|
|
- 2017
纤维增强树脂基复合材料防弹性能影响因素及破坏机制
|
Abstract:
| [1] | LONG H N, SHANNON R, STEPHEN J C, et al. The effect of target thickness on the ballistic performance of ultra high molecular weight polyethylene composite[J]. International Journal of Impact Engineering, 2015, 75:174-183. |
| [2] | TUAN L C, CUONG H M, ABDELLATIF I. A numerical investigation of the influence of yarn mechanical and physical properties on the ballistic impact behavior of a Kevlar KM2 woven fabric[J]. Composites Part B:Engineering, 2016, 95:144-154. |
| [3] | LI Z J, SUN B Z, GU B H. FEM simulation of 3D angle-interlock woven composite under ballistic impact from unit cell approach[J]. Computational Materials Science, 2010, 49(1):171-183. |
| [4] | HA-MINH C, IMAD A, BOUSSU F, et al. Experimental and numerical investigation of a 3D woven fabric subjected to a ballistic impact[J]. International Journal of Impact Engineering, 2016, 88:91-101. |
| [5] | 中国国家标准化管理委员会. 化学纤维长丝线密度试验方法:GB/T 14343-2008[S]. 北京:中国标准出版社, 2009. Standardization Administration of the People's Republic of China. Testing method for linear density of man-made filament yarns:GB/T 14343-2008[S]. Beijing:China Standards Press, 2009(in Chinese). |
| [6] | 中国国家标准化管理委员会.高强化纤长丝拉伸性能试验方法:GB/T 19975-2005[S]. 北京:中国标准出版社, 2006. Standardization Administration of the People's Republic of China. Test method of tensile properties for high tenacity filament yarn:GB/T 19975-2005[S]. Beijing:China Standards Press, 2006(in Chinese). |
| [7] | 中华人民共和国公安部. 防弹材料及产品V50试验方法:GA 950-2011[S]. 北京:中国标准出版社, 2011. Ministry of Public Security of the People's Republic of China. V50 test method for ballistic materials and products:GA 950-2011[S]. Beijing:China Standards Press, 2011(in Chinese). |
| [8] | 陈晓, 周宏. 叠层靶板弹击实验及弹道侵彻机理的数值模拟研究[J]. 爆炸与冲击, 2003, 23(6):509-515. CHEN X, ZHOU H. Numerical simulation of ballistic penetration of bulletproof laminated composite panels[J]. Expplosion and Shock Waves, 2003, 23(6):509-515(in Chinese). |
| [9] | 陆甲明. 防护复合材料用树脂基体的研究[D]. 上海:上海交通大学, 2009. LU J M. Study on resins in protective fiber composites[D]. Shanghai:Shanghai Jiao Tong University, 2009(in Chinese). |
| [10] | 丁丽娟, 程杞元. 数值计算方法[M]. 北京:北京理工大学出版社, 2008:148-149. DING L J, CHEN Q Y. Numerical calculation method[M]. Beijing:Beijing Institute of Technology Press, 2008:148-149(in Chinese). |
| [11] | 马晓青, 韩峰. 高速碰撞动力学[M]. 北京:国防工业出版社, 1998:5-9. MA X Q, HAN F. High speed impact dynamics[M]. Beijing:National Defense Industry Press, 1998:5-9(in Chinese). |
| [12] | 孙晋良, 吕伟元. 纤维新材料[M]. 上海:上海大学出版社, 2007:76-77. SUN J L, LV W Y. New fiber material[M]. Shanghai:Shanghai University Press, 2007:76-77(in Chinese). |
| [13] | ZHANG D T, SUN Y, CHEN L, et al. Influence of fabric structure and thickness on the ballistic impact behavior of Ultrahigh molecular weight polyethylene composite laminate[J]. Materials and Design, 2014, 54:315-322. |
| [14] | KARTHIKEYAN K, KAZEMAHVAZI S, RUSSELL B P. Optimal fibre architecture of soft-matrix ballistic laminates[J]. International Journal of Impact Engineering, 2016, 88:227-237. |
| [15] | 肖露. 混杂热固性树脂基防弹复合材料的制备及侵彻机理研究[D]. 杭州:浙江理工大学, 2013. XIAO L. A Study on the preparation and ballistic penetration properties of hybrided thermosetting resin bulletproof composite[D]. Hangzhou:Zhejiang Sci-Tech University, 2013(in Chinese). |
| [16] | ASWANI K B, VIKRANT V C, SUHAIL A, et al. Ballistic impact response of Kevlar reinforced thermoplastic composites armors[J]. International Journal of Impact Engineering, 2016, 89:1-13. |
| [17] | REDDY P R S, REDDY T S, MADHU V, et al. Behavior of E-glass composite laminates under ballistic impact[J]. Materials and Design, 2015, 84:79-86. |
| [18] | 陈长海, 朱锡, 王俊森, 等. 高速钝头弹侵彻中厚度高强聚乙烯纤维增强塑料层合板的机制[J]. 复合材料学报, 2013, 30(5):226-235. CHENG C H, ZHU X, WANG J S, et al. Mechanism of high-velocity blunt-nosed projectiles penetrating moderating thick UHMWPE fiber reinforced plastic laminate[J]. Acta Materiae Compositae Sinica, 2013, 30(5):226-235(in Chinese). |
| [19] | RAO M P, DUAN Y, KEEFE M, et al. Modeling the effects of yarn material properties and friction on the ballistic impact of a plain-weave fabric[J]. Composite Structures, 2009, 89(4):556-566. |
| [20] | 张华鹏. 防弹材料冲击破坏机理及其纤维的衰减规律[D]. 上海:东华大学, 2002. ZHANG H P. Failure mechanical of ballistic resistant material and decay of its fibers[D]. Shanghai:Donghua University, 2002(in Chinese). |
| [21] | 孔春凤, 田伟, 翁浦莹, 等. 高性能纤维层叠复合材料的抗冲击性能研究[J]. 浙江理工大学学报(自然科学版), 2016, 35(3):367-371. KONG C F, TIAN W, WENG P Y, et al. Impact resistance of high-performance fiber laminated composite materials[J]. Journal of Zhejiang Sci-Tech University (Natural Sciences), 2016, 35(3):367-371(in Chinese). |
| [22] | 顾伯洪, 徐静怡. 三维编织复合材料弹道侵彻准细观层次有限元计算[J]. 复合材料学报, 2004, 21(3):84-90. GU B H, XU J Y. Finite element calculation of a 3-D braided composite under ballistic penetration at quasi-microstructure hierarchy[J]. Acta Materiae Compositae Sinica, 2004, 21(3):84-90(in Chinese). |
| [23] | LIU S J, WANG J, WANG Y P, et al. Improving the ballistic performance of ultra high molecular weight polyethylene fiber reinforced composites using conch particles[J]. Materials and Design, 2010, 31(4):1711-1715. |
| [24] | 陈磊, 徐志伟, 李嘉禄, 等. 防弹复合材料结构及其防弹机理[J]. 材料工程, 2010(11):94-100. CHEN L, XU Z W, LI J L, et al. Structure and bullet-proof mechanism of ballistic composites[J]. Journal of Materials Engineering, 2010(11):94-100(in Chinese). |
| [25] | AFSHARI M, CHEN P, KOTEK R, et al. Relationship between tensile properties and ballistic performance of poly(ethylene naphthalate) woven and nonwoven fabrics[J]. Journal of Applied Polymer Science, 2012, 125(3):2271-2280. |
| [26] | 王红红. 芳纶Ⅲ纤维的结构与性能研究[D]. 西安:西安工程大学, 2015. WANG H H. Study on structures and properties of Aramid fiber Ⅲ[D]. Xi'an:Xi'an Polytechnic University, 2015(in Chinese). |
| [27] | 梅志远, 朱锡, 张立军. FRC层合板抗高速冲击机理研究[J]. 复合材料学报, 2006, 23(2):143-149. MEI Z Y, ZHU X, ZHANG Lijun. Ballistic protective mechanism of FRC laminates[J]. Acta Materiae Compositae Sinica, 2006, 23(2):143-149(in Chinese). |
