芳纶浆粕纤维增强均质气压砂轮特性
Characteristic of AFRP pneumatic wheel

DOI: 10.13801/j.cnki.fhclxb.20170105.002

Keywords: 气压砂轮,芳纶浆粕纤维增强,弹性模量,加工,划痕
pneumatic wheel,aramid fiber reinforced,elastic modulus,machining,scratch

Full-Text   Cite this paper   Add to My Lib

Abstract:

References

[1]	计时鸣, 曾晰, 金明生, 等. 基于修正Preston方程的气压砂轮加工特性[J]. 浙江大学学报: 工学版, 2013, 47(7): 1299-1306. JI Shiming, ZENG Xi, JIN Mingsheng, et al. Processing characteristics of pneumatic wheel based on modified Preston equation[J]. Journal of Zhejiang University: Engineering Science, 2013, 47(7): 1299-1306 (in Chinese).
[2]	ZENG X, JI S M, JIN M S, et al. Research on dynamic characteristic of softness consolidation abrasives in machining process[J] International Journal of Advanced Manufacturing Technology, 2016, 82(5-8); 1115-1125.
[3]	黄奇伟, 章明, 曲巍崴, 等. 机器人制孔姿态优化与光顺[J]. 浙江大学学报: 工学版, 2015, 49(12): 2261-2275. HUANG Qiwei, ZHANG Ming, QU Weiwei, et al. Posture optimization and smoothness for robot drilling[J]. Journal of Zhejiang University: Engineering Science, 2015, 49(12): 2261-2275 (in Chinese).
[4]	DANDEKAR R, CHINMAYA Y, SHIN C. Multi-scale modeling to predict sub-surface damage applied to laser-assisted machining of a particulate reinforced metal matrix composite[J]. Journal of Materials Processing Technology, 2013, 213: 153-160.
[5]	ZHANG Q, ANYAKJN M, ZHUK R, et al. Application of regression designs for simulation of laser cladding[J]. Physics Procedia, 2012, 39: 92-97.
[6]	朱德举, 张晓彤, 张怀安. 动态拉伸载荷下应变率和温度对Kevlar49芳纶纤维布增强环氧树脂复合材料力学性能的影响[J]. 复合材料学报, 2016, 33(3): 459-468. ZHU Deju, ZHANG Xiaotong, ZHANG Huaian. Effects of strain rate and temperature on mechanical properties of Kevlar 49 aramid fabric reinforced epoxy polymers under dynamic tensile loading[J]. Acta Materiae Compositae Sinica, 2016, 33(3): 459-468 (in Chinese).
[7]	诸葛萍, 丁勇, 卢彭真, 等. 循环荷载作用对CFRP筋力学性能的影响[J]. 复合材料学报, 2014, 31(1): 248-253. ZHU Geping, DING Yong, LU Pengzhen, et al. Effect of cyclic loading on the mechanical properties of CFRP tendons[J]. Acta Materiae Compositae Sinica, 2014, 31(1): 248-253 (in Chinese).
[8]	计时鸣, 郑孟翔, 金明生, 等. Lyocell短纤维增强气压砂轮基体的力学性能[J]. 复合材料学报, 2014, 31(5): 1321-1329. JI Shiming, ZHENG Mengxiang, JIN Mingsheng, et al. Mechanical performance of Lyocell short fiber reinforced pneumatic wheel substrate[J]. Acta Materiae Compositae Sinica, 2014, 31(5): 1321-1329 (in Chinese).
[9]	NIELSEN L E. Generalized equation for the elastic modulus of composite materials[J]. Journal of Applied Physics, 1970, 41(11): 4626-4627.
[10]	ZHANG L Q. Study on the theoy of strength of short fiber/rubber composites I prediction of longitudinal tensile strength[J]. Acta Materiae Compositae Sinica, 1998, 15(4): 89.
[11]	BLUMENTRITT B F, VU B T, COOPER S L. The mechanical properties of oriented diseontinuous fiber-reinforced thermoplastics[J]. Polymer Engineering and Science, 1974, 14(9): 633-640.
[12]	WEBER M E, KAMAL M R. Mechanical and microscopic investigation of whisker-reinforced silicone rubber[J]. Polymer Composites, 2004, 13(2): 133-145.
[13]	TORKAMANY M J, SABBAGHZADEH J, HAMEDI M J. Effect of laser welding mode on the microstructure and mechanical performance of dissimilar laser spot welds between low carbon and austenitic stainless steels[J]. Materials & Design, 2012, 34: 666-672.
[14]	ZENG X, JI S M, TAN D P, et al. Softness consolidation abrasives material removal characteristic oriented to laser hardening surface[J]. International Journal of Advanced Manufacturing Technology, 2013, 69: 2323-2332.
[15]	宋剑锋, 姚英学, 谢大纲, 等. 气囊抛光工艺参数的正交实验分析[J]. 光学技术, 2009, 35(2): 315-318. SONG Jianfeng, YAO Yingxue, XIE Dagang, et al. Orthogonal experiment and analysis on polishing parameters of bonnet polishing[J]. Optical Technique, 2009, 35(2): 315-318 (in Chinese).
[16]	CHEUNG C F, KONG L B, HO L T, et al. Modelling and simulation of structure surface generation using computer controlled ultra-precision polishing[J]. Precision Engineering, 2011, 35; 574-590.
[17]	龚金成, 谢大纲, 宋剑锋, 等. 气囊抛光曲面光学零件工艺参数对抛光区特征影响的研究[J]. 燕山大学学报, 2008, 32(3): 197-200. GONG Jincheng, XIE Dagang, SONG Jianfeng, et al. Study on influences of processing parameters on polishing spot for curved optical work-piece in bonnet polishing[J]. Journal of Yanshan University, 2008, 32(3): 197-200 (in Chinese).
[18]	计时鸣, 曾晰, 金明生, 等. 软固结磨粒群加工方法及材料去除特性的分析[J]. 机械工程学报, 2013, 49(5): 173-181. JI Shiming, ZENG Xi, JIN Mingsheng, et al. New finishing method of softness consolidation abrasives and material removal characteristic analysis[J]. Journal of Mechanical Engineering, 2013, 49(5): 173-181 (in Chinese).
[19]	ZENG X, JI S M, JIN M S, et al. Investigation on machining characteristic of pneumatic wheel based on softness consolidation abrasives[J]. International Journal of Precision Engineering and Manufacturing, 2014, 1: 2031-2039.
[20]	朱德举, 欧云福. 标距和应变率对Kevlar49单束拉伸力学性能的影响[J]. 复合材料学报, 2015, 33(2): 225-233. ZHU Deju, OU Yunfu. Effects of gauge length and strain rate on tensile mechanical properties of Kevlar 49 single yarn[J]. Acta Materiae Compositae Sinica, 2015, 33(2): 225-233 (in Chinese).

Full-Text