinetics and thermal properties[J]. Thermochimica Acta, 2015, 618:48-55. |
| [8] | GANG L, HUANG Z, PENG L, et al. Curing kinetics and mechanisms of polysulfone nanofibrous membranes toughened epoxy/amine systems using isothermal DSC and NIR[J]. Thermochimica Acta, 2010, 497(1-2):27-34. |
| [9] | GARSCHKE C, PARLEVLIET P P, WEIMER C, et al. Cure kinetics and viscosity modelling of a high-performance epoxy resin film[J]. Polymer Testing, 2013, 32(1):150-157. |
| [10] | SCHAWE J E K. A description of chemical and diffusion control in isothermal kinetics of cure kinetics[J]. Thermochimica Acta, 2002, 388(1-2):299-312. |
| [11] | XIE H, LIU B, SUN Q, et al. Cure kinetic study of carbon nanofibers/epoxy composites by isothermal DSC[J]. Journal of Applied Polymer Science, 2005, 96(2):329-335. |
| [12] | 王遵, 邢素丽, 曾竟成, 等. 热固性树脂固化反应动力学模型研究进展[J]. 高分子材料科学与工程, 2007, 23(4):11-14. WANG Z, XING S L, ZENG J C, et al. Cure kinetic models of thermosetting resins and the state of the art[J]. Polymer Materials Science and Engineering. 2007, 23(4):11-14(in Chinese). |
| [13] | KAMAL M R, SOUROUR S. Kinetics and thermal characterization of thermoset cure[J]. Polymer Engineering & Science, 1973, 13(1):59-64. |
| [14] | NICOLAS S, SERGEY V, ALICE M, et al. A study of epoxy-amine cure kinetics by combining iso-conversional analysis with temperature modulated DSC and dynamic rheometry[J]. Macromolecular Chemistry & Physics, 2003, 204(15):1815-1821. |
| [15] | 甘丽, 孙志杰, 顾轶卓, 等. 升温与等温法非模型动力学研究环氧树脂固化反应[J]. 高分子学报, 2010, 1(8):1016-1022. GAN L, SUN Z J, GU Y Z, et al. Epoxy resin curing reaction studied by dynamic and isothermal model free kinetics[J]. Acta Polymerica Sinica, 2010, 1(8):1016-1022(in Chinese). |
| [16] | 杨帆. 复合材料树脂固化过程的数值模拟[D]. 哈尔滨:哈尔滨工业大学, 2006. YANG F. Simulation on the cure process of resin in composites[D]. Harbin:Harbin Institute of Technology, 2006(in Chinese). |
| [17] | 丁江平, 廖栋, 范欣愉. 非等温DSC法研究复合材料用环氧树脂的固化反应[J]. 材料导报, 2011, 25(14):139-143. DING J P, LIAO D, FAN X Y. Study on curing reaction of epoxy used in composites by non-isothermal DSC method[J]. Materials Review, 2011, 25(14):139-143(in Chinese). |
| [18] | LEE J Y, CHOI H K, SHIM M J, et al. Kinetic studies of an epoxy cure reaction by isothermal DSC analysis[J]. Thermochimica Acta, 2000, 343(1):111-117. |
| [19] | 邸喜强, 翁睿, 姜艳琼. 环氧树脂含硅固化剂的固化动力学研究[J]. 武汉理工大学学报, 2012, 34(11):18-21. QIU X Q, WENG R, JIANG Y Q. Study on curing kinetics of silicon-containing epoxy curing agent[J]. Journal of Wuhan University of Technology, 2012, 34(11):18-21(in Chinese). |
| [20] | HAYATY M, BEHESHTY M H, ESFANDEH M. Cure kinetics of a glass/epoxy prepreg by dynamic differential scanning calorimetry[J]. Journal of Applied Polymer Science, 2011, 120(1):62-69. |
| [21] | 李雪芹, 刘刚, 张子龙, 等. 基于FBG应变监测的环氧树脂固化收缩及工艺参数优化[J]. 复合材料学报, 2016, 33(10):2151-2157. LI X Q, LIU G, ZHANG Z L, et al. Curing shrinkage and process parameter optimization of epoxy resin based on FBG strain monitoring[J]. Acta Materiae Compositae Sinica, 2016, 33(10):2151-2157(in Chinese). |
| [22] | 贺继林, 王特, 潘若阳, 等. 基于因次分析方法的树脂基复合材料等温固化均匀性分析[J]. 复合材料学报, 2016, 33(1):71-76. HE J L, WANG T, PAN R Y, et al. Analysis of isothermal curing uniformity of resin matrix composites based on dimensional analysis method[J]. Acta Materiae Compositae Sinica, 2016, 33(1):71-76(in Chinese). |
| [23] | 李伟东, 张金栋, 刘刚, 等. 高韧性双马来酰亚胺树脂的固化反应动力学和TTT图[J]. 复合材料学报, 2016, 33(7):1475-1483. LI W D, ZHANG J D, LIU G, et al. Curing reaction kinetics and TTT diagram of high toughness bismaleimide resin[J]. Acta Materiae Compositae Sinica, 2016, 33(7):1475-1483(in Chinese). |
| [24] | CHU F, MCKENNA T, LU S. Curing kinetics of an acrylic resin/epoxy resin system using dynamic scanning calorimetry[J]. European Polymer Journal, 1997, 33(6):837-840. |
| [25] | 张明, 安学锋, 唐邦铭, 等. 高性能双组份环氧树脂固化动力学研究和TTT图绘制[J]. 复合材料学报, 2006, 23(1):17-25. ZHANG M, AN X F, TANG B M, et al. Cure kinetics and TTT-diagram of a bicomponent high performance epoxy resin for advanced composites[J]. Acta Materiae Compositae Sinica, 2006, 23(1):17-25(in Chinese). |
| [26] | TRIPATHI G, SRIVASTAVA D. Cure kinetics of ternary blends of epoxy resins studied by non-isothermal DSC data[J]. Journal of Applied Polymer Science, 2009, 112(5):3119-3126. |
| [27] | 曾秀妮, 段跃新. 840S环氧树脂体系固化反应特性[J]. 复合材料学报, 2007, 24(3):100-104. ZENG X N, DUAN Y X. Curing reaction characteristics of 840S epoxy resin[J]. Acta Materiae Compositae Sinica, 2007, 24(3):100-104(in Chinese). |
| [28] | FAN M, LIU J, LI X, et al. Curing behaviors and properties of an extrinsic toughened epoxy/anhydride system and an intrinsic toughened epoxy/anhydride system[J]. Thermochimica Acta, 2013, 554(4):39-47. |
| [29] | 于佳, 张博明, 王殿富, 等. 典型双马来酰亚胺树脂固化动力学模型的研究[J]. 复合材料学报, 2004, 21(1):78-83. YU J, ZHANG B M, WANG D F, et, al. Study of cure kinetic model of typical bismeleimide[J]. Acta Materiae Compositae Sinica, 2004, 21(1):78-83(in Chinese). |
| [30] | KISSINGER H E. Reaction kinetics in differential thermal analysis[J]. Analytical Chemistry, 1957, 29(11):1702-1706. |
