复合材料帽型加筋壁板的失效机制分析与改进设计
Failure mechanism analysis and design of omega stiffened composite panel

DOI: 10.13801/j.cnki.fhclxb.20170626.001

Keywords: 复合材料,加筋壁板,帽型筋条,包覆层,破坏试验,后屈曲
composite,stiffened panel,omega stringer,cladding layer,failure test,post-buckling

Full-Text   Cite this paper   Add to My Lib

Abstract:

References

[1]	DEGENHARDT R, ROLFES R, ZIMMERMANN R, et al. COCOMAT-improved material exploitation of composite airframe structures by accurate simulation of post-buckling and collapse[J]. Composite Structures, 2006, 73(2):175-178.
[2]	ATEVENS K A, RICCI R, DAVIES G A O. Buckling and post-buckling of composite structures[J]. Composites, 1995, 26(3):189-199.
[3]	KONG C W, LEE I C, KIM C G, et al. Post-buckling and failure of stiffened composite panels under axial compression[J]. Composite Structures, 1998, 42(1):13-21.
[4]	孔斌, 叶强, 陈普会, 等. 复合材料整体加筋板轴压后屈曲的承载机制[J]. 复合材料学报, 2010, 27(5):142-149. KONG B, YE Q, CHEN P H, et al. Post-buckling load transfer mechanisms of an integrated composite panel under uniaxial compression[J]. Acta Materiae Compositae Sinica, 2010, 27(5):142-149(in Chinese).
[5]	BERTOLINI J, CASTANIé B, BARRAU J, et al. Multi-level experimental and numerical analysis of composite stiffener debonding. Part 1:Non-specific specimen level[J]. Composite Structures, 2009, 90(4):381-391.
[6]	BERTOLINI J, CASTANIé B, BARRAU J, et al. Multi-level experimental and numerical analysis of composite stiffener debonding. Part 2:Element and panel level[J]. Composite Structures, 2009, 90(4):392-403.
[7]	BENZEGGAGH M L, KENANE M. Measurement of mixed-mode delamination fracture toughness of unidirectional glass/epoxy composite with mixed-mode bending apparatus[J]. Composites Science and Technology, 1996, 56(4):439-449.
[8]	TURON A, DAVILA C G, CAMANHO P P, et al. An engineering solution for mesh size effects in the simulation of delamination using cohesive zone models[J]. Engineering Fracture Mechanics, 2007, 74(10):1665-1682.
[9]	HASHIN Z. Failure criteria for unidirectional fiber composites[J]. Journal of Applied Mechanics, 1980, 47(2):329-335.
[10]	孔斌, 叶强, 陈普会, 等. 复合材料整体加筋板轴压后屈曲失效表征[J]. 复合材料学报, 2010, 27(5):150-155. KONG B, YE Q, CHEN P H, et al. Post-buckling failure characterization of an integrated composite panel under uniaxial compression[J]. Acta Materiae Compositae Sinica, 2010, 27(5):150-155(in Chinese).
[11]	张国凡, 孙侠生, 吴存利, 等. 复合材料整体化多墙盒段渐进式失效分析与试验验证[J]. 复合材料学报, 2016, 33(10):2344-2354. ZHANG G F, SUN X S, WU C L, et al. Progressive failure analysis and test validation of integral multi-spar composite box[J]. Acta Materiae Compositae Sinica, 2016, 33(10):2344-2354(in Chinese).
[12]	ORIFICI A C, ALBERDI I O D Z, THOMSON R S, et al. Compression and post-buckling damage growth and collapse analysis of flat composite stiffened panels[J]. Composites Science and Technology, 2008, 68(15-16):3150-3160.
[13]	ORIFICI A C, THOMSON R S, DEGENHARDT R, et al. Degradation investigation in a post-buckling composite stiffened fuselage panel[J]. Composite Structures, 2008, 82(2):217-224.
[14]	常园园, 许希武, 郭树祥. 压缩载荷下复合材料整体加筋板渐进损伤非线性数值分析[J]. 复合材料学报, 2011, 28(4):202-211. CHANG Y Y, XU X W, GUO S X. Nonlinear progressive damage analysis of integral stiffened composite panels under compressive load[J]. Acta Materiae Compositae Sinica, 2011, 28(4):202-211(in Chinese).
[15]	BERTOLINI J, CASTANIé B, BARRAU J, et al. An experimental and numerical study on omega stringer debonding[J]. Composite Structures, 2008, 86(1-3):233-242.
[16]	BISAGNI C, VESCOVINI R, DáVILA C G. Assessment of the damage tolerance of postbuckled hat-stiffened panels using single-stringer specimens[C]//51 st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials. Orlando:NASA Technical Reports Server, 2010:1-11.
[17]	孙晶晶, 张晓晶, 宫占峰, 等. 复合材料帽型筋条脱粘的失效机理分析[J]. 航空学报, 2013, 34(7):1616-1626. SUN J J, ZHANG X J, GONG Z F, et al. Failure mechanism study on omega stringer debonding[J]. Acta Aeronautica et Astronautica Sinica, 2013, 34(7):1616-1626(in Chinese).
[18]	YETMAN J E, SOBEY A J, BLAKE J I R, et al. Investigation into skin stiffener debonding of top-hat stiffened composite structures[J]. Composite Structures, 2015, 132:1168-1181.
[19]	YU M M, DONG Y G, JIANG F Z, et al. Experiment and analysis of hat-stringer-stiffened composite curved panels under axial compression[J]. Composite Structures, 2015, 123:150-160.
[20]	ABAQUS. ABAQUS/standard user's manual, Version 6.12[M]. Rhode Island, USA:Hibbit, Karlsson and Sorensen Inc, 2012.

Full-Text