放电等离子烧结WC/Fe复合材料摩擦磨损性能
Tribology characteristics of WC/Fe composites by spark plasma sintering

DOI: 10.13801/j.cnki.fhclxb.20170302.007

Keywords: 放电等离子烧结,WC,WC/Fe复合材料,微观组织,氧化磨损,磨粒磨损
spark plasma sintering,WC,WC/Fe composites,microstructure,oxidation wear,abrasive wear

Full-Text   Cite this paper   Add to My Lib

Abstract:

References

[1]	LIBARDI S, ZADRA M, CASARI F, et al. Mechanical properties of nanostructured and ultrafine-grained iron alloys produced by spark plasma sintering of ball milled powders[J]. Materials Science and Engineering A, 2008, 478(1-2): 243-250.
[2]	李祖来, 蒋业华, 叶小梅, 等. WC在WC/灰铸铁复合材料基体中的溶解[J]. 复合材料学报, 2007, 24(2): 13-17. LI Zulai, JIANG Yehua, ZHOU Rong, et al. Process of thermal fatigue crack formation and expansion of WC/iron matrix surface composites[J]. Acta Materiae Compositae Si-nica, 2007, 24(2): 13-17 (in Chinese).
[3]	LANCASTER J K. The influence of substrate hardness on the formation and endurance of molybdenum disulphide films[J]. Wear, 1967, 10(2): 103-107.
[4]	ONUOHA C C, JIN C X, FARHAT Z N, et al. The effects of TiC grain size and steel binder content on the reciprocating wear behaviour of TiC-316 L stainless steel cermets[J]. Wear, 2016, 350-351: 116-129.
[5]	JIN C X, PLUCKNETT K P. Microstructural instability in tic-316l stainless steel cermets[J]. International Journal of Refractory Metals and Hard Materials, 2016, 58: 74-83.
[6]	何林, 刘颖, 李兵红, 等. 放电等离子烧结参数对TiC/Fe复合材料密度和硬度的影响[J]. 粉末冶金工业, 2010, 20(4): 33-37. HE Lin, LIU Ying, LI Binghong, et al. Effects of sintering parameters on TiC/Fe composites produced by spark plasma sintering[J]. Powder Metallurgy Industry, 2010, 20(4): 33-37 (in Chinese).
[7]	MCHUGH P E, CONOLLY P J. Micromechanical modelling of ductile crack growth in the binder phase of WC-Co[J]. Computational Material Science, 2003, 27(4): 423-436.
[8]	NASCIMENTO A M D, OCELíK V, IERARDI M C F, et al. Wear resistance of WCp/Duplex Stainless Steel metal matrix composite layers prepared by laser melt injection[J]. Surface & Coatings Technology, 2008, 202(19): 4758-4765.
[9]	JUHANI K, PIRSO J, VILJUS M, et al. Two-body dry abrasive wear of Cr3C2-Ni cermets[J]. Proc. Estonian Acad. Science. Eng, 2006, 12(4): 368-376.
[10]	杨少锋, 张炎, 蔡云杰, 等. 三维网络结构Al2O3陶瓷高铬铸铁复合材料干摩擦磨损性能[J]. 复合材料学报, 2014, 31(3): 683-691. YANG Shaofeng, ZHANG Yan, CAI Yunjie, et al. Dry friction and wear properties of 3D-meshy Al2O3 ceramic reinforced high chromium iron composites[J]. Acta Materiae Compositae Sinica, 2014, 31(3): 683-691 (in Chinese).
[11]	徐娜, 宋亚平, 张芳, 等. SiCp/Al-2681复合材料的应力-应变曲线和增强颗粒受力模拟[J]. 金属学报, 2007, 43(8): 863-867. XU Na, SONG Yaping, ZHANG Fang, et al. Simulation of stress in reinforcements and stress-strain curve of SiCp/Al-2681 matrix composite[J]. Acta Metallurgica Sinica, 2007, 43(8): 863-867 (in Chinese).
[12]	张伟, 姚建华, 张利春. 激光熔覆原位生成 VC-Fe3C/Fe-Ni复合涂层的组织与性能[J]. 复合材料学报, 2017, 34(1): 142-151. ZHANG Wei, YAO Jianhua, ZHANG Lichun. Microstructure and properties of in-situ synthesized VC-Fe3C/Fe-Ni composite coating made by laser cladding[J]. Acta Materiae Compositae Sinica, 2017, 34(1): 142-151 (in Chinese).
[13]	李秀兵, 刘 琛, 高义民. WCp增强钢基表层复合材料的两体磨粒磨损性能[J]. 铸造, 2006, 55(5): 482-485. LI Xiubing, LIU Chen, GAO Yimin. The two-body abrasive wear of wc particle reinforced steel[J]. Foundry, 2006, 55(5): 482-485 (in Chinese).
[14]	侯书增, 鲍崇高, 翟彬彬. WCp-NiCrBSi/耐热钢复合材料的界面特性及其高温磨损性能[J]. 复合材料学报, 2013, 30(5): 125-131. HOU Shuzeng, BAO Chonggao, ZAI Binbin. Interfacial characteristics and elevated temperature wear behavior of WCp-NiCrBSi/refractory steel composit[J]. Acta Materiae Compositae Sinica, 2013, 30(5): 125-131 (in Chinese).
[15]	彭思源. WC 颗粒增强铁基复合堆焊层性能研究[D]. 合肥: 安徽建筑大学, 2015. PENG Siyuan. Research on property of WC particle reinforced iron-based composite surfacing layer[D]. Hefei: An-hui Jianzhu University, 2015 (in Chinese).
[16]	郑开宏, 高义民, 陈亮, 等. 颗粒增强铁基复合材料的三体磨料磨损性能[J]. 摩擦学报, 2012, 32(2): 176-182. ZHENG Kaihong, GAO Yimin, CHEN Liang, et al. Three-body abrasive wear behavior of iron matrix composites reinforced with tungsten carbide particles[J]. Tribology, 2012, 32(2): 176-182 (in Chinese).
[17]	黄浩科, 李祖来, 山泉, 等. 碳化钨/钢基复合材料的界面重熔[J]. 材料研究学报, 2014, 28(3): 191-196. HUANG Haoke, LI Zulai, SHAN Quan, et al. Interface remelting of tungsten carbide particles reinforced steel composite[J]. Journal of Materials Research, 2014, 28(3): 191-196 (in Chinese).
[18]	杨瑞成, 陈奎, 王凯旋, 等. WC/NiCrMo钢基复合材料的断裂行为及特征[J]. 复合材料学报, 2005, 22(3): 130-134. YANG Ruicheng, CHEN Kui, WANG Kaixuan, et al. Fracture behaviors and characteristics of WC/NiCrMo steel matrix composites[J]. Acta Materiae Compositae Sinica, 2005, 22(3): 130-134 (in Chinese).
[19]	张德峰. 耐磨锰钢组织性能与生产工艺研究 [D]. 兰州: 兰州理工大学, 2006. ZHANG Defeng. Study of structural property and manufacturing technology of wearing manganese steel [D]. Lanzhou: Lanzhou University of Technology, 2006 (in Chinese).
[20]	韩建国, 黄金凤, 陈荫柞, 等. 高碳中铬中锰多元合金钢球磨机衬板及热处理工艺[P]. 中国专利, CN 104745965 A. 2015-07-01. HAN Jianguo, HUANG Jinfeng, CHEN Yinzuo, et al. High carbon-chromium-manganese complex alloy steel of ball mill lining board and its heat treatment process[P]. Chinese patent, CN 104745965 A. 2015-07-01 (in Chinese).
[21]	KIM Y D, CHUNG J Y, KIM J, et al. Formation of nanocrystalline Fe-Co powders produced by mechanical alloying[J]. Materials Science and Engineering A, 2000, 291(1-2): 17-21.
[22]	韦贺, 李祖来, 山泉, 等. WCP体积分数对WCP/Fe复合材料组织及压缩性能的影响[J]. 复合材料学报, 2016, 33 (11): 2560-2568. WEI He, LI Zulai, SHAN Quan, et al. Effect of WCP volume fraction on compression performance of WCP/Fe composites[J]. Acta Materiae Compositae Sinica, 2016, 33 (11): 2560-2568 (in Chinese).

Full-Text